Kernel compiling for Pi 2

https://www.raspberrypi.org/forums/viewtopic.php?f=66&t=101188&p=807579&hilit=cross+compile+pi+source+code#p807579
http://blog.retep.org/2012/07/08/compiling-a-kernel-on-the-raspberry-pi/ http://blog.csdn.net/jinzheng_2010/article/details/8676213 http://tieba.baidu.com/p/3285267721?pid=57194282015&cid=0#57194282015 http://blog.csdn.net/embbnux/article/details/17394793 http://bbs.elecfans.com/forum.php?mod=viewthread&tid=455214&extra= https://github.com/notro/fbtft http://www.eeboard.com/bbs/thread-41500-1-1.html
编译内核的时候，.config文件最好从现成的板子上拷贝出来，这样就免去了自己选择配置menuconfig的麻烦，具体参见：

http://blog.csdn.net/jinzheng_2010/article/details/8676213

by Seabug » Sat Feb 21, 2015 4:20 pm
Hi,

I am trying to compile the Raspbian kernel for my new Pi 2 ( I need support for ELO / Egalax Touch).
I can't find any hints how to configure the kernel sources / Makefile to generate me a kernel7.img
Anyone, who can help ?

Thanks, Steffen

Posts: 7Joined: Sat Feb 21, 2015 3:55 pm

by n1ks » Sat Feb 21, 2015 10:06 pm
Steffen,

Hi, when compiling for the
RPI.v2 i used bcm2709_defconfig for the config instead of
bcmrpi_defconfig. Other than that, the steps are the same as compiling
for rpi.v1.
Once cross compile was complete i copied arch/arm/boot/Image (or zImage for a smaller kernel) to kernel7.img then copied it on to the sd card.

Hope that makes sense.

nik

Posts: 9Joined: Sat Jan 24, 2015 8:51 pm

by Seabug » Sun Feb 22, 2015 1:25 pm
Thanks, Nik.
I got the kernel compiled now (build on the Pi 2 with the power of 4 processor kernels

).
Steffen

Posts: 7Joined: Sat Feb 21, 2015 3:55 pm

by wyattwong » Sun Feb 22, 2015 3:01 pm



Can you provide the steps to compile the kernel and generate kernel.img and kernel7.img ? Maybe a simple tutorial ?

What's the difference between kernel.img and kernel7.img ?

Posts: 18Joined: Fri Mar 15, 2013 3:18 pmLocation: Hong Kong

by Seabug » Mon Feb 23, 2015 12:27 pm
Actually I followed the instruction in the manual.
Since I was new to kernel compiling too, I made the assumption that the compiling generates both images, which is wrong.
The
difference is made by the .config file, which determins the
architecture. However, the make generates a compressed image and a
uncompressed image.
To generate a Pi2 Image, you can use bcm2709_defconfig instead of bcmrpi_defconfig to prepare your .config file.
After I used menuconfig to find and activate my modules.
It was quite time consuming, so I opened the .config with vi and just changed the entries for my elo and egalax touch.
The compiling worked fine. I had problems using the uncompressed kernel, but the zimage worked fine.
However, I still didn't get my touch-screens working, but this seems to bee a problem of the device aliases.
Still working on it.

Steffen

Posts: 7Joined: Sat Feb 21, 2015 3:55 pm

by n1ks » Tue Feb 24, 2015 12:40 pm
If you run rpi-update you should find egalax
touchscreen module has now been added to the kernel. (Have tested on
vanilla Raspbian install using rpi v.2)

Cross-compile is no longer required.




You will however still need to calibrate the screen using xinput_calibrator.

nik

Posts: 9Joined: Sat Jan 24, 2015 8:51 pm

by eriktheitalian » Tue Feb 24, 2015 12:47 pm
I'm curious about BFS cpu scheduler patch. Is it effective or not ?
I cant using enough English language. My writings can be wrong grammer.$
"in micro$oft we not trust"





Posts: 355Joined: Thu Feb 19, 2015 1:03 pm

by Seabug » Tue Feb 24, 2015 1:24 pm



Hi Nik,

I found some posts regarding the activated Egalax in the kernel config.
When I copied the sources, it was already activ in the config, but compiled kernels not yet available.
I am really looking forward to this. Anyway I still need ELO too, so I will have to compile my own kernel.
Compiling with make -j 6 is fast. I am to lazy to switch hard disks to Ubuntu in my PC and did not yet try to cross compile it under FreeBSD, even thought the ARM cross compiler is available under FreeBSD too. Maybe I will give it a try in the next days.
ELO/Penmount and Egal touch screens are quite cheap now and I see many Pi projects going on with it.
I actually plan to replace a ARM-Linux based PLC, which has touch support - but I don't need IO cards.
I will use remote IOs, so the Pi 2 is much more versatile, much faster and cheaper too.
I just could not yet find any help regarding the unrecognised Penmount touch.

Regards, Steffen

Update: I got it working


All touchscreens included, ELO, Egalax, Penmount.
Have some issues with xinput_calibration, values are in wrong order, but once you know, you can correct manually.
BTW: Compiling the kernel in exactly 2.5h


Posts: 7Joined: Sat Feb 21, 2015 3:55 pm

by andrea.cane » Tue Aug 25, 2015 6:10 pm
Hello

is very interesting I'm in the same situation, I have a LCD touchscrenn and would like to compile
a kernel with all drivers for supported touch because I do not know
what is the mine, but I can not find a guide that will explain step by
step clear

how to fill the new kernel, you may share it with me and also with the group the steps or help you followed to be able to compile without error.

thanks in advance and good work


Posts: 3Joined: Tue Jul 28, 2015 11:23 am

by Seabug » Wed Aug 26, 2015 8:24 am
Hi Andrea,

please take a look at my post
from February 23rd. I used vi (or any other editor) to modify the
.config file, rather than using the script. Currently I am in my Vietnam
office and I have not touchscreen here, but in around 10 days I will
return to Germany and compile a new kernel. I can send you the result or also the .config file for further modifications.

regards, Steffen

Posts: 7Joined: Sat Feb 21, 2015 3:55 pm

by andrea.cane » Wed Aug 26, 2015 9:02 am
thanks
i am in the same situation that you
was in february, you talk to following the manual, which kind of manual
have you followed. i want to learn how compile the new kernels because in the future i will be able to replay and rebuild another to follow my different goals.
i can modify the file .config and add all driver for the touch screen with a command

mkdir ../kernel
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- bcmrpi_cutdown_defconfig
make O=../kernel/ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- xconfig

after that, i can compile (20 minute) but i don't know what i have to do after.

best regard andrea