imx6sx-sdb.dtb imx6sx-sdb.dts 设备树 (d:\swwork\solo\linux-3.14.28\arch\arm\boot\dts)
2015-06-16 15:36
711 查看
/*
* Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "imx6sx.dtsi"
/ {
model = "Freescale i.MX6 SoloX SDB Board";
compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
chosen {
stdout-path = &uart1;
};
memory {
reg = <0x80000000 0x40000000>;
};
backlight1 {
compatible = "pwm-backlight";
pwms = <&pwm3 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
fb-names = "mxs-lcdif0";
};
backlight2 {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
fb-names = "mxs-lcdif1";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
volume-up {
label = "Volume Up";
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
};
hannstar_cabc {
compatible = "hannstar,cabc";
lvds0 {
gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
};
};
pxp_v4l2_out {
compatible = "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2";
status = "okay";
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_lcd_3v3: lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
gpio = <&gpio3 27 0>;
enable-active-high;
status = "disabled";
};
vcc_sd3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vcc_sd3>;
regulator-name = "VCC_SD3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_psu_5v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "PSU-5V0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
reg_vref_3v3: regulator@2 {
compatible = "regulator-fixed";
regulator-name = "vref-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_usb_otg1_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg1>;
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg2_vbus: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg2>;
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_pcie: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie_reg>;
regulator-name = "MPCIE_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 1 0>;
regulator-always-on;
enable-active-high;
};
};
sound {
compatible = "fsl,imx6q-sabresd-wm8962",
"fsl,imx-audio-wm8962";
model = "wm8962-audio";
cpu-dai = <&ssi2>;
audio-codec = <&codec>;
audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
"Ext Spk", "SPKOUTL",
"Ext Spk", "SPKOUTR",
"AMIC", "MICBIAS",
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <6>;
hp-det-gpios = <&gpio1 17 1>;
};
sound-spdif {
compatible = "fsl,imx-audio-spdif",
"fsl,imx6sx-sdb-spdif";
model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-out;
};
sii902x_reset: sii902x-reset {
compatible = "gpio-reset";
reset-gpios = <&gpio3 27 1>;
reset-delay-us = <100000>;
#reset-cells = <0>;
status = "disabled";
};
};
&adc1 {
vref-supply = <®_vref_3v3>;
status = "okay";
};
&adc2 {
vref-supply = <®_vref_3v3>;
status = "okay";
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&csi1 {
status = "okay";
port {
csi1_ep: endpoint {
remote-endpoint = <&ov5640_ep>;
};
};
};
&csi2 {
status = "okay";
port {
csi2_ep: endpoint {
remote-endpoint = <&vadc_ep>;
};
};
};
&cpu0 {
operating-points = <
/* kHz uV */
996000 1250000
792000 1175000
396000 1175000
198000 1175000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC uV */
996000 1250000
792000 1175000
396000 1175000
198000 1175000
>;
arm-supply = <&sw1a_reg>;
soc-supply = <&sw1a_reg>;
fsl,arm-soc-shared = <1>;
};
&gpc {
/* use ldo-bypass, u-boot will check it and configure */
fsl,ldo-bypass = <1>;
};
&lcdif1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat
&pinctrl_lcdif_ctrl>;
lcd-supply = <®_lcd_3v3>;
display = <&display0>;
status = "disabled";
display0: display {
bits-per-pixel = <16>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <33500000>;
hactive = <800>;
vactive = <480>;
hback-porch = <89>;
hfront-porch = <164>;
14dad
vback-porch = <23>;
vfront-porch = <10>;
hsync-len = <10>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&lcdif2 {
display = <&display1>;
disp-dev = "ldb";
status = "okay";
display1: display {
bits-per-pixel = <16>;
bus-width = <18>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
crtc = "lcdif2";
status = "okay";
display-timings {
native-mode = <&timing1>;
timing1: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
};
};
};
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
&dcic1 {
dcic_id = <0>;
dcic_mux = "dcic-lcdif1";
status = "okay";
};
&dcic2 {
dcic_id = <1>;
dcic_mux = "dcic-lvds";
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
pinctrl-assert-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>, <&gpio2 6 GPIO_ACTIVE_LOW>;
phy-mode = "rgmii";
status = "okay";
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii";
status = "okay";
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
trx-en-gpio = <&gpio4 25 GPIO_ACTIVE_LOW>;
trx-stby-gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
trx-en-gpio = <&gpio4 25 GPIO_ACTIVE_LOW>;
trx-stby-gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio2 0 0>;
status = "okay";
};
&qspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi2_1>;
status = "okay";
#ifndef SPANSIONFLASH
ddrsmp=<0>;
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a";
spi-max-frequency = <29000000>;
spi-nor,ddr-quad-read-dummy = <6>;
reg = <0>;
};
flash1: n25q256a@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a";
spi-max-frequency = <29000000>;
spi-nor,ddr-quad-read-dummy = <6>;
reg = <1>;
};
#endif
};
&pxp {
status = "okay";
};
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
status = "disabled";
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
status = "okay";
};
&ssi2 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart5 { /* for bluetooth */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
fsl,uart-has-rtscts;
status = "okay";
/* for DTE mode, add below change */
/* fsl,dte-mode;*/
/* pinctrl-0 = <&pinctrl_uart5dte_1>; */
};
&usbotg1 {
vbus-supply = <®_usb_otg1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg1_id>;
status = "okay";
};
&usbotg2 {
vbus-supply = <®_usb_otg2_vbus>;
dr_mode = "host";
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
non-removable;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakeup;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
vmmc-supply = <&vcc_sd3>;
status = "okay";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic: pfuze100@08 {
compatible = "fsl,pfuze200";
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
regulator-always-on;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
ov5640: ov5640@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_csi_0>;
clocks = <&clks IMX6SX_CLK_CSI>;
clock-names = "csi_mclk";
AVDD-supply = <&vgen3_reg>; /* 2.8v */
DVDD-supply = <&vgen2_reg>; /* 1.5v*/
pwn-gpios = <&gpio3 28 1>;
rst-gpios = <&gpio3 27 0>;
csi_id = <0>;
mclk = <24000000>;
mclk_source = <0>;
port {
ov5640_ep: endpoint {
remote-endpoint = <&csi1_ep>;
};
};
};
sii902x@39 {
compatible = "SiI,sii902x";
interrupt-parent = <&gpio4>;
interrupts = <21 2>;
mode_str ="1280x720M@60";
bits-per-pixel = <16>;
resets = <&sii902x_reset>;
reg = <0x39>;
status = "disabled";
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_egalax_int>;
interrupt-parent = <&gpio4>;
interrupts = <19 2>;
wakeup-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
mma8451@1c {
compatible = "fsl,mma8451";
reg = <0x1c>;
position = <1>;
interrupt-parent = <&gpio6>;
interrupts = <2 8>;
interrupt-route = <2>;
};
mag3110@0e {
compatible = "fsl,mag3110";
reg = <0x0e>;
position = <2>;
interrupt-parent = <&gpio6>;
interrupts = <5 1>;
shared-interrupt;
};
isl29023@44 {
compatible = "fsl,isl29023";
reg = <0x44>;
rext = <499>;
interrupt-parent = <&gpio6>;
interrupts = <5 1>;
shared-interrupt;
};
};
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
codec: wm8962@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clks IMX6SX_CLK_AUDIO>;
DCVDD-supply = <&vgen4_reg>;
DBVDD-supply = <&vgen4_reg>;
AVDD-supply = <&vgen4_reg>;
CPVDD-supply = <&vgen4_reg>;
MICVDD-supply = <&vgen3_reg>;
PLLVDD-supply = <&vgen4_reg>;
SPKVDD1-supply = <®_psu_5v>;
SPKVDD2-supply = <®_psu_5v>;
amic-mono;
};
};
&vadc {
vadc_in = <0>;
csi_id = <1>;
status = "okay";
port {
vadc_ep: endpoint {
remote-endpoint = <&csi2_ep>;
};
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog &pinctrl_can_gpios>;
imx6x-sdb {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059
MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0xb000
MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21 0x17059
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0
MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0
MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0
MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0
MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
>;
};
pinctrl_canfd1: canfd1grp-1 {
fsl,pins = <
MX6SX_PAD_QSPI1B_DQS__CANFD_TX1 0x1b0b0
MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1 0x1b0b0
>;
};
pinctrl_canfd2: canfd2grp-1 {
fsl,pins = <
MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2 0x1b0b0
MX6SX_PAD_QSPI1A_DQS__CANFD_TX2 0x1b0b0
>;
};
pinctrl_csi_0: csigrp-0 {
fsl,pins = <
MX6SX_PAD_LCD1_DATA07__CSI1_MCLK 0x110b0
MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK 0x110b0
MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC 0x110b0
MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC 0x110b0
MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0 0x110b0
MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1 0x110b0
MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2 0x110b0
MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3 0x110b0
MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4 0x110b0
MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5 0x110b0
MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6 0x110b0
MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7 0x110b0
MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8 0x110b0
MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9 0x110b0
MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x80000000
MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x80000000
>;
};
pinctrl_egalax_int: egalax_intgrp {
fsl,pins = <
MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x80000000
>;
};
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b9
MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000
MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020
MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020
>;
};
pinctrl_gpio_keys: gpio_keysgrp {
fsl,pins = <
MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
>;
};
pinctrl_can_gpios: can-gpios {
fsl,pins = <
MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x17059
MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x17059
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1
>;
};
pinctrl_lcdif_dat: lcdifdatgrp {
fsl,pins = <
MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
>;
};
pinctrl_lcdif_ctrl: lcdifctrlgrp {
fsl,pins = <
MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x110b0
>;
};
pinctrl_qspi2_1: qspi2grp_1 {
fsl,pins = <
MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1
MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1
MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1
MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1
MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1
MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1
MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1
MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1
MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1
MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1
MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1
MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1
>;
};
pinctrl_sai1: sai1grp {
fsl,pins = <
MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x130b0
MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x130b0
MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x120b0
MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x130b0
MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
>;
};
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
>;
};
pinctrl_pcie_reg: pciereggrp {
fsl,pins = <
MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0
>;
};
pinctrl_vcc_sd3: vccsd3grp {
fsl,pins = <
MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
>;
};
pinctrl_uart5dte_1: uart5dtegrp-1 {
fsl,pins = <
MX6SX_PAD_KEY_ROW3__UART5_TX 0x1b0b1
MX6SX_PAD_KEY_COL3__UART5_RX 0x1b0b1
MX6SX_PAD_KEY_ROW2__UART5_RTS_B 0x1b0b1
MX6SX_PAD_KEY_COL2__UART5_CTS_B 0x1b0b1
>;
};
pinctrl_usb_otg1: usbotg1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
>;
};
pinctrl_usb_otg1_id: usbotg1idgrp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
>;
};
pinctrl_usb_otg2: usbot2ggrp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17069
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17069
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17069
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17069
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17069
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17069
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17069
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17069
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17069
MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
>;
};
pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
fsl,pins = <
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
>;
};
pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
fsl,pins = <
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
>;
};
pinctrl_usdhc4_1: usdhc4grp-1 {
fsl,pins = <
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059
MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059
MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059
MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059
>;
};
pinctrl_usdhc4_1_100mhz: usdhc4grp-1-100mhz {
fsl,pins = <
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
>;
};
pinctrl_usdhc4_1_200mhz: usdhc4grp-1-200mhz {
fsl,pins = <
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
>;
};
};
};
* Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "imx6sx.dtsi"
/ {
model = "Freescale i.MX6 SoloX SDB Board";
compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
chosen {
stdout-path = &uart1;
};
memory {
reg = <0x80000000 0x40000000>;
};
backlight1 {
compatible = "pwm-backlight";
pwms = <&pwm3 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
fb-names = "mxs-lcdif0";
};
backlight2 {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
fb-names = "mxs-lcdif1";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
volume-up {
label = "Volume Up";
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
};
hannstar_cabc {
compatible = "hannstar,cabc";
lvds0 {
gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
};
};
pxp_v4l2_out {
compatible = "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2";
status = "okay";
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_lcd_3v3: lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
gpio = <&gpio3 27 0>;
enable-active-high;
status = "disabled";
};
vcc_sd3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vcc_sd3>;
regulator-name = "VCC_SD3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_psu_5v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "PSU-5V0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
reg_vref_3v3: regulator@2 {
compatible = "regulator-fixed";
regulator-name = "vref-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_usb_otg1_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg1>;
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg2_vbus: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg2>;
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_pcie: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie_reg>;
regulator-name = "MPCIE_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 1 0>;
regulator-always-on;
enable-active-high;
};
};
sound {
compatible = "fsl,imx6q-sabresd-wm8962",
"fsl,imx-audio-wm8962";
model = "wm8962-audio";
cpu-dai = <&ssi2>;
audio-codec = <&codec>;
audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
"Ext Spk", "SPKOUTL",
"Ext Spk", "SPKOUTR",
"AMIC", "MICBIAS",
"IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <6>;
hp-det-gpios = <&gpio1 17 1>;
};
sound-spdif {
compatible = "fsl,imx-audio-spdif",
"fsl,imx6sx-sdb-spdif";
model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-out;
};
sii902x_reset: sii902x-reset {
compatible = "gpio-reset";
reset-gpios = <&gpio3 27 1>;
reset-delay-us = <100000>;
#reset-cells = <0>;
status = "disabled";
};
};
&adc1 {
vref-supply = <®_vref_3v3>;
status = "okay";
};
&adc2 {
vref-supply = <®_vref_3v3>;
status = "okay";
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&csi1 {
status = "okay";
port {
csi1_ep: endpoint {
remote-endpoint = <&ov5640_ep>;
};
};
};
&csi2 {
status = "okay";
port {
csi2_ep: endpoint {
remote-endpoint = <&vadc_ep>;
};
};
};
&cpu0 {
operating-points = <
/* kHz uV */
996000 1250000
792000 1175000
396000 1175000
198000 1175000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC uV */
996000 1250000
792000 1175000
396000 1175000
198000 1175000
>;
arm-supply = <&sw1a_reg>;
soc-supply = <&sw1a_reg>;
fsl,arm-soc-shared = <1>;
};
&gpc {
/* use ldo-bypass, u-boot will check it and configure */
fsl,ldo-bypass = <1>;
};
&lcdif1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat
&pinctrl_lcdif_ctrl>;
lcd-supply = <®_lcd_3v3>;
display = <&display0>;
status = "disabled";
display0: display {
bits-per-pixel = <16>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <33500000>;
hactive = <800>;
vactive = <480>;
hback-porch = <89>;
hfront-porch = <164>;
14dad
vback-porch = <23>;
vfront-porch = <10>;
hsync-len = <10>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&lcdif2 {
display = <&display1>;
disp-dev = "ldb";
status = "okay";
display1: display {
bits-per-pixel = <16>;
bus-width = <18>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
crtc = "lcdif2";
status = "okay";
display-timings {
native-mode = <&timing1>;
timing1: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
};
};
};
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
&dcic1 {
dcic_id = <0>;
dcic_mux = "dcic-lcdif1";
status = "okay";
};
&dcic2 {
dcic_id = <1>;
dcic_mux = "dcic-lvds";
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
pinctrl-assert-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>, <&gpio2 6 GPIO_ACTIVE_LOW>;
phy-mode = "rgmii";
status = "okay";
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii";
status = "okay";
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
trx-en-gpio = <&gpio4 25 GPIO_ACTIVE_LOW>;
trx-stby-gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
trx-en-gpio = <&gpio4 25 GPIO_ACTIVE_LOW>;
trx-stby-gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio2 0 0>;
status = "okay";
};
&qspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi2_1>;
status = "okay";
#ifndef SPANSIONFLASH
ddrsmp=<0>;
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a";
spi-max-frequency = <29000000>;
spi-nor,ddr-quad-read-dummy = <6>;
reg = <0>;
};
flash1: n25q256a@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a";
spi-max-frequency = <29000000>;
spi-nor,ddr-quad-read-dummy = <6>;
reg = <1>;
};
#endif
};
&pxp {
status = "okay";
};
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
status = "disabled";
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
status = "okay";
};
&ssi2 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart5 { /* for bluetooth */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
fsl,uart-has-rtscts;
status = "okay";
/* for DTE mode, add below change */
/* fsl,dte-mode;*/
/* pinctrl-0 = <&pinctrl_uart5dte_1>; */
};
&usbotg1 {
vbus-supply = <®_usb_otg1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg1_id>;
status = "okay";
};
&usbotg2 {
vbus-supply = <®_usb_otg2_vbus>;
dr_mode = "host";
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
non-removable;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakeup;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
vmmc-supply = <&vcc_sd3>;
status = "okay";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic: pfuze100@08 {
compatible = "fsl,pfuze200";
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
regulator-always-on;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
ov5640: ov5640@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_csi_0>;
clocks = <&clks IMX6SX_CLK_CSI>;
clock-names = "csi_mclk";
AVDD-supply = <&vgen3_reg>; /* 2.8v */
DVDD-supply = <&vgen2_reg>; /* 1.5v*/
pwn-gpios = <&gpio3 28 1>;
rst-gpios = <&gpio3 27 0>;
csi_id = <0>;
mclk = <24000000>;
mclk_source = <0>;
port {
ov5640_ep: endpoint {
remote-endpoint = <&csi1_ep>;
};
};
};
sii902x@39 {
compatible = "SiI,sii902x";
interrupt-parent = <&gpio4>;
interrupts = <21 2>;
mode_str ="1280x720M@60";
bits-per-pixel = <16>;
resets = <&sii902x_reset>;
reg = <0x39>;
status = "disabled";
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_egalax_int>;
interrupt-parent = <&gpio4>;
interrupts = <19 2>;
wakeup-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
mma8451@1c {
compatible = "fsl,mma8451";
reg = <0x1c>;
position = <1>;
interrupt-parent = <&gpio6>;
interrupts = <2 8>;
interrupt-route = <2>;
};
mag3110@0e {
compatible = "fsl,mag3110";
reg = <0x0e>;
position = <2>;
interrupt-parent = <&gpio6>;
interrupts = <5 1>;
shared-interrupt;
};
isl29023@44 {
compatible = "fsl,isl29023";
reg = <0x44>;
rext = <499>;
interrupt-parent = <&gpio6>;
interrupts = <5 1>;
shared-interrupt;
};
};
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
codec: wm8962@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clks IMX6SX_CLK_AUDIO>;
DCVDD-supply = <&vgen4_reg>;
DBVDD-supply = <&vgen4_reg>;
AVDD-supply = <&vgen4_reg>;
CPVDD-supply = <&vgen4_reg>;
MICVDD-supply = <&vgen3_reg>;
PLLVDD-supply = <&vgen4_reg>;
SPKVDD1-supply = <®_psu_5v>;
SPKVDD2-supply = <®_psu_5v>;
amic-mono;
};
};
&vadc {
vadc_in = <0>;
csi_id = <1>;
status = "okay";
port {
vadc_ep: endpoint {
remote-endpoint = <&csi2_ep>;
};
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog &pinctrl_can_gpios>;
imx6x-sdb {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059
MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0xb000
MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21 0x17059
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0
MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0
MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0
MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0
MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
>;
};
pinctrl_canfd1: canfd1grp-1 {
fsl,pins = <
MX6SX_PAD_QSPI1B_DQS__CANFD_TX1 0x1b0b0
MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1 0x1b0b0
>;
};
pinctrl_canfd2: canfd2grp-1 {
fsl,pins = <
MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2 0x1b0b0
MX6SX_PAD_QSPI1A_DQS__CANFD_TX2 0x1b0b0
>;
};
pinctrl_csi_0: csigrp-0 {
fsl,pins = <
MX6SX_PAD_LCD1_DATA07__CSI1_MCLK 0x110b0
MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK 0x110b0
MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC 0x110b0
MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC 0x110b0
MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0 0x110b0
MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1 0x110b0
MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2 0x110b0
MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3 0x110b0
MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4 0x110b0
MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5 0x110b0
MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6 0x110b0
MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7 0x110b0
MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8 0x110b0
MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9 0x110b0
MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x80000000
MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x80000000
>;
};
pinctrl_egalax_int: egalax_intgrp {
fsl,pins = <
MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x80000000
>;
};
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b9
MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000
MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020
MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020
>;
};
pinctrl_gpio_keys: gpio_keysgrp {
fsl,pins = <
MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
>;
};
pinctrl_can_gpios: can-gpios {
fsl,pins = <
MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x17059
MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x17059
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1
>;
};
pinctrl_lcdif_dat: lcdifdatgrp {
fsl,pins = <
MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
>;
};
pinctrl_lcdif_ctrl: lcdifctrlgrp {
fsl,pins = <
MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x110b0
>;
};
pinctrl_qspi2_1: qspi2grp_1 {
fsl,pins = <
MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1
MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1
MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1
MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1
MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1
MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1
MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1
MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1
MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1
MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1
MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1
MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1
>;
};
pinctrl_sai1: sai1grp {
fsl,pins = <
MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x130b0
MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x130b0
MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x120b0
MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x130b0
MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
>;
};
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
>;
};
pinctrl_pcie_reg: pciereggrp {
fsl,pins = <
MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0
>;
};
pinctrl_vcc_sd3: vccsd3grp {
fsl,pins = <
MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
>;
};
pinctrl_uart5dte_1: uart5dtegrp-1 {
fsl,pins = <
MX6SX_PAD_KEY_ROW3__UART5_TX 0x1b0b1
MX6SX_PAD_KEY_COL3__UART5_RX 0x1b0b1
MX6SX_PAD_KEY_ROW2__UART5_RTS_B 0x1b0b1
MX6SX_PAD_KEY_COL2__UART5_CTS_B 0x1b0b1
>;
};
pinctrl_usb_otg1: usbotg1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
>;
};
pinctrl_usb_otg1_id: usbotg1idgrp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
>;
};
pinctrl_usb_otg2: usbot2ggrp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17069
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17069
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17069
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17069
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17069
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17069
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17069
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17069
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17069
MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
>;
};
pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
fsl,pins = <
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
>;
};
pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
fsl,pins = <
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
>;
};
pinctrl_usdhc4_1: usdhc4grp-1 {
fsl,pins = <
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059
MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059
MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059
MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059
>;
};
pinctrl_usdhc4_1_100mhz: usdhc4grp-1-100mhz {
fsl,pins = <
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
>;
};
pinctrl_usdhc4_1_200mhz: usdhc4grp-1-200mhz {
fsl,pins = <
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
>;
};
};
};
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- linux 两次 connect()
- linux中那些不为人知的细节
- 嵌入式Linux开发教程：初始Ubuntu
- Linux学习笔记--共享文件夹
- linux daemon进程为什么要fork 2次？
- linux 权限掩码 umask
- Linux安装kafka 分布式
- linux 命令——28 tar
- Centos 6.6 安装ICE
- Linux基础与命令
- Linux流量监控工具 - iftop (最全面的iftop教程)
- linux 命令——27 chmod
- 一个迷茫的 大学生自学Linux的开始
- linux学习 命令ll后字段的解释(转)
- linux学习 命令ll后字段的解释(转)
- linux 字符集更改
- linux 命令——25 linux文件属性详解
- Linux文件系统
- linux 命令——24 Linux文件类型与扩展名
- gitlab 一键安装 centos 6.5