Ubuntu 14.04系统安装ThinkPad X201s指纹设备驱动
2014-10-21 23:41
253 查看
jiangym19860710.blog.163.com/blog/static/56153248201451565734784/
Reference: https://launchpad.net/~fingerprint/+archive/fingerprint-gui
Installation
=========
0. First of all, if you have installed Fingerprint GUI manually before, get rid of it completely. Remove all binaries, shared libraries, any other files and undo all the changes you have made to your system config files (especially to files under /etc/pam.d/).
1. Add this PPA to your sources:
sudo add-apt-repository ppa:fingerprint/fingerprint-gui
sudo apt-get update
2. Install the packages:
sudo apt-get install libbsapi policykit-1-fingerprint-gui fingerprint-gui
3. Log out of your session and log back in (we need the new session defaults to be picked up).
Setup
=====
After installation launch “Fingerprint GUI” and enrol your fingerprints.
That should be all you need to do!
Try locking your screen, logging out and in, sudo in terminal and running graphical apps requiring root privileges.
Uninstallation
===========
GNOME users: The package policykit-1-fingerprint-gui replaces GNOME's standard PolicyKit daemon (contained in package policykit-1-gnome). However, when you decide to uninstall Fingerprint GUI (and hence remove policykit-1-fingerprint-gui), policykit-1-gnome
will not get automatically installed back, hence there won't be any PolicyKit daemon in the system, and APT will try to remove all the packages that depend on it. Therefore, if you want to remove Fingerprint GUI, make sure you install policykit-1-gnome back
first.
sudo apt-get install policykit-1-gnome
sudo apt-get remove fingerprint-gui
KDE SC users: The above instructions for GNOME users apply to you as well, just replace “policykit-1-gnome” by “polkit-kde-1” throughout the text.
Note for KDE SC users
==================
Please note that Fingerprint GUI doesn't work with kdm and kscreensaver because of a bug in these applications (see https://bugs.kde.org/show_bug.cgi?id=105631).
Note for Lubuntu users
==================
lxdm does not properly support alternative authentication methods in the PAM stack. If you want to use fingerprint-gui with Lubuntu, you should install lightdm and lightdm-gtk-greeter.
Troubleshooting
=============
If something doesn't work as you expect, you can try one of the following steps:
? In terminal run "sudo pam-auth-update". Make sure that the PAM profile called “Fingerprint authentication by Fingerprint GUI” is on top of the list and active. Otherwise, you may try resetting your PAM to system defaults with "sudo pam-auth-update --force".
? Check /var/log/auth.log for any clues. Fingerprint GUI is set up to run in debugging mode by default.
安装完成后 打开程序 按提示操作即可。
Reference: https://launchpad.net/~fingerprint/+archive/fingerprint-gui
Installation
=========
0. First of all, if you have installed Fingerprint GUI manually before, get rid of it completely. Remove all binaries, shared libraries, any other files and undo all the changes you have made to your system config files (especially to files under /etc/pam.d/).
1. Add this PPA to your sources:
sudo add-apt-repository ppa:fingerprint/fingerprint-gui
sudo apt-get update
2. Install the packages:
sudo apt-get install libbsapi policykit-1-fingerprint-gui fingerprint-gui
3. Log out of your session and log back in (we need the new session defaults to be picked up).
Setup
=====
After installation launch “Fingerprint GUI” and enrol your fingerprints.
That should be all you need to do!
Try locking your screen, logging out and in, sudo in terminal and running graphical apps requiring root privileges.
Uninstallation
===========
GNOME users: The package policykit-1-fingerprint-gui replaces GNOME's standard PolicyKit daemon (contained in package policykit-1-gnome). However, when you decide to uninstall Fingerprint GUI (and hence remove policykit-1-fingerprint-gui), policykit-1-gnome
will not get automatically installed back, hence there won't be any PolicyKit daemon in the system, and APT will try to remove all the packages that depend on it. Therefore, if you want to remove Fingerprint GUI, make sure you install policykit-1-gnome back
first.
sudo apt-get install policykit-1-gnome
sudo apt-get remove fingerprint-gui
KDE SC users: The above instructions for GNOME users apply to you as well, just replace “policykit-1-gnome” by “polkit-kde-1” throughout the text.
Note for KDE SC users
==================
Please note that Fingerprint GUI doesn't work with kdm and kscreensaver because of a bug in these applications (see https://bugs.kde.org/show_bug.cgi?id=105631).
Note for Lubuntu users
==================
lxdm does not properly support alternative authentication methods in the PAM stack. If you want to use fingerprint-gui with Lubuntu, you should install lightdm and lightdm-gtk-greeter.
Troubleshooting
=============
If something doesn't work as you expect, you can try one of the following steps:
? In terminal run "sudo pam-auth-update". Make sure that the PAM profile called “Fingerprint authentication by Fingerprint GUI” is on top of the list and active. Otherwise, you may try resetting your PAM to system defaults with "sudo pam-auth-update --force".
? Check /var/log/auth.log for any clues. Fingerprint GUI is set up to run in debugging mode by default.
安装完成后 打开程序 按提示操作即可。
相关文章推荐
- thinkpad X240 安装Ubuntu14.04 系统并搭建android开发环境
- ThinkPad X230安装Ubuntu实现双系统的优雅方案
- Ubuntu 14.04 U盘安装方法——最简易的双系统安装方法
- Ubuntu14.04 和 Windows7 双系统安装
- mac系统下虚拟机parallels安装ubuntu 14.04
- ubuntu server 14.04 LTS下搭建LAMP环境之最详细笔记之一U盘安装双系统
- Ubuntu 14.04 Linux系统安装Subversion结合Eclipse的一些问题
- Thinkpad E420 安装ubuntu 等linux系统无线网卡问题
- ThinkPad E431/E531 ubuntu 14.04 安装无线网卡驱动
- 教程:Ubuntu 14.04 和 Windows 8.1 双系统安装步骤
- mac系统下虚拟机parallels安装ubuntu 14.04
- 美化多系统启动选择菜单burg:在deepin 2013&& ubuntu14.04 上安装测试过,完全可用。
- 在win7之后安装Ubuntu14.04系统后,丢失对win7的引导
- U盘安装双系统win7+Ubuntu14.04,Ubuntu引导启动
- thinkpad e40 ubuntu系统安装支持无线网卡的历程
- Ubuntu 14.04 系统下安装 SteamOS 会话的方法
- win7硬盘安装Ubuntu 14.04、Win7和Ubuntu双系统时卸载Ubuntu
- Windows 7 & Ubuntu 14.04完美双系统安装及系统引导配置----校园网Mentohust配置
- thinkpad T430s 在win8上安装ubuntu双系统(UEFI开启)
- ubuntu 14.04 安装google earth 64位系统