PowerDesigner中翻转生成PDM图时把Name属性变成注释(转)
2014-09-16 15:19
676 查看
在pd里面运行下面这段代码
'******************************************************************************
'* File: name2comment.vbs
'* Purpose: Database generation cannot use object names anymore
' in version 7 and above.
' It always uses the object codes.
'
' In case the object codes are not aligned with your
' object names in your model, this script will copy
' the object Name onto the object comment for
' the Tables and Columns.
'
'* Title: 把对象name拷入comment属性中
'* Version: 1.0
'* 执行方法:PD11 -- Open PDM -- Tools -- Execute Commands -- Run Script
'******************************************************************************
Option Explicit
ValidationMode = True
InteractiveMode = im_Batch
Dim mdl ' the current model
' get the current active model
Set mdl = ActiveModel
If (mdl Is Nothing) Then
MsgBox "There is no current Model"
ElseIf Not mdl.IsKindOf(PdPDM.cls_Model) Then
MsgBox "The current model is not an Physical Data model."
Else
ProcessFolder mdl
End If
' This routine copy name into code for each table, each column and each view
' of the current folder
Private sub ProcessFolder(folder)
Dim Tab 'running table
for each Tab in folder.tables
if not tab.isShortcut then
if tab.comment ="" then
else
tab.name=tab.name+"("+tab.comment+")"
on error resume next
end if
Dim col ' running column
for each col in tab.columns
if col.comment="" then
' MsgBox "表"+tab.name+"列"+col.name +"没有comment"
else
col.name=col.name+"("+col.comment+")"
on error resume next
end if
next
end if
next
Dim view 'running view
for each view in folder.Views
if not view.isShortcut then
if view.comment="" then
MsgBox "视图"+view.name +"没有comment"
else
view.name=view.name+"("+view.comment+")"
on error resume next
end if
end if
next
' go into the sub-packages
Dim f ' running folder
For Each f In folder.Packages
if not f.IsShortcut then
ProcessFolder f
end if
Next
end sub
'******************************************************************************
'* File: name2comment.vbs
'* Purpose: Database generation cannot use object names anymore
' in version 7 and above.
' It always uses the object codes.
'
' In case the object codes are not aligned with your
' object names in your model, this script will copy
' the object Name onto the object comment for
' the Tables and Columns.
'
'* Title: 把对象name拷入comment属性中
'* Version: 1.0
'* 执行方法:PD11 -- Open PDM -- Tools -- Execute Commands -- Run Script
'******************************************************************************
Option Explicit
ValidationMode = True
InteractiveMode = im_Batch
Dim mdl ' the current model
' get the current active model
Set mdl = ActiveModel
If (mdl Is Nothing) Then
MsgBox "There is no current Model"
ElseIf Not mdl.IsKindOf(PdPDM.cls_Model) Then
MsgBox "The current model is not an Physical Data model."
Else
ProcessFolder mdl
End If
' This routine copy name into code for each table, each column and each view
' of the current folder
Private sub ProcessFolder(folder)
Dim Tab 'running table
for each Tab in folder.tables
if not tab.isShortcut then
if tab.comment ="" then
else
tab.name=tab.name+"("+tab.comment+")"
on error resume next
end if
Dim col ' running column
for each col in tab.columns
if col.comment="" then
' MsgBox "表"+tab.name+"列"+col.name +"没有comment"
else
col.name=col.name+"("+col.comment+")"
on error resume next
end if
next
end if
next
Dim view 'running view
for each view in folder.Views
if not view.isShortcut then
if view.comment="" then
MsgBox "视图"+view.name +"没有comment"
else
view.name=view.name+"("+view.comment+")"
on error resume next
end if
end if
next
' go into the sub-packages
Dim f ' running folder
For Each f In folder.Packages
if not f.IsShortcut then
ProcessFolder f
end if
Next
end sub
相关文章推荐
- PowerDesigner反向生成PDM和name与注释互换
- 从PowerDesigner表字段的Name到EF实体类属性的Display Name(根据PowerDesigner生成EF实体类中文注释和验证元数据)
- PowerDesigner反向生成PDM和name与注释互换
- 【摘要】PowerDesigner 根据NAME属性自动生成表和列注释
- powerdesigner逆向工程生成PDM时的列注释解决方案
- PowerDesigner根据NAME自动生成注释
- powerdesigner逆向工程生成PDM时的列注释(ColumnComment)解决方案
- powerdesigner逆向工程生成PDM时的列注释解决方案
- powerdesigner中将表的name在生成建表sql时生成注释
- powerdesigner中将表的name在生成建表sql时生成注释
- PowerDesigner 的mysql PDM 的COMMENT注释改为name+comment
- powerdesigner 生成mysql PDM 的COMMENT注释
- powerdesigner 生成脚本时 名字总是中文的解决办法 属性是name 不是code
- Powerdesigner16.5将物理模型表中的name在创建数据库时生成对应字段的注释
- PowerDesigner 中 根据对象的name和comment 生成注释的办法
- powerdesigner逆向工程生成PDM时的列注释解决方案
- 将PowerDesigner中列的name生成到注释comment中去.vbs
- PowerDesigner 12.5 开启注释列 将Comment(注释)及Name(名称)内容互相COPY的VBS代码 根据名称生成注释(完整示例)
- 决绝powerdesigner逆向工程生成PDM时,列注释解决方案
- powerdesigner中将表的name在生成建表sql时生成注释