centos 6.4 fdisk分区、格式化、挂载新硬盘

1、# fdisk -l

查看当前磁盘信息，就会发现最下面显示新加入的硬盘不是有效分区，如下：

[root@mfsdata02 ~]# fdisk -l

Disk /dev/sda: 10.7 GB, 10737418240 bytes

255 heads, 63 sectors/track, 1305 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x000601be

DeviceBoot Start End Blocks Id System

/dev/sda1 * 1 26 204800 83 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2 26 91 524288 82 Linux swap / Solaris

Partition 2 does not end on cylinder boundary.

/dev/sda3 91 1306 9755648 83 Linux

Disk /dev/sdb: 2147 MB, 2147483648 bytes

255 heads, 63 sectors/track, 261 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

2、# fdisk /dev/sdb

对新硬盘分区，并根据提示进一步操作：

[root@mfsdata02 ~]# fdisk /dev/sdb

Device contains neither a valid DOS partitiontable, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier0x0467cb4f.

Changes will remain in memory only, until youdecide to write them.

After that, of course, the previous content won'tbe recoverable.

Warning: invalid flag 0x0000 of partition table 4will be corrected by w(rite)

WARNING: DOS-compatible mode is deprecated. It'sstrongly recommended to

switch off the mode (command 'c') and change display units to

sectors (command 'u').

Command (m for help): m

Command action

a toggle a bootable flag

b edit bsd disklabel

c toggle the dos compatibility flag

d delete a partition

l list known partition types

m print this menu

n add a new partition

o create a new empty DOS partition table

p print the partition table

q quit without saving changes

s create a new empty Sun disklabel

t change a partition's system id

u change display/entry units

v verify the partition table

w write table to disk and exit

x extra functionality (experts only)

Command (m for help): p

Disk /dev/sdb: 2147 MB, 2147483648 bytes

255 heads, 63 sectors/track, 261 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0467cb4f

DeviceBoot Start End Blocks Id System

Command (m for help): n #输入n进行分区

Command action

e extended #e为逻辑分区

p primary partition (1-4) #p为主分区

p

Partition number (1-4): 1 #（由于是新盘我们输入1来分第一个主分区，共可以分4个主分区）

#（选择该分区的起始磁盘数，如无特殊需求强烈建议选择默认，也就是1来分区（可直接按回车））

First cylinder (1-261, default 1):

Using default value 1

#定义该分区的大小，如果按默认（按回车）即是使用全部可用存储额，如分一个1G的空间，输入+1024m

Last cylinder, +cylinders or +size{K,M,G} (1-261,default 261):

Using default value 261

Command (m for help): p

Disk /dev/sdb: 2147 MB, 2147483648 bytes

255 heads, 63 sectors/track, 261 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0467cb4f

DeviceBoot Start End Blocks Id System

/dev/sdb1 1 261 2096451 83 Linux

Command (m for help): w #w写入分区

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

You have new mail in /var/spool/mail/root

3、# fdisk -l

可以找到我们刚才分的一个分区，内容如下：

[root@mfsdata02 ~]# fdisk -l

Disk /dev/sda: 10.7 GB, 10737418240 bytes

255 heads, 63 sectors/track, 1305 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x000601be

DeviceBoot Start End Blocks Id System

/dev/sda1 * 1 26 204800 83 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2 26 91 524288 82 Linux swap / Solaris

Partition 2 does not end on cylinder boundary.

/dev/sda3 91 1306 9755648 83 Linux

Disk /dev/sdb: 2147 MB, 2147483648 bytes

255 heads, 63 sectors/track, 261 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0467cb4f

DeviceBoot Start End Blocks Id System

/dev/sdb1 1 261 2096451 83 Linux

[root@mfsdata02 ~]#

使用工具partprobe让kernel读取分区信息

[root@mfsdata02 ~]# partprobe

使用fdisk工具只是将分区信息写到磁盘，如果需要mkfs磁盘分区则需要重启系统，而使用partprobe则可以使kernel重新读取分区 信息，从而避免重启系统。

4、# mkfs -t ext4 -c /dev/sdb1

对分区使用ext3格式化，-c参数要先检测磁盘坏道

[root@mfsdata02 ~]# mkfs -t ext4 -c /dev/sdb1

mke2fs 1.41.12 (17-May-2010)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

131072 inodes, 524112 blocks

26205 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=536870912

16 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912

Checking for bad blocks (read-only test): done

Writing inode tables: done

Creating journal (8192 blocks): done

Writing superblocks and filesystem accountinginformation: done

This filesystem will be automatically checked every27 mounts or

180 days, whichever comes first. Use tune2fs -c or -i to override.

5 新建挂载目录

[root@mfsdata02 ~]# mkdir /mfsdata

6 挂载新硬盘

[root@mfsdata02 ~]# mount /dev/sdb1 /mfsdata

7查看分区大小是否和我们预定的一样

[root@mfsdata02 ~]# df -h

Filesystem Size Used Avail Use% Mounted on

/dev/sda3 9.1G 2.2G 6.5G 25% /

tmpfs 238M 0 238M 0% /dev/shm

/dev/sda1 190M 54M 127M 30% /boot

/dev/sdb1 2.0G 3.0M 1.9G 1% /mfsdata

[root@mfsdata02 ~]#

You have new mail in /var/spool/mail/root

[root@mfsdata02 ~]#

[root@mfsdata02 ~]#

8、最后也是很容易漏掉的一步

[root@mfsdata02 ~]# echo "/dev/sdb1 /mfsdata ext4 defaults 0 0" >>/etc/fstab

[root@mfsdata02 ~]# cat /etc/fstab

#

# /etc/fstab

# Created by anaconda on Sat Jun 13 23:57:00 2015

#

# Accessible filesystems, by reference, aremaintained under '/dev/disk'

# See man pages fstab(5), findfs(8), mount(8)and/or blkid(8) for more info

#

UUID=a99b2855-789d-452d-9b44-aaf00b18fc76 / ext4 defaults 1 1

UUID=c229857f-d99f-40f0-bfa6-f68882e7a6a5/boot ext4 defaults 1 2

UUID=c2b1447f-6766-4a54-9764-c5b4fd723ca9 swap swap defaults 0 0

tmpfs /dev/shm tmpfs defaults 0 0

devpts /dev/pts devpts gid=5,mode=620 0 0

sysfs /sys sysfs defaults 0 0

proc /proc proc defaults 0 0

/dev/sdb1 /mfsdata ext4 defaults 0 0

[root@mfsdata02 ~]#

如果忘了将这个写入配置文件的话，服务器如果重启，硬盘将不会自动挂载，将找不到挂载的文件夹。这时候要再一直mount 挂载一遍。。。