Solaris 10 改ip参考文档之二

参考自：Cannot change IP address of Solaris[TM] 10 host (Doc ID 1007942.1)

本文不做翻译，全文转载。

Symptoms

Changing the IP address in /etc/hosts (linked to /etc/inet/hosts) and rebooting does not change the primary interface's address.

Resolution

Change the entry for the host in /etc/inet/ipnodes.

Additional Information

Prior to Solaris[TM] 10, IPv6 was not enabled by default. So there would only be entries in /etc/inet/ipnodes for any systems you may want to use IPv6 with.

The host itself is only (by default) in /etc/inet/hosts.  Therefore changes to /etc/inet/hosts would be effective on the next reboot.
Starting in Solaris 10, the host has entries in both /etc/inet/hosts and /etc/inet/ipnodes.  Both files should be kept in sync; however, if they do not match, ipnodes has precedence.  If ipnodes has the old IP address, changes in /etc/inet/hosts will appear not to have any effect.

Product

Solaris 10 Operating System