NWPA Update Package Installation Instructions for
2014-03-31 17:34
459 查看
http://developer.novell.com/devres/storage/drivers/NWPA_Up_411.html NWPA Update Package Installation Instructions for NetWare 4.11 |
For new NetWare 4.11 servers:From the website athttp://developer.novell.com/devres/storage/drivers/index.html click on the Update Your NetWare 3.12 or 4.11 Server to Work With NWPA link and download the NWPA Update Package ( NWPA_UP.EXE) at the NWPA Update Package link and the installation instructions (this file) from the NWPA Update Package Installation Instructions for NetWare 4.11 link on the same page. Install DOS and the CD-ROM driver on the target server machine. Create the C:\UPDATEdirectory. Copy NWPA_UP.EXEto C:\UPDATE Enter the following commands at the DOS prompt: c: cd \update nwpa_up -o If you have any new .HAMor .LANdrivers, or those whose versions are later than those already on the NetWare 4.11 CD-ROM, copy those files, plus their .DDIand .LDIfiles, to C:\UPDATEas well. Insert the NetWare 4.11 CD-ROM into the CD-ROM drive and the NetWare 4.11 License diskette into the floppy drive. Change directory to the D:\directory on the CD-ROM, if its drive letter is D: Install NetWare 4.11 by entering installat the DOS command line. Proceed through a Custom installation of NetWare 4.11 as usual. When the installation program prompts you to add any special startup set commands to STARTUP.NCF, add the following lines after those already present: load c:\update\nwpa load c:\update\nbi load c:\update\idehd load c:\update\idecd load c:\update\scsihd load c:\update\scsicd load c:\update\ideata port=1f0 int=e load c:\update\ideata port=170 int=f When prompted by the installation program to select a storage or LAN driver to install, select it from the C:\UPDATEdirectory. After all desired storage and LAN drivers have been selected, select Use the CD-ROM to get drivers, then continue the installation by creating NetWare partitions and volumes as needed. When prompted by the installation program to edit AUTOEXEC.NCF, add the following lines after those already present: load c:\update\cdrom cd mount xxxxx If you know the ISO9660 name of your CD-ROM volume, replace the xxxxx with that name. Press <F10> to save the AUTOEXEC.NCFfile and begin the Main Copy to proceed and complete the NetWare 4.11 installation. Remove the NetWare 4.11 CD-ROM and the NetWare 4.11 License diskette. Enter downand then restart serverat the server console to reboot the server. For currently installed NetWare 4.11 servers:From the website athttp://developer.novell.com/devres/storage/drivers/index.html click on the Update Your NetWare 3.12 or 4.11 Server to Work With NWPA link and download the NWPA Update Package ( NWPA_UP.EXE) at the NWPA Update Package link and the installation instructions (this file) from the NWPA Update Package Installation Instructions for NetWare 4.11 link on the same page. Create the C:\UPDATEdirectory. Copy NWPA_UP.EXEto C:\UPDATE Enter the following commands at the DOS prompt: c: cd \update nwpa_up -o If you have any new .HAMor .LANdrivers, or those whose versions are later than those already on your server, copy those files plus their .DDIand .LDIfiles, to C:\UPDATEas well. Change directory to the C:\NWSERVERdirectory. Edit STARTUP.NCFand add the following lines after any set parameters but just before any lines that load drivers: load c:\update\nwpa load c:\update\nbi load c:\update\idehd load c:\update\idecd load c:\update\scsihd load c:\update\scsicd load c:\update\ideata port=1f0 int=e load c:\update\ideata port=170 int=f Add or replace subsequent lines of the STARTUP.NCFfile to load new or updated .HAMand .LANdrivers from the C:\UPDATEdirectory, delete all other lines that load drivers, save the file, and exit to DOS. Enter serverto start the server. At the server console enter load install Edit AUTOEXEC.NCF, and replace the line to load CDROM.NLMwith the following lines: load c:\update\cdrom cd mount xxxxx If you know the ISO9660 name of your CD-ROM volume, replace the xxxxx with that name. Enter downand then restart serverat the server console to reboot the server. |
0
上一篇:深圳好大雨
下一篇:[ZT]Novell网常见问题解答
相关热门文章
oracle数据库中,用SQL Select...
Android系统recovery分析之upd...
[转载]Android apk签名的...
Consult the size
android 编程一
承接自动化测试培训、外包、实...
Solaris PowerTOP 1.0 发布
For STKMonitor
busybox的httpd使用CGI脚本(Bu...
项目小体会
IBM DS3400 盘阵怎么查看是单...
启动auditd时,报错如下,怎么...
CGSL系统中root密码正确,但无...
在CGSL系统中,如何为不同的用...
CGSL系统如何设置交换分区的大...
给主人留下些什么吧!~~
评论热议
相关文章推荐
- 深圳好大雨
- 网络系统容错分析与NOVELLⅡ级镜像容错实施
- NT网卡和Novell网卡互用
- [ZT]Novell网故障三例的排除
- [杂]关于NSString类型转换问题
- 发现没有一篇宝宝的日记
- winsock repair tool
- 最近有些不顺
- [ZT]如何删除文字服务(win2000)
- 添加/删除程序无法打开,解决一例
- 三个系统错误,没有找到解决方法
- [ZT]win2000删除默认共享
- [ZT]FSMO五种角色的作用、查找及规划
- 太累了
- BIND DNS转发器:Forwarders
- [ZT]Windows 2003安全事件ID分析(1)
- 在域控制器中增加一特殊受限用户
- [ZT]Win2003网站服务器的安全配置
- [ZT]破解win2003“终端服务器授权”激活许可证
- [ZT]Windows 2000/03域和活动目录上手概述