kvm-虚拟机增加硬盘空间
2014-06-05 20:42
351 查看
kvm虚拟化模式下,给虚拟机增加硬盘空间概念上有3种办法;首先执行指令:virsh resize VR.img +2G
其中方法一,可参考http://geekpeek.net/resize-filesystem-fdisk-resize2fs/,及动态扩充非lvm磁盘空间,此处不可行的原因在于扩充需要卸载挂载点,而根节点或者boot节点不可卸载,否则会出问题;
方法一:fdisk模式下直接将新增磁盘空间给予/,及根挂载点;
方法二:fdisk模式下,将新增磁盘空间成为一个新的分区,如/dev/sda3,然后mkfs -t ext4 /dev/sda3,然后挂载到某一目录;
方法三:将新增磁盘空间成为一个新的磁盘;具体方法参照http://blog.fens.me/vps-kvm-disk/;概括如下:
如何给计算机增加物理硬盘并分区,请参考:多硬盘分区管理fdisk 文章
查看HOST机的硬盘
下面将进行两个测试:
通过virsh给guest增加文件硬盘:通过文件硬盘的镜像/disk/sdb6/c1d6.img
通过virsh给guest增加分区硬盘:直接使用分区硬盘/dev/sdb5
通过virsh管理工具加载硬盘
重启c1虚拟机
在c1中,进行硬盘查检并分区
/dev/vdb已经被识别,接下来 分区,格式化,挂载,使用
硬盘分区
格式化
挂载
使用
/home/cos/hadoopb的目录,已经挂载到了/dev/vdb1上面,我可以在hadoopb下载做任何的操作。
登陆虚拟c1,查看硬盘信息
已经被正确识别
Disk /dev/vdc: 161.1 GB, 161061274112 bytes
接下来,可以参考上面类似的过程,分区,格式化,挂载,使用。
现将http://geekpeek.net/resize-filesystem-fdisk-resize2fs/方法复制如下:
There was a question in my post on “Linux partitioning with fdisk on CentOS 6“. Our reader asked
if it is possible to extend an existing linux non LVM partition without loosing it’s data …
here is a post on how to resizepartition and filesystem with
fdisk and resize2fs.
IMPORTANT: In order to resize partition (extend), enough disk space must be available! We can not extend a partition if there are no free
sectors/cylinders at the end of the partition to extend!
PLEASE BACKUP YOUR DATA BEFORE RESIZING ANY PARTITION! GeekPeek.Net is not responsible for any data loss!
Resize Partition and Filesystem with fdisk and resize2fs
/dev/sda – 16GB system disk with LVM partitions (root and swap)
/dev/sdb – 1GB clean disk for tutorial purpose
For the start of this tutorial tutorial we have created one partition on /dev/sdb disk.Partition size (/dev/sdb1) is 500MB. We created an ext4
filesystem on this partition and put some dummy data on it. We will be modifying our partitions with fdisk and filesystem with resize2fs.
For more information on how to create and modify partitions with fdisk read “Linux partitioning with
fdisk on CentOS 6“.
Before we start, let’s check the current disk configuration. Geekpeek mount point is the partition we want to extend. We can see that the partition has 494MB of available space and 401MB is already used by dummy data. We want to extend the partition to 1GB:
We are able to mount the partition at this point, but the filesystem on this partition is only 500MB large. We need to resize the filesystem using resize2fs command in the following steps.
Voila! The partition was successfully extended, as we can see all of the data survived!
Always
remember to resize the filesystem with resize2fs.
Reviewing the current disk configuration: Geekpeek mount point is the partition we want to reduce. We can see that the partition has 988MB of available space and 324MB is used by dummy data. We want to reduce the partition to 400MB without loosing data:
Voila! The partition was successfully reduced to 400MB, as we can see all of the data survived!
Always
remember to resize the filesystem with resize2fs.
其中方法一,可参考http://geekpeek.net/resize-filesystem-fdisk-resize2fs/,及动态扩充非lvm磁盘空间,此处不可行的原因在于扩充需要卸载挂载点,而根节点或者boot节点不可卸载,否则会出问题;
方法一:fdisk模式下直接将新增磁盘空间给予/,及根挂载点;
方法二:fdisk模式下,将新增磁盘空间成为一个新的分区,如/dev/sda3,然后mkfs -t ext4 /dev/sda3,然后挂载到某一目录;
方法三:将新增磁盘空间成为一个新的磁盘;具体方法参照http://blog.fens.me/vps-kvm-disk/;概括如下:
1. host增加物理硬盘并分区
HOST作为KVM的宿主计算机,管理所有GUEST虚拟机。我们通过给HOST增加物理硬盘,然后分给GUEST,从而实现给虚拟机硬盘扩容的效果。如何给计算机增加物理硬盘并分区,请参考:多硬盘分区管理fdisk 文章
查看HOST机的硬盘
~ sudo fdisk -l Disk /dev/sda: 299.4 GB, 299439751168 bytes 255 heads, 63 sectors/track, 36404 cylinders, total 584843264 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000efd7c Device Boot Start End Blocks Id System /dev/sda1 2048 97656831 48827392 82 Linux swap / Solaris /dev/sda2 97656832 136718335 19530752 83 Linux /dev/sda3 136718336 214843335 39062500 83 Linux /dev/sda4 * 214843392 215037951 97280 83 Linux Disk /dev/sdb: 1999.3 GB, 1999307276288 bytes 255 heads, 63 sectors/track, 243068 cylinders, total 3904897024 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf919a976 Device Boot Start End Blocks Id System /dev/sdb1 2048 1952448511 976223232 7 HPFS/NTFS/exFAT /dev/sdb2 1952448512 3904897023 976224256 5 Extended /dev/sdb5 1952450560 2267023360 157286400+ 83 Linux /dev/sdb6 2267025409 2581596160 157285376 83 Linux /dev/sdb7 2581598209 2896168960 157285376 83 Linux /dev/sdb8 2896171009 3210741760 157285376 83 Linux /dev/sdb9 3210743809 3525314560 157285376 83 Linux /dev/sdb10 3525316609 3904897023 189790207+ 83 Linux ~ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 37G 3.4G 32G 10% / udev 24G 4.0K 24G 1% /dev tmpfs 9.5G 1.1M 9.5G 1% /run none 5.0M 8.0K 5.0M 1% /run/lock none 24G 152K 24G 1% /run/shm none 100M 28K 100M 1% /run/user cgroup 24G 0 24G 0% /sys/fs/cgroup /dev/sda2 19G 3.6G 14G 21% /home /dev/sda4 92M 34M 54M 39% /boot /dev/sdb1 931G 100G 832G 11% /disk/sdb1 /dev/sdb6 148G 188M 140G 1% /disk/sdb6
下面将进行两个测试:
通过virsh给guest增加文件硬盘:通过文件硬盘的镜像/disk/sdb6/c1d6.img
通过virsh给guest增加分区硬盘:直接使用分区硬盘/dev/sdb5
2. 通过virsh给guest增加文件硬盘
创建文件硬盘的镜像~ cd /disk/sdb6/ ~ sudo qemu-img create -f raw /disk/sdb6/c1d6.img 10G Formatting '/disk/sdb6/c1d6.img', fmt=raw size=10737418240 ~ ls -l -rw-r--r-- 1 root root 10737418240 Jul 8 16:37 c1d6.img drwx------ 2 root root 16384 Jul 8 09:03 lost+found/
通过virsh管理工具加载硬盘
~ sudo virsh Welcome to virsh, the virtualization interactive terminal. Type: 'help' for help with commands 'quit' to quit #查看系统内的虚拟机 virsh # list Id Name State ---------------------------------------------------- 5 server3 running 6 server4 running 7 d2 running 8 r1 running 9 server2 running 12 c1 running #在这里我们要对c1进行硬盘扩容 virsh # edit c1 #找到硬盘配置(原来的系统硬盘) <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/disk/sdb1/c1.img'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> #增加文件硬盘,vdb <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/disk/sdb6/c1d6.img'/> <target dev='vdb' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </disk> #保存退出
重启c1虚拟机
#请使用destroy命令,reboot和shutdown不管用。 ~ virsh # destroy c1 Domain c1 destroyed #list找不到c1 ~ virsh # list Id Name State ---------------------------------------------------- 5 server3 running 6 server4 running 7 d2 running 8 r1 running 9 server2 running #启动虚拟机c1 ~ virsh # start c1 Domain c1 started #进入虚拟机c1 ~ console c1
在c1中,进行硬盘查检并分区
~ sudo fdisk -l Disk /dev/vda: 42.9 GB, 42949672960 bytes 16 heads, 63 sectors/track, 83220 cylinders, total 83886080 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000516aa Device Boot Start End Blocks Id System /dev/vda1 * 2048 499711 248832 83 Linux /dev/vda2 501758 83884031 41691137 5 Extended /dev/vda5 501760 83884031 41691136 8e Linux LVM Disk /dev/vdb: 10.7 GB, 10737418240 bytes 16 heads, 63 sectors/track, 20805 cylinders, total 20971520 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/vdb doesn't contain a valid partition table Disk /dev/mapper/u1210-root: 38.4 GB, 38394658816 bytes 255 heads, 63 sectors/track, 4667 cylinders, total 74989568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/u1210-root doesn't contain a valid partition table Disk /dev/mapper/u1210-swap_1: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/u1210-swap_1 doesn't contain a valid partition table
/dev/vdb已经被识别,接下来 分区,格式化,挂载,使用
硬盘分区
~ sudo fdisk /dev/vdb Command (m for help): p Disk /dev/vdb: 161.1 GB, 161061274112 bytes 16 heads, 63 sectors/track, 312076 cylinders, total 314572801 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3b49c6a0 Device Boot Start End Blocks Id System Command (m for help): n Partition type: p primary (0 primary, 0 extended, 4 free) e extended Select (default p): p Partition number (1-4, default 1): Using default value 1 First sector (2048-314572800, default 2048): Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-314572800, default 314572800): Using default value 314572800 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. #分区生效 ~ sudo partprobe ~ sudo fdisk -l Disk /dev/vdb: 10.7 GB, 10737418240 bytes 2 heads, 17 sectors/track, 616809 cylinders, total 20971520 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf0432cd6 Device Boot Start End Blocks Id System /dev/vdb1 2048 20971519 10484736 83 Linux
格式化
~ sudo mkfs -t ext4 /dev/vdb1 mke2fs 1.42.5 (29-Jul-2012) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 9830400 inodes, 39321344 blocks 1966067 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 1200 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872 Allocating group tables: done Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done
挂载
~ sudo mount /dev/vdb1 /home/cos/hadoopb ~ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/u1210-root 36G 1.1G 33G 4% / udev 2.0G 4.0K 2.0G 1% /dev tmpfs 791M 232K 791M 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.0G 0 2.0G 0% /run/shm none 100M 0 100M 0% /run/user /dev/vda1 228M 29M 188M 14% /boot /dev/vdb1 9.9G 151M 9.2G 2% /home/cos/hadoopb
使用
/home/cos/hadoopb的目录,已经挂载到了/dev/vdb1上面,我可以在hadoopb下载做任何的操作。
3. 通过virsh给guest增加分区硬盘
直接使用HOST的分区硬盘/dev/sdb5,做个虚拟机c1的分区virsh # edit c1 #新增新硬盘vbc <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source dev='/dev/sdb5'/> <target dev='vbc' bus='virtio'/> </disk> virsh # destroy c1 Domain c1 destroyed virsh # start c1 Domain c1 started virsh # console c1
登陆虚拟c1,查看硬盘信息
sudo fdisk -l [sudo] password for cos: Disk /dev/vda: 42.9 GB, 42949672960 bytes 16 heads, 63 sectors/track, 83220 cylinders, total 83886080 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000516aa Device Boot Start End Blocks Id System /dev/vda1 * 2048 499711 248832 83 Linux /dev/vda2 501758 83884031 41691137 5 Extended /dev/vda5 501760 83884031 41691136 8e Linux LVM Disk /dev/vdb: 10.7 GB, 10737418240 bytes 2 heads, 17 sectors/track, 616809 cylinders, total 20971520 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf0432cd6 Device Boot Start End Blocks Id System /dev/vdb1 2048 20971519 10484736 83 Linux Disk /dev/vdc: 161.1 GB, 161061274112 bytes 4 heads, 4 sectors/track, 19660800 cylinders, total 314572801 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3b49c6a0 Device Boot Start End Blocks Id System /dev/vdc1 2048 314572800 157285376+ 83 Linux Disk /dev/mapper/u1210-root: 38.4 GB, 38394658816 bytes 255 heads, 63 sectors/track, 4667 cylinders, total 74989568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/u1210-root doesn't contain a valid partition table Disk /dev/mapper/u1210-swap_1: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/u1210-swap_1 doesn't contain a valid partition table
已经被正确识别
Disk /dev/vdc: 161.1 GB, 161061274112 bytes
接下来,可以参考上面类似的过程,分区,格式化,挂载,使用。
现将http://geekpeek.net/resize-filesystem-fdisk-resize2fs/方法复制如下:
There was a question in my post on “Linux partitioning with fdisk on CentOS 6“. Our reader asked
if it is possible to extend an existing linux non LVM partition without loosing it’s data …
here is a post on how to resizepartition and filesystem with
fdisk and resize2fs.
IMPORTANT: In order to resize partition (extend), enough disk space must be available! We can not extend a partition if there are no free
sectors/cylinders at the end of the partition to extend!
PLEASE BACKUP YOUR DATA BEFORE RESIZING ANY PARTITION! GeekPeek.Net is not responsible for any data loss!
Resize Partition and Filesystem with fdisk and resize2fs
Let’s Resize Partition and Filesystem with fdisk and resize2fs!
Our system has two disks:
/dev/sda – 16GB system disk with LVM partitions (root and swap)/dev/sdb – 1GB clean disk for tutorial purpose
For the start of this tutorial tutorial we have created one partition on /dev/sdb disk.Partition size (/dev/sdb1) is 500MB. We created an ext4
filesystem on this partition and put some dummy data on it. We will be modifying our partitions with fdisk and filesystem with resize2fs.
For more information on how to create and modify partitions with fdisk read “Linux partitioning with
fdisk on CentOS 6“.
Extend Partition and Filesystem
Before we start, let’s check the current disk configuration. Geekpeek mount point is the partition we want to extend. We can see that the partition has 494MB of available space and 401MB is already used by dummy data. We want to extend the partition to 1GB:[root@foo1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_foo-LogVol01 13G 4.6G 7.7G 38% / tmpfs 376M 0 376M 0% /dev/shm /dev/sda1 485M 105M 355M 23% /boot /dev/sdb1 494M 402M 67M 86% /geekpeek
1. Unmount the partition
[root@foo1 ~]# umount /geekpeek/ [root@foo1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_foo-LogVol01 13G 4.6G 7.7G 38% / tmpfs 376M 0 376M 0% /dev/shm /dev/sda1 485M 105M 355M 23% /boot
2. Delete the partition
[root@foo1 ~]# fdisk /dev/sdb WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): d Selected partition 1 Command (m for help): p Disk /dev/sdb: 1073 MB, 1073741824 bytes 255 heads, 63 sectors/track, 130 cylinders, total 2097152 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2dbb9f13 Device Boot Start End Blocks Id System Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
3. Create a new (larger) partition
[root@foo1 ~]# fdisk /dev/sdb WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First sector (2048-2097151, default 2048): Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-2097151, default 2097151): Using default value 2097151 Command (m for help): p Disk /dev/sdb: 1073 MB, 1073741824 bytes 255 heads, 63 sectors/track, 130 cylinders, total 2097152 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2dbb9f13 Device Boot Start End Blocks Id System /dev/sdb1 2048 2097151 1047552 83 Linux Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table.
We are able to mount the partition at this point, but the filesystem on this partition is only 500MB large. We need to resize the filesystem using resize2fs command in the following steps.
4. Run fsck on your filesystem
[root@foo1 ~]# e2fsck -f /dev/sdb1 e2fsck 1.41.12 (17-May-2010) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/sdb1: 16/130560 files (0.0% non-contiguous), 426988/522080 blocks
5. Resize your filesystem with resize2fs
[root@foo1 ~]# resize2fs /dev/sdb1 resize2fs 1.41.12 (17-May-2010) Resizing the filesystem on /dev/sdb1 to 1044192 (1k) blocks. The filesystem on /dev/sdb1 is now 1044192 blocks long.
6. Re-mount extended partition
[root@foo1 ~]# mount /dev/sdb1 /geekpeek/ [root@foo1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_foo-LogVol01 13G 4.6G 7.7G 38% / tmpfs 376M 0 376M 0% /dev/shm /dev/sda1 485M 105M 355M 23% /boot /dev/sdb1 988M 402M 536M 43% /geekpeek
Voila! The partition was successfully extended, as we can see all of the data survived!
Always
remember to resize the filesystem with resize2fs.
Reduce a Partition and Filesystem
Reviewing the current disk configuration: Geekpeek mount point is the partition we want to reduce. We can see that the partition has 988MB of available space and 324MB is used by dummy data. We want to reduce the partition to 400MB without loosing data:[root@foo1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_foo-LogVol01 13G 4.6G 7.7G 38% / tmpfs 376M 0 376M 0% /dev/shm /dev/sda1 485M 105M 355M 23% /boot /dev/sdb1 988M 324M 614M 35% /geekpeek
1. Unmount the partition
[root@foo1 ~]# umount /geekpeek/ [root@foo1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_foo-LogVol01 13G 4.6G 7.7G 38% / tmpfs 376M 0 376M 0% /dev/shm /dev/sda1 485M 105M 355M 23% /boot
2. Run fsck on your filesystem
[root@foo1 ~]# e2fsck -f /dev/sdb1 e2fsck 1.41.12 (17-May-2010) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/sdb1: 15/261120 files (0.0% non-contiguous), 363953/1044192 blocks
3. Resize the filesystem with resize2fs
[root@foo1 ~]# resize2fs /dev/sdb1 400M resize2fs 1.41.12 (17-May-2010) Resizing the filesystem on /dev/sdb1 to 409600 (1k) blocks. The filesystem on /dev/sdb1 is now 409600 blocks long.
4. Delete the partition
[root@foo1 ~]# fdisk /dev/sdb WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): d Selected partition 1 Command (m for help): p Disk /dev/sdb: 1073 MB, 1073741824 bytes 255 heads, 63 sectors/track, 130 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2dbb9f13 Device Boot Start End Blocks Id System Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
4. Create a new (smaller) partition
[root@foo1 ~]# fdisk /dev/sdb WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-130, default 1): Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-130, default 130): +400M Command (m for help): p Disk /dev/sdb: 1073 MB, 1073741824 bytes 255 heads, 63 sectors/track, 130 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2dbb9f13 Device Boot Start End Blocks Id System /dev/sdb1 1 52 417658+ 83 Linux Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
5. Mount the new partition and filesystem
[root@foo1 ~]# mount /dev/sdb1 /geekpeek/ [root@foo1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_foo-LogVol01 13G 4.6G 7.7G 38% / tmpfs 376M 0 376M 0% /dev/shm /dev/sda1 485M 105M 355M 23% /boot /dev/sdb1 388M 323M 45M 88% /geekpeek
Voila! The partition was successfully reduced to 400MB, as we can see all of the data survived!
Always
remember to resize the filesystem with resize2fs.
相关文章推荐
- 通过vmware-vdiskmanager增加虚拟机Linux硬盘空间
- 通过vmware-vdiskmanager增加虚拟机Linux硬盘空间
- 增加虚拟机硬盘空间大小
- 如何增加VM Ware虚拟机的硬盘空间
- 虚拟机硬盘增加空间
- 通过新建一个硬盘来给vmware8.01虚拟机增加磁盘空间
- [虚拟机VMware_Ubuntu]VMware虚拟机Ubuntu增加硬盘空间及Android4.1源代码下载
- 如何在虚拟机ubuntu上增加硬盘空间
- vmware-vdiskmanager增加虚拟机Linux硬盘空间
- 为vmware增加空间扩展分区(vmware空间不够)-扩展虚拟机硬盘空间-by
- X Chen笔记---KVM调整虚拟机硬盘大小
- 如何增加虚拟机的硬盘
- [vm]增加硬盘空间
- VMware Ubuntu增加硬盘空间图文教程
- 虚拟机 Linux 系统增加换页空间
- 搞定在虚拟机内增加硬盘(centOS 5.5 x64)
- kvm中虚拟机的硬盘扩容
- mac+virtualbox+ubuntu 增加ubuntu硬盘空间
- Vmware为Linux虚拟机增加硬盘空间
- kvm 下运行的 WINWS7磁盘空间不足 增加磁盘 实战(这个有问题,还未解决)