【已解决】Genymotion, “Unable to load VirtualBox engine”
2015-10-25 20:26
435 查看
系统:win10 64bit
Genymotion版本:2.5.4
VirtualBox版本:5.0.4
今天打算试试Genymotion这个模拟器,然后从官网下载了最新版:https://www.genymotion.com/#!/download
可是安装后启动出现以下错误:
Virtualization engine not found. Plugin loading aborted.
根据提示定位到日志目录,打开这个日志文件:general-genymotion.log
如下图:
Progress state: E_FAIL
VBoxManage.exe: error: Failed to create the host-only adapter
VBoxManage.exe: error: Querying NetCfgInstanceId failed (0x00000000)
VBoxManage.exe: error: Details: code E_FAIL (0x80004005), component HostNetworkInterfaceWrap, interface IHostNetworkInterface
VBoxManage.exe: error: Context: "enum RTEXITCODE __cdecl handleCreate(struct HandlerArg *)" at line 71 of file VBoxManageHostonly.cpp"
10月 25 17:36:13 [Genymotion] [Error] failed to create host only interface
10月 25 17:36:13 [Genymotion] [Error] "Fail to load vboxmanage plugin from D:/Program Files/Genymobile/Genymotion/plugins/"
10月 25 17:36:13 [Genymotion] [Error] VM Engine failed to load
10月 25 17:36:13 [Genymotion] [Error] Unable to find VM Engine. Plugin loading aborted.
根据提示可知是vbox设置host网络适配器出错了,可能原因为,vbox没有获得管理员权限,所以安装genymotion-2.5.4-vbox.exe
这个程序时,必须以管理员身份运行,之后一路Next就行了。。。
目前正在下载虚拟设备中,(●'◡'●)
如果还不行就参考以下步骤,我也试了一遍,完全可行。
Run VirtualBox as administrator (By default is installed in C:\Program Files\Oracle\VirtualBox)
Go to File -> Preferences -> Network (Left Navigation List) -> Host-only Networks (on the right tab)
Select an adapter and click edit (the small screwdriver on the
right)
On "Adapter" tab set
IPv4 Address: 192.168.1.201
IPv4 Network Mask: 255.255.255.0
On DHCP Server Tab set
Server Address: 192.168.1.100
Server Mask: 255.255.255.0
Lower Address Bound: 192.168.1.101
Upper Address Bound: 192.168.1.199
Click Ok (Host-only Network details), click Ok (VM Settings)
Open Genymotion (as Admin), install a new virtual device (you have deleted all past devices) and start it
以上步骤引用自:http://stackoverflow.com/questions/31709084/genymotion-problems-in-windows-10
Genymotion版本:2.5.4
VirtualBox版本:5.0.4
今天打算试试Genymotion这个模拟器,然后从官网下载了最新版:https://www.genymotion.com/#!/download
可是安装后启动出现以下错误:
Virtualization engine not found. Plugin loading aborted.
根据提示定位到日志目录,打开这个日志文件:general-genymotion.log
如下图:
Progress state: E_FAIL
VBoxManage.exe: error: Failed to create the host-only adapter
VBoxManage.exe: error: Querying NetCfgInstanceId failed (0x00000000)
VBoxManage.exe: error: Details: code E_FAIL (0x80004005), component HostNetworkInterfaceWrap, interface IHostNetworkInterface
VBoxManage.exe: error: Context: "enum RTEXITCODE __cdecl handleCreate(struct HandlerArg *)" at line 71 of file VBoxManageHostonly.cpp"
10月 25 17:36:13 [Genymotion] [Error] failed to create host only interface
10月 25 17:36:13 [Genymotion] [Error] "Fail to load vboxmanage plugin from D:/Program Files/Genymobile/Genymotion/plugins/"
10月 25 17:36:13 [Genymotion] [Error] VM Engine failed to load
10月 25 17:36:13 [Genymotion] [Error] Unable to find VM Engine. Plugin loading aborted.
根据提示可知是vbox设置host网络适配器出错了,可能原因为,vbox没有获得管理员权限,所以安装genymotion-2.5.4-vbox.exe
这个程序时,必须以管理员身份运行,之后一路Next就行了。。。
目前正在下载虚拟设备中,(●'◡'●)
如果还不行就参考以下步骤,我也试了一遍,完全可行。
Run VirtualBox as administrator (By default is installed in C:\Program Files\Oracle\VirtualBox)
Go to File -> Preferences -> Network (Left Navigation List) -> Host-only Networks (on the right tab)
Select an adapter and click edit (the small screwdriver on the
right)
On "Adapter" tab set
IPv4 Address: 192.168.1.201
IPv4 Network Mask: 255.255.255.0
On DHCP Server Tab set
Server Address: 192.168.1.100
Server Mask: 255.255.255.0
Lower Address Bound: 192.168.1.101
Upper Address Bound: 192.168.1.199
Click Ok (Host-only Network details), click Ok (VM Settings)
Open Genymotion (as Admin), install a new virtual device (you have deleted all past devices) and start it
以上步骤引用自:http://stackoverflow.com/questions/31709084/genymotion-problems-in-windows-10
相关文章推荐
- POJ 3041 Asteroids(最大匹配数=最小点覆盖)
- 游戏服务器编程
- tomcat ip地址访问项目 映射共享目录
- Servlet+Ajax实现数据判定操作
- ARM9开发板FL2440移植Linux-3.0内核————dm9000网卡的移植
- tomcat配置多个web网站的配置详解
- iOS 将二进制数据转换成十六进制字符串
- Android Handler之使用小结
- 10.24作业
- 斐波那契数列-题解
- hdu 1728 bfs 终于AC了
- E哥的Git教程(六)config配置
- 加密软件推荐PGP、TrueCrypt、GPG
- 面向对象编程
- 简介Customer Care Accelerator (CCA)
- 分布式系统与集群的区别
- 扩展欧几里德算法、证明及其应用
- linux下Make编译出错,输入/输出错误原因及解决办法
- const 使用
- E哥的Git教程(五)公司代码提交流程