linux下使用indent整理代码
2013-12-26 12:50
567 查看
indent是linux下一个能力极强的代码整理软件,使用他,可以轻松的写出代码风格十分精良的代码。
但是indent的参数太多,使用起来不是很容易,怎么办呢?
查看
/usr/src/linux-headers-<版本>/scripts/Lindent
文件 ,可以看到一行代码:
indent -npro -kr -i8 -ts8 -sob -l80 -ss -ncs -cp1
这一行就是linux内核使用indent整理代码的格式,使用这条命令就可以实现风格十分良好的C或C++代码
其中-l80是每一行最多80个字母,超出会拆行,如果不喜欢可以使用更长的行字数
使用的indent参数 值 含义
--blank-lines-after-declarations bad 变量声明后加空行
--blank-lines-after-procedures bap 函数结束后加空行
--blank-lines-before-block-comments bbb 块注释前加空行
--break-before-boolean-operator bbo 较长的行,在逻辑运算符前分行
--blank-lines-after-commas nbc 变量声明中,逗号分隔的变量不分行
--braces-after-if-line bl "if"和"{"分做两行
--brace-indent 0 bli0 "{"不继续缩进
--braces-after-struct-decl-line bls 定义结构,"struct"和"{"分行
--comment-indentationn c33 语句后注释开始于行33
--declaration-comment-columnn cd33 变量声明后注释开始于行33
--comment-delimiters-on-blank-lines ncdb 不将单行注释变为块注释
--cuddle-do-while ncdw "do --- while"的"while"和其前面的"}"另起一行
--cuddle-else nce "else"和其前面的"}"另起一行
--case-indentation 0 cli0 switch中的case语句所进0个空格
--else-endif-columnn cp33 #else, #endif后面的注释开始于行33
--space-after-cast cs 在类型转换后面加空格
--line-comments-indentation n d0 单行注释(不从1列开始的),不向左缩进
--break-function-decl-args nbfda 关闭:函数的参数一个一行
--declaration-indentationn di2 变量声明,变量开始于2行,即不必对齐
--format-first-column-comments nfc1 不格式化起于第一行的注释
--format-all-comments nfca 不开启全部格式化注释的开关
--honour-newlines hnl Prefer to break long lines at the position of newlines in the input.
--indent-leveln i4 设置缩进多少字符,如果为tab的整数倍,用tab来缩进,否则用空格填充。
--parameter-indentationn ip5 旧风格的函数定义中参数说明缩进5个空格
--line-length 75 l75 非注释行最长75
--continue-at-parentheses lp 续行从上一行出现的括号开始
--space-after-procedure-calls pcs 函数和"("之间插入一个空格
--space-after-parentheses nprs 在"("后")"前不插入空格
--procnames-start-lines psl 将函数名和返回类型放在两行定义
--space-after-for saf for后面有空格
--space-after-if sai if后面有空格
--space-after-while saw while后面有空格
--start-left-side-of-comments nsc 不在生成的块注释中加*
--swallow-optional-blank-lines nsob 不去掉可添加的空行
--space-special-semicolon nss 一行的for或while语句,在";"前不加空。
--tab-size ts4 一个tab为4个空格(要能整除"-in")
--use-tabs ut 使用tab来缩进
文章出处:http://www.diybl.com/course/3_program/c++/cppsl/2008829/138499.html
但是indent的参数太多,使用起来不是很容易,怎么办呢?
查看
/usr/src/linux-headers-<版本>/scripts/Lindent
文件 ,可以看到一行代码:
indent -npro -kr -i8 -ts8 -sob -l80 -ss -ncs -cp1
这一行就是linux内核使用indent整理代码的格式,使用这条命令就可以实现风格十分良好的C或C++代码
其中-l80是每一行最多80个字母,超出会拆行,如果不喜欢可以使用更长的行字数
使用的indent参数 值 含义
--blank-lines-after-declarations bad 变量声明后加空行
--blank-lines-after-procedures bap 函数结束后加空行
--blank-lines-before-block-comments bbb 块注释前加空行
--break-before-boolean-operator bbo 较长的行,在逻辑运算符前分行
--blank-lines-after-commas nbc 变量声明中,逗号分隔的变量不分行
--braces-after-if-line bl "if"和"{"分做两行
--brace-indent 0 bli0 "{"不继续缩进
--braces-after-struct-decl-line bls 定义结构,"struct"和"{"分行
--comment-indentationn c33 语句后注释开始于行33
--declaration-comment-columnn cd33 变量声明后注释开始于行33
--comment-delimiters-on-blank-lines ncdb 不将单行注释变为块注释
--cuddle-do-while ncdw "do --- while"的"while"和其前面的"}"另起一行
--cuddle-else nce "else"和其前面的"}"另起一行
--case-indentation 0 cli0 switch中的case语句所进0个空格
--else-endif-columnn cp33 #else, #endif后面的注释开始于行33
--space-after-cast cs 在类型转换后面加空格
--line-comments-indentation n d0 单行注释(不从1列开始的),不向左缩进
--break-function-decl-args nbfda 关闭:函数的参数一个一行
--declaration-indentationn di2 变量声明,变量开始于2行,即不必对齐
--format-first-column-comments nfc1 不格式化起于第一行的注释
--format-all-comments nfca 不开启全部格式化注释的开关
--honour-newlines hnl Prefer to break long lines at the position of newlines in the input.
--indent-leveln i4 设置缩进多少字符,如果为tab的整数倍,用tab来缩进,否则用空格填充。
--parameter-indentationn ip5 旧风格的函数定义中参数说明缩进5个空格
--line-length 75 l75 非注释行最长75
--continue-at-parentheses lp 续行从上一行出现的括号开始
--space-after-procedure-calls pcs 函数和"("之间插入一个空格
--space-after-parentheses nprs 在"("后")"前不插入空格
--procnames-start-lines psl 将函数名和返回类型放在两行定义
--space-after-for saf for后面有空格
--space-after-if sai if后面有空格
--space-after-while saw while后面有空格
--start-left-side-of-comments nsc 不在生成的块注释中加*
--swallow-optional-blank-lines nsob 不去掉可添加的空行
--space-special-semicolon nss 一行的for或while语句,在";"前不加空。
--tab-size ts4 一个tab为4个空格(要能整除"-in")
--use-tabs ut 使用tab来缩进
文章出处:http://www.diybl.com/course/3_program/c++/cppsl/2008829/138499.html
相关文章推荐
- 关于Ubuntu 11.10启动提示waiting for the network configuration的问题
- Linux 与 Windows 对UNICODE 的处理方式
- Ubuntu12.04下QQ完美走起啊!走起啊!有木有啊!
- 解決Linux下Android开发真机调试设备不被识别问题
- ubuntu下chrome无法同步问题解决
- 运维入门
- 运维提升
- Linux 自检和 SystemTap
- 菜鸟说给菜鸟听之VIM--入门篇(1)
- Ubuntu Linux使用体验
- c语言实现hashmap(转载)
- Linux 信号signal处理机制
- linux下mysql添加用户
- 关于指针的一些事情
- 以Ubuntu 9.04为例 将工作环境迁移到 Linux
- Scientific Linux 5.5 图形安装教程
- VirtualBox虚拟机XP与宿主机Ubuntu互访共享文件夹
- 基于 Linux 集群环境上 GPFS 的问题诊断