不重新启动Linux,手工识别在线新增磁盘方法

下文简单介绍一个方法,实现不重新启动linux而可以识别到新增的磁盘.

环境描述:

OS: Redhat linux 5.4 x86(主机为vmware 虚拟主机)

增加一个50G的lun

一. 手工增加磁盘的命令

# echo "scsi add-single-device w x y z" > /proc/scsi/scsi

为使该命令正常运行，必须指定正确的参数值 w、x、y 和 z，如下所示： 

w 是主机适配器标识，第一个适配器为零(0)

x 是主机适配器上的 SCSI 通道，第一个通道为零(0)

y 是设备的 SCSI 标识

z 是 LUN 号，第一个 LUN 为零(0)

二. 执行命令前,检查/proc/scsi/scsi文件,确定新磁盘的id

Attached devices:

Host: scsi0 Channel: 00 Id: 00 Lun: 00

Vendor: VMware Model: Virtual disk Rev: 1.0 

Type: Direct-Access ANSI SCSI revision: 02

Host: scsi0 Channel: 00 Id: 01 Lun: 00

Vendor: VMware Model: Virtual disk Rev: 1.0 

Type: Direct-Access ANSI SCSI revision: 02

Host: scsi0 Channel: 00 Id: 02 Lun: 00

Vendor: VMware Model: Virtual disk Rev: 1.0 

Type: Direct-Access ANSI SCSI revision: 02

Host: scsi0 Channel: 00 Id: 03 Lun: 00

Vendor: VMware Model: Virtual disk Rev: 1.0 

Type: Direct-Access ANSI SCSI revision: 02

Host: scsi0 Channel: 00 Id: 04 Lun: 00

Vendor: VMware Model: Virtual disk Rev: 1.0 

Type: Direct-Access ANSI SCSI revision: 02

可以看到最大的id号为04,新增磁盘的ID应该确定为5.

三. 执行fdisk -l命令,检查当前磁盘的情况

[root@soadb scsi]# fdisk -l

Disk /dev/sda: 21.4 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sda1 * 1 13 104391 83 Linux

/dev/sda2 14 2610 20860402+ 8e Linux LVM

......

Disk /dev/sde: 53.6 GB, 53687091200 bytes

255 heads, 63 sectors/track, 6527 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sde doesn't contain a valid partition table

四. 执行命令

#echo "scsi add-single-device 0 0 5 0" >/proc/scsi/scsi

五. 执行fdisk命令,检查结果

[root@soadb scsi]# fdisk -l

......

Disk /dev/sde: 53.6 GB, 53687091200 bytes

255 heads, 63 sectors/track, 6527 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sde doesn't contain a valid partition table

Disk /dev/sdf: 53.6 GB, 53687091200 bytes

255 heads, 63 sectors/track, 6527 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdf doesn't contain a valid partition table

可以看到,新增的50G的磁盘已经在操作系统中识别到,设备名称为/dev/sdf.

此时就可以使用这个设备了.