ubuntu 配置nfs服务器
2014-07-14 20:09
423 查看
Network File System (NFS)
NFS allows a system to share directories and files with others over a network. By using NFS, users and programs can access files on remote systems almost as if they were local files.Some of the most notable benefits that NFS can provide are:
Local workstations use less disk space because commonly used data can be stored on a single machine and still remain accessible to others over the network.
There is no need for users to have separate home directories on every network machine. Home directories could be set up on the NFS server and made available throughout the network.
Storage devices such as floppy disks, CDROM drives, and USB Thumb drives can be used by other machines on the network. This may reduce the number of removable media drives throughout the network.
Installation
At a terminal prompt enter the following command to install the NFS Server:sudo apt-get install nfs-kernel-server
Configuration
You can configure the directories to be exported by adding them to the /etc/exportsfile. For example:
/ubuntu *(ro,sync,no_root_squash) /home *(rw,sync,no_root_squash)
You can replace * with one of the hostname formats. Make the hostname declaration as specific as possible so unwanted systems cannot access the NFS mount.
To start the NFS server, you can run the following command at a terminal prompt:
sudo /etc/init.d/nfs-kernel-server start
NFS Client Configuration
Use the mount command to mount a shared NFS directory from another machine, by typing a command line similar to the following at a terminal prompt:sudo mount example.hostname.com:/ubuntu /local/ubuntu
The mount point directory /local/ubuntumust exist. There should be no files or subdirectories in the /local/ubuntudirectory. |
/etc/fstabfile. The line must state the hostname of the NFS server, the directory on the server being exported, and the directory on the local
machine where the NFS share is to be mounted.
The general syntax for the line in
/etc/fstabfile is as follows:
example.hostname.com:/ubuntu /local/ubuntu nfs rsize=8192,wsize=8192,timeo=14,intr
If you have trouble mounting an NFS share, make sure the nfs-common package is installed on your client. To install nfs-common enter the following command
at the terminal prompt:
sudo apt-get install nfs-common
References
Linux NFS faqUbuntu Wiki NFS Howto
相关文章推荐
- Ubuntu NFS服务器的配置
- Ubuntu 下nfs服务器的配置及mini2440的挂载
- Ubuntu NFS服务器的配置
- NFS服务器安装配置实现Ubuntu 12.04与ARM开发板文件共享
- Ubuntu14.04下配置nfs服务器方法和步骤
- Ubuntu配置网络文件共享服务器NFS
- Ubuntu10.04安装与配置nfs服务器(转载)
- NFS服务器安装配置实现Ubuntu 12.04与ARM文件共享
- ubuntu 11.10 nfs 服务器配置
- Ubuntu下NFS服务器配置
- ubuntu 下配置nfs服务器
- Ubuntu配置NFS服务器
- ubuntu下配置nfs服务器
- ubuntu nfs服务器配置
- ubuntu 8.10配置NFS服务器
- Ubuntu NFS服务器的配置(绿色为自己添加)
- ubuntu下NFS服务器的配置
- Ubuntu下配置NFS服务器
- NFS服务器安装配置实现Ubuntu 12.04与ARM文件共享
- ubuntu nfs服务器配置