Windows上编译最新的CURL,含有zlib,openssl
2015-06-01 19:16
393 查看
最近,从网上下载了一个curl库,使用时各种报错,都无法启动,于是干脆就直接自己编译了。
1. 准备工作
a. 下载zlib
zlib可以使得HTTP请求支持gzip压缩,其地址如下:
官网:http://zlib.net/
下载地址:http://zlib.net/zlib-1.2.8.tar.gz
b. 下载openssl
opensll使用与支持SSL,例如HTTPS的请求。
官网:http://www.openssl.org
下载地址:http://www.openssl.org/source/openssl-1.0.1f.tar.gz
c. 下载curl
官网:http://curl.haxx.se
下载地址:在http://curl.haxx.se/download.html选择你所想要的版本,我这儿选用最新的7.35.0版本 [http://curl.haxx.se/download/curl-7.35.0.tar.gz]
d. 下载ActivePerl
官网:http://www.activestate.com/activeperl/downloads
请注意根据自己的系统版本【32,64】选择不同的安装包【链接失效时用迅雷可下载】
下载地址:http://downloads.activestate.com/ActivePerl/releases/5.16.0.1600/ActivePerl-5.16.0.1600-MSWin32-x86-295879.msi
X64下载地址:http://downloads.activestate.com/ActivePerl/releases/5.16.0.1600/ActivePerl-5.16.0.1600-MSWin32-x64-295879.msi
编译方法:
a. 安装activePerl
直接双击安装,用默认设置就可以了。
b. 解压所有的源码文件,全部放在一个目录下,比如我是房子c:\curl目录下,目录结构如下:
c. 编译zlib
从开始菜单,选择Microsoft Visual Studio 2005 > Visual Studio Tools > Visual Studio 2005 Command Prompt,如下图:
之后会弹出一个CMD窗口,切换到zlib的目录下C:\curl\zlibxxx,然后输入:
[plain] view
plaincopy
nmake -f win32/Makefile.msc OBJA="inffast.obj"
过了一会儿就编译成功。
2. 编译openssl
将当前目录切换到C:\curl\openssl-1.0.1f,如何输入下面执行下面的命令:
[plain] view
plaincopy
ms\32all.bat
然后就开始了漫长的编译,我这等了15分钟才编译好= =$
3. 编译curllib
将当前目录切换到curl的的目录下C:\curl\curl-7.35.0\lib,然后依次输入一下的命令:
[plain] view
plaincopy
set OPENSSL_PATH=..\..\openssl-1.0.1f
set ZLIB_PATH=..\..\zlib-1.2.8
nmake -f Makefile.vc8 CFG=release-dll-zlib-dll
注意 Makefile.vc6是VC6.0的版本,VC8是VC2005,VC9是VS2008,依次类推吧。
CFG是配置编译结果选项,其具体内容如下:
[plain] view
plaincopy
Usage: nmake /f makefile.vc6 CFG=<config> <target>
where <config> is one of:
release - release static library
release-ssl - release static library with ssl
release-zlib - release static library with zlib
release-ssl-zlib - release static library with ssl and zlib
release-ssl-ssh2-zlib - release static library with ssl, ssh2 and zlib
release-ssl-dll - release static library with dynamic ssl
release-zlib-dll - release static library with dynamic zlib
release-ssl-dll-zlib-dll - release static library with dynamic ssl and dynamic zlib
release-dll - release dynamic library
release-dll-ssl-dll - release dynamic library with dynamic ssl
release-dll-zlib-dll - release dynamic library with dynamic zlib
release-dll-ssl-dll-zlib-dll - release dynamic library with dynamic ssl and dynamic zlib
debug - debug static library
debug-ssl - debug static library with ssl
debug-zlib - debug static library with zlib
debug-ssl-zlib - debug static library with ssl and zlib
debug-ssl-ssh2-zlib - debug static library with ssl, ssh2 and zlib
debug-ssl-dll - debug static library with dynamic ssl
debug-zlib-dll - debug static library with dynamic zlib
debug-ssl-dll-zlib-dll - debug static library with dynamic ssl and dynamic zlib
debug-dll - debug dynamic library
debug-dll-ssl-dll - debug dynamic library with dynamic ssl
debug-dll-zlib-dll - debug dynamic library with dynamic zlib1
debug-dll-ssl-dll-zlib-dll - debug dynamic library with dynamic ssl and dynamic zlib
<target> can be left blank in which case all is assumed
Makefile.vc8(501) : fatal error U1050: please choose a valid configuration "rele
ase-dll-ssl-dll-zlib-dll "
Stop.
大家可以根据自己的需要编译不同的DLL和lib,我就选择编译了两个静态库:
[plain] view
plaincopy
nmake -f Makefile.vc8 CFG=release-ssl-zlib
nmake -f Makefile.vc8 CFG=debug-ssl-zlib
然后就是开始华丽丽的刷屏等待啦~~~
过了几分钟之后,就编译好了,将C:\curl\curl-7.35.0\lib\会有debug-ssl-zlib和release-ssl-zlib目录,拷贝到VS的工程目下,然后配置一下就可以使用了。
/article/8711554.html
1. 准备工作
a. 下载zlib
zlib可以使得HTTP请求支持gzip压缩,其地址如下:
官网:http://zlib.net/
下载地址:http://zlib.net/zlib-1.2.8.tar.gz
b. 下载openssl
opensll使用与支持SSL,例如HTTPS的请求。
官网:http://www.openssl.org
下载地址:http://www.openssl.org/source/openssl-1.0.1f.tar.gz
c. 下载curl
官网:http://curl.haxx.se
下载地址:在http://curl.haxx.se/download.html选择你所想要的版本,我这儿选用最新的7.35.0版本 [http://curl.haxx.se/download/curl-7.35.0.tar.gz]
d. 下载ActivePerl
官网:http://www.activestate.com/activeperl/downloads
请注意根据自己的系统版本【32,64】选择不同的安装包【链接失效时用迅雷可下载】
下载地址:http://downloads.activestate.com/ActivePerl/releases/5.16.0.1600/ActivePerl-5.16.0.1600-MSWin32-x86-295879.msi
X64下载地址:http://downloads.activestate.com/ActivePerl/releases/5.16.0.1600/ActivePerl-5.16.0.1600-MSWin32-x64-295879.msi
编译方法:
a. 安装activePerl
直接双击安装,用默认设置就可以了。
b. 解压所有的源码文件,全部放在一个目录下,比如我是房子c:\curl目录下,目录结构如下:
c. 编译zlib
从开始菜单,选择Microsoft Visual Studio 2005 > Visual Studio Tools > Visual Studio 2005 Command Prompt,如下图:
之后会弹出一个CMD窗口,切换到zlib的目录下C:\curl\zlibxxx,然后输入:
[plain] view
plaincopy
nmake -f win32/Makefile.msc OBJA="inffast.obj"
过了一会儿就编译成功。
2. 编译openssl
将当前目录切换到C:\curl\openssl-1.0.1f,如何输入下面执行下面的命令:
[plain] view
plaincopy
ms\32all.bat
然后就开始了漫长的编译,我这等了15分钟才编译好= =$
3. 编译curllib
将当前目录切换到curl的的目录下C:\curl\curl-7.35.0\lib,然后依次输入一下的命令:
[plain] view
plaincopy
set OPENSSL_PATH=..\..\openssl-1.0.1f
set ZLIB_PATH=..\..\zlib-1.2.8
nmake -f Makefile.vc8 CFG=release-dll-zlib-dll
注意 Makefile.vc6是VC6.0的版本,VC8是VC2005,VC9是VS2008,依次类推吧。
CFG是配置编译结果选项,其具体内容如下:
[plain] view
plaincopy
Usage: nmake /f makefile.vc6 CFG=<config> <target>
where <config> is one of:
release - release static library
release-ssl - release static library with ssl
release-zlib - release static library with zlib
release-ssl-zlib - release static library with ssl and zlib
release-ssl-ssh2-zlib - release static library with ssl, ssh2 and zlib
release-ssl-dll - release static library with dynamic ssl
release-zlib-dll - release static library with dynamic zlib
release-ssl-dll-zlib-dll - release static library with dynamic ssl and dynamic zlib
release-dll - release dynamic library
release-dll-ssl-dll - release dynamic library with dynamic ssl
release-dll-zlib-dll - release dynamic library with dynamic zlib
release-dll-ssl-dll-zlib-dll - release dynamic library with dynamic ssl and dynamic zlib
debug - debug static library
debug-ssl - debug static library with ssl
debug-zlib - debug static library with zlib
debug-ssl-zlib - debug static library with ssl and zlib
debug-ssl-ssh2-zlib - debug static library with ssl, ssh2 and zlib
debug-ssl-dll - debug static library with dynamic ssl
debug-zlib-dll - debug static library with dynamic zlib
debug-ssl-dll-zlib-dll - debug static library with dynamic ssl and dynamic zlib
debug-dll - debug dynamic library
debug-dll-ssl-dll - debug dynamic library with dynamic ssl
debug-dll-zlib-dll - debug dynamic library with dynamic zlib1
debug-dll-ssl-dll-zlib-dll - debug dynamic library with dynamic ssl and dynamic zlib
<target> can be left blank in which case all is assumed
Makefile.vc8(501) : fatal error U1050: please choose a valid configuration "rele
ase-dll-ssl-dll-zlib-dll "
Stop.
大家可以根据自己的需要编译不同的DLL和lib,我就选择编译了两个静态库:
[plain] view
plaincopy
nmake -f Makefile.vc8 CFG=release-ssl-zlib
nmake -f Makefile.vc8 CFG=debug-ssl-zlib
然后就是开始华丽丽的刷屏等待啦~~~
过了几分钟之后,就编译好了,将C:\curl\curl-7.35.0\lib\会有debug-ssl-zlib和release-ssl-zlib目录,拷贝到VS的工程目下,然后配置一下就可以使用了。
/article/8711554.html
相关文章推荐
- VS2013编译64位OpenSSL(附32位)
- 有用的Linux命令
- 12、opencv配置
- Linux系统编程——进程间通信:信号中断处理
- Docker生态系统系列之一:常用组件介绍
- Hadoop cluster security 1: How to enable HDFS permission ACl
- Shell脚本基本命令
- 【linux】Ubuntu上的防火墙iptables的基本配置与使用
- linux debain systemd 开机启动 nodejs 兼容原initd启动 forever 开机自启
- Docker使用Link在容器之间建立连接
- nginx+php使用open_basedir限制站点目录防止跨站
- docker常用命令
- tomcat 开启远程debug
- Linux内核编译、管理以及kickstart和引导镜像制作
- linux下 的文件解压
- Mac 系统 开启启动 nginx
- nginx日志切割,日志格式,静态文件不记录日志,配置缓存
- linux下使用scp在服务器之间拷贝文件
- ubuntu中安装Docker
- Linux 系统下文件信息的查询