C++14系列(1):Linux下C++14开发环境配置
2015-08-13 17:11
603 查看
g++安装
参考地址:http://sysads.co.uk/2014/07/install-gcc-gnu-4-9-1-on-ubuntu-14-04/
当前Ubuntu的LTS版本为14.04,直接在apt-get命令安装的g++到不了5.0版本,不能获得全部的c++14的支持,所以必须安装5.0以上版本的g++,这里的方法如下:
sudo add-apt-repository ppa:ubuntu-toolchain-r/test sudo apt-get update sudo apt-get install g++-5
– Remove the previous g++ version from the default applications list (if already exists)
sudo update-alternatives --remove-all gcc
– Make G++ 5 the default compiler on the system
sudo update-alternatives –install /usr/bin/g++ g++ /usr/bin/g++-5 20
sudo update-alternatives –config g++
使用
g++ --version
查看g++版本信息
Eclipse CDT安装
到Eclipse开源工程网站下载新版的CDT开发环境,需要先安装好JAVA运行环境,网上一搜都是,略。Eclipse CDT内部配置与工程配置
参考:http://stackoverflow.com/questions/9131763/eclipse-cdt-c11-c0x-support
在建立工程前,配置 Eclipse syntax parser:
具体步骤:
Window -> Preferences -> C/C++ -> Build -> Settings -> Discovery -> CDT GCC Build-in Compiler Settings
在 Command to get compiler specs 加上 -std=c++14
新建一个C++工程:
For project created as: File -> New -> Project -> C/C++ -> C++ Project
右击工程打开属性:
Properties -> C/C++ Build -> Settings -> Tool Settings -> GCC C++ Compiler -> Dialect
加上 -std=c++14 到 other dialect flags
另外,为了解析和索引新版的一些语法:
Properties -> C/C++ General -> Preprocessor Include Paths, Marcos etc. -> Providers
enable CDT GCC Build-in Compiler Settings and move it higher then Contributed PathEntry Containers (重要)
最后
重新编译
重新生成索引: Project ->C/C++ Index
重启 Eclipse.
开始C++14之旅
开始拍代码吧~相关文章推荐
- Linux socket 初步
- 使用C++实现JNI接口需要注意的事项
- 10 篇对初学者和专家都有用的 Linux 命令教程
- Linux 与 Windows 对UNICODE 的处理方式
- Ubuntu12.04下QQ完美走起啊!走起啊!有木有啊!
- 解決Linux下Android开发真机调试设备不被识别问题
- 运维入门
- 运维提升
- Linux 自检和 SystemTap
- Ubuntu Linux使用体验
- c语言实现hashmap(转载)
- Linux 信号signal处理机制
- linux下mysql添加用户
- 关于指针的一些事情
- Scientific Linux 5.5 图形安装教程
- 基于 Linux 集群环境上 GPFS 的问题诊断
- 谁是桌面王者?Win PK Linux三大镇山之宝
- vivi下重新调整分区
- Linux VS Unix:Linux欲一统天下 Unix不死