centos 6.5 安装gitlab安装需注意的问题

按照官网进行操作，环境为centos 6.5
https://about.gitlab.com/downloads/
注意安装过程中执行命令

sudo gitlab-ctl reconfigure

出现错误，在/etc/gitlab/gitlab.rb 中修改域名后再执行一次方可启动成功



进页面提示502，用命令

sudo gitlab-ctl tail postgresql

查看提示内存不足，官方也是建议1g内存进行搭建，512m的话也可以安装但是要添加swap，不然启动后就会提示内存不足，我目前是512的，添加swap后访问成功，但是有点慢可能，还是升为1g了。

上图是我目前的配置，注意这里修改了gitlab默认的仓库存储路径，教程官网有
https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/README.md

Storing Git data in an alternative directory
我这里贴出来给大家看看
# Prevent users from writing to the repositories while you move them.
sudo gitlab-ctl stop
# Only move 'repositories'; 'gitlab-satellites' will be recreated
# automatically. Note there is _no_ slash behind 'repositories', but there _is_ a
# slash behind 'git-data'.
sudo rsync -av /var/opt/gitlab/git-data/repositories /mnt/nas/git-data/
# Fix permissions if necessary
sudo gitlab-ctl reconfigure
# Double-check directory layout in /mnt/nas/git-data. Expected output:
# gitlab-satellites repositories
sudo ls /mnt/nas/git-data/
# Done! Start GitLab and verify that you can browse through the repositories in
# the web interface.
sudo gitlab-ctl start

可以看到这是安装完成后gitlab一些文件和数据的路径
看到网上很多资料都不对，可能是过时了，所以搞gitlab建议大家还是以官网为主，说不定你在看我这个文章的时候也过时了

Omnibus-gitlab uses four different directories.

/opt/gitlab

holds application code for GitLab and its dependencies.

/var/opt/gitlab

holds application data and configuration
files that

gitlab-ctl reconfigure

writes to.

/etc/gitlab

holds configuration files for omnibus-gitlab.
These are the only files that you should ever have to edit manually.

/var/log/gitlab

contains all log data generated by components
of omnibus-gitlab.

有错误的时候尽量用
sudo gitlab-ctl tail
查看日志分析错误原因，我在配置邮件的时候也是试了很久才用上

接下来我们来配置邮件，我这里使用SMTP，用腾讯企业邮箱

还是修改/etc/gitlab/gitlab.rb 配置文件，再次提醒网上很多文章可以已经过时了
附上官网地址 https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/doc/settings/smtp.md

gitlab_rails['smtp_enable'] = true
gitlab_rails['smtp_address'] = "smtp.exmail.qq.com"
gitlab_rails['smtp_port'] = 25
gitlab_rails['smtp_user_name'] = "xx@xxx.com"
gitlab_rails['smtp_password'] = "password"
gitlab_rails['smtp_domain'] = "exmail.qq.com"
gitlab_rails['smtp_authentication'] = "login"
gitlab_rails['smtp_enable_starttls_auto'] = true
gitlab_rails['gitlab_email_from'] = 'xx@xxx.com'
##修改gitlab配置的发信人
user["git_user_email"] = "xx@xxx.com"

保持发信人和登录邮箱一致,我配置这里的时候也出错了，原因是我在看腾讯官网时候写的是用的SSL，端口是465
但是gitlab好像不是用的ssl，gitlab的教程里也没找到是否启用ssl的配置，我也没去深究了，于是把端口号改为25，邮件发送成功。
大家在测试邮件的时候可以用忘记密码来发送邮件测试，然后用gitlab-ctl tail来查看，大概等1分钟就能看到发送邮件的日志，出错了再具体分析原因