Linux NetHogs监控工具介绍(转)
2015-08-24 22:05
603 查看
NetHogs介绍
NetHogs是一款开源、免费的,终端下的网络流量监控工具,它可监控Linux的进程或应用程序的网络流量。NetHogs只能实时监控进程的网络带宽占用情况。NetHogs支持IPv4和IPv6协议,支持本地网卡以及PPP链接。
官方介绍如下:
NetHogs is a small 'net top' tool. Instead of breaking the traffic down per protocol or per subnet, like most tools do, it groups bandwidth by process. NetHogs does not rely on a special kernel module to be loaded. If there's suddenly a lot of network traffic, you can fire up NetHogs and immediately see which PID is causing this. This makes it easy to indentify programs that have gone wild and are suddenly taking up your bandwidth.
NetHogs下载
NetHogs的开源代码在sourceforge上提供下载,它只提供源代码下载。http://sourceforge.net/projects/nethogs/?source=directory。如果你需要下载RPM安装包,可以去这个网址下载
Ubuntu下NetHogs安装
sudo apt-get install nethogs
ReadHat下NetHogs安装
源码安装由于测试过程安装失败,再次不做讲述
NetHogs使用
[root@localhost tmp]#nethogs
NetHogs提供交互式控制指令:
m : Cycle between display modes (kb/s, kb, b, mb) 切换网速显示单位
r : Sort by received. 按接收流量排序
s : Sort by sent. 按发送流量排序
q : Quit and return to the shell prompt. 退出NetHogs命令工具
NetHogs 命令行参数
常用的参数:
-d delay for refresh rate. 数据刷新时间 如nethogs -d 1 就是每秒刷新一次
-h display available commands usage. 显示命名帮助、使用信息
-p sniff in promiscious mode (not recommended).
-t tracemode.
-V prints Version info.
演示例子:
#5秒刷新一次数据
nethogs -d 5
#监控网卡eth0数据
nethogs eth0
#同时监视eth0和eth1接口
nethogs eth0 eth1
#将监控日志写入日志文件 nethogs >>test.log
参考资料:
http://rpm.pbone.net/index.php3/stat/4/idpl/17273936/dir/redhat_el_6/com/nethogs-0.8.0-1.el6.x86_64.rpm.html
http://sourceforge.net/projects/nethogs/?source=directory
http://www.cnblogs.com/kerrycode/p/4748970.html
NetHogs是一款开源、免费的,终端下的网络流量监控工具,它可监控Linux的进程或应用程序的网络流量。NetHogs只能实时监控进程的网络带宽占用情况。NetHogs支持IPv4和IPv6协议,支持本地网卡以及PPP链接。
官方介绍如下:
NetHogs is a small 'net top' tool. Instead of breaking the traffic down per protocol or per subnet, like most tools do, it groups bandwidth by process. NetHogs does not rely on a special kernel module to be loaded. If there's suddenly a lot of network traffic, you can fire up NetHogs and immediately see which PID is causing this. This makes it easy to indentify programs that have gone wild and are suddenly taking up your bandwidth.
NetHogs下载
NetHogs的开源代码在sourceforge上提供下载,它只提供源代码下载。http://sourceforge.net/projects/nethogs/?source=directory。如果你需要下载RPM安装包,可以去这个网址下载
Ubuntu下NetHogs安装
sudo apt-get install nethogs
ReadHat下NetHogs安装
[root@localhost tmp]#rpm -ivh nethogs-0.8.0-1.el6.x86_64.rpm
warning: nethogs-0.8.0-1.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 0608b895: NOKEY
Preparing... ########################################### [100%]
1:nethogs ########################################### [100%]
[root@localhost tmp]#
源码安装由于测试过程安装失败,再次不做讲述
NetHogs使用
[root@localhost tmp]#nethogs
NetHogs提供交互式控制指令:
m : Cycle between display modes (kb/s, kb, b, mb) 切换网速显示单位
r : Sort by received. 按接收流量排序
s : Sort by sent. 按发送流量排序
q : Quit and return to the shell prompt. 退出NetHogs命令工具
NetHogs 命令行参数
常用的参数:
-d delay for refresh rate. 数据刷新时间 如nethogs -d 1 就是每秒刷新一次
-h display available commands usage. 显示命名帮助、使用信息
-p sniff in promiscious mode (not recommended).
-t tracemode.
-V prints Version info.
演示例子:
#5秒刷新一次数据
nethogs -d 5
#监控网卡eth0数据
nethogs eth0
#同时监视eth0和eth1接口
nethogs eth0 eth1
#将监控日志写入日志文件 nethogs >>test.log
参考资料:
http://rpm.pbone.net/index.php3/stat/4/idpl/17273936/dir/redhat_el_6/com/nethogs-0.8.0-1.el6.x86_64.rpm.html
http://sourceforge.net/projects/nethogs/?source=directory
http://www.cnblogs.com/kerrycode/p/4748970.html
相关文章推荐
- Linux服务器杀马(转)
- linux环境下的一种退出后快速返回的方法
- Linux系统性能监控工具介绍之-tsar
- Linux 的cp命令
- 关于一些Linux命令的整理(就业班第三次作业)
- 命令cd,pwd,tty,whereis,which,stat,echo,shutdown,halt,reboot,powerof
- Linux运维工程师入门须掌握的10个技术点
- Linux命令详解(4):chgrp,chown,chmod
- Linux 简单命令查询CPU、内存、网卡等信息
- linux ssh远程登录原理及中断原理
- Linux命令之文件管理命令cp、mv、rm
- How to use python remove the '^M' when copy words from Windows to Linux
- Linux 内核态与用户态
- Linux:awk命令详解
- 2015-08-24 part4 kernel/linux3.0 移植
- Centos6.5里安装Hbase(伪分布式)
- 解决 RHEL 7/ CentOS 7/Fedora 出现Unit iptables.service failed to load
- Linux命令之目录管理类命令:mkdir, rmdir, tree, dirname, basename
- Linux系统启动流程
- 【Linux命令详解】2、文件和目录操作管理―(pwd、cd、ls、mkdir、rmdir、tree)