手动释放linux内存cache
2015-04-15 11:40
423 查看
当在Linux下频繁存取文件后,物理内存会很快被用光,当程序结束后,内存不会被正常释放,而是一直作为caching。
为了提高磁盘存取效率,Linux做了一些精心的设计,除了对dentry目录进行缓存(用于VFS,加速文件路径名到inode的转换),还采取了两种主要Cache方式:Buffer Cache和Page Cache。前者针对磁盘块的读写,后者针对文件inode的读写。这些Cache有效缩短了 I/O系统调用(比如read,write,getdents)的时间。
那么有人说过段时间,linux会自动释放掉所用的内存,其实是没有自动释放得.
二、手动释放缓存
/proc是一个虚拟文件系统,我们可以通过对它的读写操作做为与Kernel实体间进行通信的一种手段。也就是说可以通过修改/proc中的文件,来对当前kernel的行为做出调整。那么我们可以通过调整/proc/sys/vm/drop_caches来释放内存。操作如下:
# cat /proc/sys/vm/drop_caches
0
首先,/proc/sys/vm/drop_caches的值,默认为0。
# sync
手动执行sync命令(描述:sync 命令运行 sync 子例程。如果必须停止系统,则运行sync 命令以确保文件系统的完整性。sync 命令将所有未写的系统缓冲区写到磁盘中,包含已修改的 i-Node、已延迟的块
I/O 和读写映射文件)
# echo 3 > /proc/sys/vm/drop_caches
# cat /proc/sys/vm/drop_caches
3
将/proc/sys/vm/drop_caches值设为3
# free -m
total used free shared buffers cached
Mem: 249 66 182 0 0 11
-/+ buffers/cache: 55 194
Swap: 511 0 511
再来运行free命令,会发现现在的used为66MB,free为182MB,buffers为0MB,cached为11MB。那么有效的释放了buffer和cache。
有关/proc/sys/vm/drop_caches的用法在下面进行了说明
/proc/sys/vm/drop_caches (since Linux 2.6.16)
Writing to this file causes the kernel to drop clean caches,dentries and inodes from memory, causing that memory to become free.
To free pagecache, use echo 1 > /proc/sys/vm/drop_caches;
to free dentries and inodes, use echo 2 > /proc/sys/vm/drop_caches;
to free pagecache, dentries and inodes, use echo 3 > /proc/sys/vm/drop_caches.
Because this is a non-destructive operation and dirty objects are not freeable, the user should run sync first.
为了提高磁盘存取效率,Linux做了一些精心的设计,除了对dentry目录进行缓存(用于VFS,加速文件路径名到inode的转换),还采取了两种主要Cache方式:Buffer Cache和Page Cache。前者针对磁盘块的读写,后者针对文件inode的读写。这些Cache有效缩短了 I/O系统调用(比如read,write,getdents)的时间。
那么有人说过段时间,linux会自动释放掉所用的内存,其实是没有自动释放得.
二、手动释放缓存
/proc是一个虚拟文件系统,我们可以通过对它的读写操作做为与Kernel实体间进行通信的一种手段。也就是说可以通过修改/proc中的文件,来对当前kernel的行为做出调整。那么我们可以通过调整/proc/sys/vm/drop_caches来释放内存。操作如下:
# cat /proc/sys/vm/drop_caches
0
首先,/proc/sys/vm/drop_caches的值,默认为0。
# sync
手动执行sync命令(描述:sync 命令运行 sync 子例程。如果必须停止系统,则运行sync 命令以确保文件系统的完整性。sync 命令将所有未写的系统缓冲区写到磁盘中,包含已修改的 i-Node、已延迟的块
I/O 和读写映射文件)
# echo 3 > /proc/sys/vm/drop_caches
# cat /proc/sys/vm/drop_caches
3
将/proc/sys/vm/drop_caches值设为3
# free -m
total used free shared buffers cached
Mem: 249 66 182 0 0 11
-/+ buffers/cache: 55 194
Swap: 511 0 511
再来运行free命令,会发现现在的used为66MB,free为182MB,buffers为0MB,cached为11MB。那么有效的释放了buffer和cache。
有关/proc/sys/vm/drop_caches的用法在下面进行了说明
/proc/sys/vm/drop_caches (since Linux 2.6.16)
Writing to this file causes the kernel to drop clean caches,dentries and inodes from memory, causing that memory to become free.
To free pagecache, use echo 1 > /proc/sys/vm/drop_caches;
to free dentries and inodes, use echo 2 > /proc/sys/vm/drop_caches;
to free pagecache, dentries and inodes, use echo 3 > /proc/sys/vm/drop_caches.
Because this is a non-destructive operation and dirty objects are not freeable, the user should run sync first.
相关文章推荐
- 【转载】手动释放linux内存cache
- 手动释放linux内存cache
- Linux内存(手动释放cache)
- 手动释放linux内存cache
- 手动释放linux内存cache
- 手动释放linux内存cache和脚本定时释放
- 手动释放linux内存cache和脚本定时释放
- 手动释放linux内存cache
- 手动释放linux内存cache和脚本定时释放
- 手动释放linux内存cache和脚本定时释放
- 手动释放linux内存cache和脚本定时释放
- 手动释放linux内存cache和脚本定时释放
- 手动释放linux内存cache和脚本定时释放
- Linux-手动释放linux内存cache
- 手动释放linux内存cache
- 手动释放linux内存cache和脚本定时释放
- 手动释放linux内存cache和脚本定时释放
- 手动释放linux内存cache和脚本定时释放
- 手动释放linux内存cache和脚本定时释放
- Linux内存机制以及手动释放swap和内存