关于quartus II 13.1 的USB-Blaster和ModelSim-Altera 10.1d的问题
2013-12-31 21:53
274 查看
今天下了个quartus II 13.1,但在下载测试时,发现下载不了,但能被电脑识别。自己之前在网上下了个驱动,用的是下的那个驱动,发现怎么弄也下不了,后来发现在软件的安装目录下就带有驱动程序,在第一次安装驱动时找到自己对应的安装目录装好驱动,然后就可以在下载测试时下载了。注意64位和32位的选着。
在用ModelSim-Altera进行仿真是出现," Can't launch the ModelSim-Altera software -- the path to
the location of the executables for the ModelSim-Altera software were not specified or the executables were not found at specified path ......"。首先有可能安装路劲出现了中文,但路径没问题也出现了该问题,解决方法是先将 tool --> operation 中ModelSim-Altera的路径改成错的安装路径,进行一次RTL仿真,这时将仿真出错,再将 tool
--> operation 中ModelSim-Altera的路径改成正确的安装路径,在进行一次RTL仿真,这时将发现仿真成功。
在用ModelSim-Altera进行仿真是出现," Can't launch the ModelSim-Altera software -- the path to
the location of the executables for the ModelSim-Altera software were not specified or the executables were not found at specified path ......"。首先有可能安装路劲出现了中文,但路径没问题也出现了该问题,解决方法是先将 tool --> operation 中ModelSim-Altera的路径改成错的安装路径,进行一次RTL仿真,这时将仿真出错,再将 tool
--> operation 中ModelSim-Altera的路径改成正确的安装路径,在进行一次RTL仿真,这时将发现仿真成功。
相关文章推荐
- 关于 Quartus II 13.1中调用ModelSim-Altera 10.1d 报错问题
- 关于Windows7/8/10系统中Altera USB-Blaster驱动的安装问题
- 关于在Quartus II和ModelSim中进行FPGA仿真报错的问题
- 关于Quartus ii无法识别Modelsim路径的问题
- 关于Quartus II 和Modelsim远程登录的问题
- 解决ubuntu14.04使用Quartus II无法调用Modelsim-Altera的问题
- Quartus II 中调用ModelSim-Altera 报错问题
- Altera Quartus 13.1 仿真工具路径错误问题解决 Can't launch the ModelSim-Altera software
- Win8.1下安装Altera USB-Blaster驱动所遇到的问题:第三方INF不包含数字签名信息
- 关于Linux初次获取USB设备描述符策略问题(8 or 64)
- Altera usb-blaster驱动无法安装的解决办法
- 关于C#上位机的usb_hid通信相关问题说明
- 关于小米手机USB传输稍大点的文件老中断的问题解决方法!
- Quartus II 与ModelSim-Altera联合仿真PLL
- 关于fl2440开发板Linux内核添加USB驱动的问题
- 如何在Quartus II 11.0中调用ModelSim-Altera 6.5e
- Quartusii9.1调用(联调)ModelSim-Altera 6.5b (Quartus II 9.1) Starter Edition
- 关于Linux下usb(vfat格式)挂载中文乱码问题的解决
- QuartusII 13.0自带的Modelsim Altera 10.1d破解
- 关于使用ModelSim中编写testbench模板问题