[Linux]vbox 虚拟机添加新磁盘
2015-07-14 11:39
507 查看
情况是这样的,开始创建虚拟机的时候硬盘设置太小了,只有10g,我现在通过vbox的设置给这个linux(centos6.6)虚拟机添加了一块硬盘。
下面的操作就是怎么把硬盘挂载到系统中。
操作完之后我们再来看磁盘信息
多了一块分区信息
可以看下参考 e2label命令
检查一下
为了开机自动挂载,还需要编辑
有些可能对这个配置文件不太熟悉,请参见[fatab中文解释](https://wiki.archlinux.org/index.php/Fstab_(%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87)
然后重启下,再次查看挂载情况,正常挂载,成功。
下面的操作就是怎么把硬盘挂载到系统中。
通过 fdisk查看现在物理磁盘的信息(这个要用root权限才行)
以下操作均是root权限。[root@orangleliu ~]# fdisk -l ... Disk /dev/sdb: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 ...
写分区表
下面是个交互是过程,每次输入之后根据提示,在进行输入[root@orangleliu ~]# fdisk /dev/sdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel with disk identifier 0xa4378777. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-3916, default 1): Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-3916, default 3916): Using default value 3916 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
操作完之后我们再来看磁盘信息
# fdisk -l ... Disk /dev/sdb: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa4378777 Device Boot Start End Blocks Id System /dev/sdb1 1 3916 31455238+ 83 Linux ...
多了一块分区信息
格式化分区
一个命令就可以搞定了# mkfs.ext4 /dev/sdb1 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 1966080 inodes, 7863809 blocks 393190 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 240 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 26 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
创建新卷标(可忽略)
这一步,我看到有些人做了,有些人没有做,于是查了下资料。可以看下参考 e2label命令
后面没用上,可以不操作的。
# e2label /dev/sdb1 /data
检查一下
# e2label /dev/sdb1 /data
挂载
创建挂载目录,跟上一步一致mkdir /data
为了开机自动挂载,还需要编辑
/etc/fstab文件,文件后面添加一行
/dev/sdb1 /data ext4 defaults 0 0
有些可能对这个配置文件不太熟悉,请参见[fatab中文解释](https://wiki.archlinux.org/index.php/Fstab_(%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87)
测试
# mount -a # df -lh Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_orangleliu-lv_root 6.5G 3.2G 3.0G 52% / tmpfs 499M 0 499M 0% /dev/shm /dev/sda1 477M 29M 424M 7% /boot /dev/sdb1 30G 44M 28G 1% /data
然后重启下,再次查看挂载情况,正常挂载,成功。
相关文章推荐
- Linux socket 初步
- 10 篇对初学者和专家都有用的 Linux 命令教程
- Linux 与 Windows 对UNICODE 的处理方式
- Ubuntu12.04下QQ完美走起啊!走起啊!有木有啊!
- 解決Linux下Android开发真机调试设备不被识别问题
- 运维入门
- 运维提升
- Linux 自检和 SystemTap
- Ubuntu Linux使用体验
- c语言实现hashmap(转载)
- Linux 信号signal处理机制
- linux下mysql添加用户
- Scientific Linux 5.5 图形安装教程
- 基于 Linux 集群环境上 GPFS 的问题诊断
- 谁是桌面王者?Win PK Linux三大镇山之宝
- vivi下重新调整分区
- Linux VS Unix:Linux欲一统天下 Unix不死
- linux下设定环境变量
- Linux下修改MySQL编码的方法