POJ 3125 (Queue)
2014-05-12 15:10
141 查看
Printer Queue
Description
The only printer in the computer science students' union is experiencing an extremely heavy workload. Sometimes there are a hundred jobs in the printer queue and you may have to wait for hours
to get a single page of output.
Because some jobs are more important than others, the Hacker General has invented and implemented a simple priority system for the print job queue. Now, each job is assigned a priority between 1 and 9 (with 9 being the highest priority,
and 1 being the lowest), and the printer operates as follows.
The first job J in queue is taken from the queue.
If there is some job in the queue with a higher priority than job J, thenmove J to the end of the queue without printing it.
Otherwise, print job J (and do not put it back in the queue).
In this way, all those importantmuffin recipes that the Hacker General is printing get printed very quickly. Of course, those annoying term papers that others are printing may have to wait for quite some time to get printed, but that's life.
Your problem with the new policy is that it has become quite tricky to determine when your print job will actually be completed. You decide to write a program to figure this out. The program will be given the current queue (as a list of priorities) as well
as the position of your job in the queue, and must then calculate how long it will take until your job is printed, assuming that no additional jobs will be added to the queue. To simplifymatters, we assume that printing a job always takes exactly one minute,
and that adding and removing jobs from the queue is instantaneous.
Input
One line with a positive integer: the number of test cases (at most 100). Then for each test case:
One line with two integers n and m, where n is the number of jobs in the queue (1 ≤ n ≤ 100) and m is the position of your job (0 ≤ m ≤ n −1). The first position in the queue is number 0, the second is number 1, and so on.
One linewith n integers in the range 1 to 9, giving the priorities of the jobs in the queue. The first integer gives the priority of the first job, the second integer the priority of the second job, and so on.
Output
For each test case, print one line with a single integer; the number of minutes until your job is completely printed, assuming that no additional print jobs will arrive.
Sample Input
3
1 0
5
4 2
1 2 3 4
6 0
1 1 9 1 1 1
Sample Output
1
2
5
队列模拟
队列模拟
Time Limit: 1000MS | Memory Limit: 65536K | |
Total Submissions: 2817 | Accepted: 1523 |
The only printer in the computer science students' union is experiencing an extremely heavy workload. Sometimes there are a hundred jobs in the printer queue and you may have to wait for hours
to get a single page of output.
Because some jobs are more important than others, the Hacker General has invented and implemented a simple priority system for the print job queue. Now, each job is assigned a priority between 1 and 9 (with 9 being the highest priority,
and 1 being the lowest), and the printer operates as follows.
The first job J in queue is taken from the queue.
If there is some job in the queue with a higher priority than job J, thenmove J to the end of the queue without printing it.
Otherwise, print job J (and do not put it back in the queue).
In this way, all those importantmuffin recipes that the Hacker General is printing get printed very quickly. Of course, those annoying term papers that others are printing may have to wait for quite some time to get printed, but that's life.
Your problem with the new policy is that it has become quite tricky to determine when your print job will actually be completed. You decide to write a program to figure this out. The program will be given the current queue (as a list of priorities) as well
as the position of your job in the queue, and must then calculate how long it will take until your job is printed, assuming that no additional jobs will be added to the queue. To simplifymatters, we assume that printing a job always takes exactly one minute,
and that adding and removing jobs from the queue is instantaneous.
Input
One line with a positive integer: the number of test cases (at most 100). Then for each test case:
One line with two integers n and m, where n is the number of jobs in the queue (1 ≤ n ≤ 100) and m is the position of your job (0 ≤ m ≤ n −1). The first position in the queue is number 0, the second is number 1, and so on.
One linewith n integers in the range 1 to 9, giving the priorities of the jobs in the queue. The first integer gives the priority of the first job, the second integer the priority of the second job, and so on.
Output
For each test case, print one line with a single integer; the number of minutes until your job is completely printed, assuming that no additional print jobs will arrive.
Sample Input
3
1 0
5
4 2
1 2 3 4
6 0
1 1 9 1 1 1
Sample Output
1
2
5
队列模拟
#include <iostream> #include <cstdio> #include <queue> #include <algorithm> using namespace std; struct job { int priority; int index; }; bool cmp(int l, int r) { return l > r; } int printer() { //freopen("printer_testcase", "r", stdin); int C; cin >> C; while(C--) { int n,m; cin >> n >> m; int a[101]; job j[101]; queue<job> q; for(int i = 0; i < n; i++) { cin>>a[i]; j[i].index = i; j[i].priority = a[i]; q.push(j[i]); } sort(a, a+n, cmp); int time = 0; int top = 0; while(1) { job tmp = q.front(); q.pop(); if(tmp.index == m && tmp.priority == a[top]) { break; } else if(tmp.index != m && tmp.priority == a[top]) { top++; time++; } else { q.push(tmp); } } cout << time <<endl; } return 0; }
队列模拟
相关文章推荐
- POJ 3125 Printer Queue【暴力模拟】
- poj 3125 Printer Queue
- POJ 2227 FloodFill (priority_queue)
- 【动态规划】poj 3934 Queue
- POJ 2259 Team Queue
- poj 3614 Sunscreen(priority_queue && Greedy)
- POJ 1862 Stripies priority_queue 单调队列
- poj 3125 Printer Queue (队列)
- POJ 3125 (13.07.15)
- POJ 2259 Team Queue
- POJ 3934 Queue(DP)
- poj 3481 Double Queue STL中map的运用
- POJ 3481 Double Queue splay
- poj 3481 Double Queue splay
- POJ 2312Battle City(BFS-priority_queue 或者是建图spfa)
- 优先队列(priority_queue)的cmp,POJ(2051)
- POJ 2259 Team Queue
- POJ 1062 priority_queue + Dijkstra (临界表) 实现
- (队列的应用5.3.2)POJ 2259 Team Queue(队列数组的使用)
- poj 3125 list模拟