cygwin安装sshd服务(win7)Error installing a service: OpenSCManager: Win32 error 5:
2013-12-04 14:55
477 查看
Error installing a service: OpenSCManager: Win32 error 5:
出现这个问题的解决办法：win7系统管理员运行Cygwin软件
正确的过程为：
sony@sony-VAIO~ $ ssh-host-config
*** Info: Generating /etc/ssh_host_key
*** Info: Generating /etc/ssh_host_rsa_key
*** Info: Generating /etc/ssh_host_dsa_key
*** Info: Generating /etc/ssh_host_ecdsa_key
*** Info: Creating default /etc/ssh_config file
*** Info: Creating default /etc/sshd_config file
*** Info: Privilege separation is set to yes by default since OpenSSH 3.3.
*** Info: However, this requires a non-privileged account called 'sshd'.
*** Info: For more info on privilege separation read /usr/share/doc/openssh/READ
ME.privsep.
*** Query: Should privilege separation be used? (yes/no) no
*** Info: Updating /etc/sshd_config file
*** Query: Do you want to install sshd as a service?
*** Query: (Say "no" if it is already installed as a service) (yes/no) yes
*** Query: Enter the value of CYGWIN for the daemon: netsec] netsec
*** Info: On Windows Server 2003, Windows Vista, and above, the
*** Info: SYSTEM account cannot setuid to other users -- a capability
*** Info: sshd requires. You need to have or to create a privileged
*** Info: account. This script will help you do so.
*** Info: You appear to be running Windows XP 64bit, Windows 2003 Server,
*** Info: or later. On these systems, it's not possible to use the LocalSystem
*** Info: account for services that can change the user id without an
*** Info: explicit password (such as passwordless logins [e.g. public key
*** Info: authentication] via sshd).
*** Info: If you want to enable that functionality, it's required to create
*** Info: a new account with special privileges (unless a similar account
*** Info: already exists). This account is then used to run these special
*** Info: servers.
*** Info: Note that creating a new user requires that the current account
*** Info: have Administrator privileges itself.
*** Info: No privileged account could be found.
*** Info: This script plans to use 'cyg_server'.
*** Info: 'cyg_server' will only be used by registered services.
*** Query: Do you want to use a different name? (yes/no) yes
*** Query: Enter the new user name: sony
*** Query: Reenter: sony
*** Warning: Privileged account 'sony' was specified,
*** Warning: but it does not have the necessary privileges.
*** Warning: Continuing, but will probably use a different account.
*** Warning: The specified account 'sony' does not have the
*** Warning: required permissions or group memberships. This may
*** Warning: cause problems if not corrected; continuing...
*** Query: Please enter the password for user 'sony':
*** Query: Reenter:
*** Info: The sshd service has been installed under the 'sony'
*** Info: account. To start the service now, call `net start sshd' or
*** Info: `cygrunsrv -S sshd'. Otherwise, it will start automatically
*** Info: after the next reboot.
*** Info: Host configuration finished. Have fun!
$ net start sshd
发生系统错误 1069 --- 表示由于登录失败而无法启动服务
解决方法：在cmd中输入services.msc即可打开windows的服务，在服务中把密码改对就可以了。
（在上面配置ssh的过程中我的用户名是：sony 密码是：123456）
sshd服务装成功如下：
[plain]
view plaincopyprint?
sony@sony-VAIO ~ $ net start sshd CYGWIN sshd 服务正在启动 . CYGWIN sshd 服务已经启动成功
接下来是配置无密码登陆：
[plain]
view plaincopyprint?
sony@sony-VAIO ~ $ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/sony/.ssh/id_rsa):
Created directory '/home/sony/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/sony/.ssh/id_rsa.
Your public key has been saved in /home/sony/.ssh/id_rsa.pub.
The key fingerprint is:
e8:38:5e:e3:bb:cf:76:03:61:5f:f2:68:ed:a3:49:db sony@sony-VAIO
The key's randomart image is:
+--[ RSA 2048]----+
| |
| |
| |
| .o . . |
| ..So * |
| o . + o |
| o + o.. |
| . + o..o+o |
| . +=o.+oE. |
+-----------------+
sony@sony-VAIO ~ $ cd .ssh/
sony@sony-VAIO ~/.ssh $ ls
id_rsa id_rsa.pub
sony@sony-VAIO ~/.ssh $ cp id_rsa.pub authorized_keys
sony@sony-VAIO ~/.ssh $ ls
authorized_keys id_rsa id_rsa.pub
验证如下：
[plain]
view plaincopyprint?
sony@sony-VAIO ~/.ssh $ ssh localhost
The authenticity of host 'localhost (::1)' can't be established.
ECDSA key fingerprint is 5f:21:b1:24:80:92:f6:af:3e:e3:a8:f9:cb:a4:4f:ec.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'localhost' (ECDSA) to the list of known hosts.
sony@sony-VAIO ~ $ who
sony tty0 2011-11-25 15:42 (::1)
出现这个问题的解决办法：win7系统管理员运行Cygwin软件
正确的过程为：
sony@sony-VAIO~ $ ssh-host-config
*** Info: Generating /etc/ssh_host_key
*** Info: Generating /etc/ssh_host_rsa_key
*** Info: Generating /etc/ssh_host_dsa_key
*** Info: Generating /etc/ssh_host_ecdsa_key
*** Info: Creating default /etc/ssh_config file
*** Info: Creating default /etc/sshd_config file
*** Info: Privilege separation is set to yes by default since OpenSSH 3.3.
*** Info: However, this requires a non-privileged account called 'sshd'.
*** Info: For more info on privilege separation read /usr/share/doc/openssh/READ
ME.privsep.
*** Query: Should privilege separation be used? (yes/no) no
*** Info: Updating /etc/sshd_config file
*** Query: Do you want to install sshd as a service?
*** Query: (Say "no" if it is already installed as a service) (yes/no) yes
*** Query: Enter the value of CYGWIN for the daemon: netsec] netsec
*** Info: On Windows Server 2003, Windows Vista, and above, the
*** Info: SYSTEM account cannot setuid to other users -- a capability
*** Info: sshd requires. You need to have or to create a privileged
*** Info: account. This script will help you do so.
*** Info: You appear to be running Windows XP 64bit, Windows 2003 Server,
*** Info: or later. On these systems, it's not possible to use the LocalSystem
*** Info: account for services that can change the user id without an
*** Info: explicit password (such as passwordless logins [e.g. public key
*** Info: authentication] via sshd).
*** Info: If you want to enable that functionality, it's required to create
*** Info: a new account with special privileges (unless a similar account
*** Info: already exists). This account is then used to run these special
*** Info: servers.
*** Info: Note that creating a new user requires that the current account
*** Info: have Administrator privileges itself.
*** Info: No privileged account could be found.
*** Info: This script plans to use 'cyg_server'.
*** Info: 'cyg_server' will only be used by registered services.
*** Query: Do you want to use a different name? (yes/no) yes
*** Query: Enter the new user name: sony
*** Query: Reenter: sony
*** Warning: Privileged account 'sony' was specified,
*** Warning: but it does not have the necessary privileges.
*** Warning: Continuing, but will probably use a different account.
*** Warning: The specified account 'sony' does not have the
*** Warning: required permissions or group memberships. This may
*** Warning: cause problems if not corrected; continuing...
*** Query: Please enter the password for user 'sony':
*** Query: Reenter:
*** Info: The sshd service has been installed under the 'sony'
*** Info: account. To start the service now, call `net start sshd' or
*** Info: `cygrunsrv -S sshd'. Otherwise, it will start automatically
*** Info: after the next reboot.
*** Info: Host configuration finished. Have fun!
sony@sony-VAIO~ $ ssh-host-config *** Info: Generating /etc/ssh_host_key *** Info: Generating /etc/ssh_host_rsa_key *** Info: Generating /etc/ssh_host_dsa_key *** Info: Generating /etc/ssh_host_ecdsa_key *** Info: Creating default /etc/ssh_config file *** Info: Creating default /etc/sshd_config file *** Info: Privilege separation is set to yes by default since OpenSSH 3.3. *** Info: However, this requires a non-privileged account called 'sshd'. *** Info: For more info on privilege separation read /usr/share/doc/openssh/READ ME.privsep. *** Query: Should privilege separation be used? (yes/no) no *** Info: Updating /etc/sshd_config file *** Query: Do you want to install sshd as a service? *** Query: (Say "no" if it is already installed as a service) (yes/no) yes *** Query: Enter the value of CYGWIN for the daemon: netsec] netsec *** Info: On Windows Server 2003, Windows Vista, and above, the *** Info: SYSTEM account cannot setuid to other users -- a capability *** Info: sshd requires. You need to have or to create a privileged *** Info: account. This script will help you do so. *** Info: You appear to be running Windows XP 64bit, Windows 2003 Server, *** Info: or later. On these systems, it's not possible to use the LocalSystem *** Info: account for services that can change the user id without an *** Info: explicit password (such as passwordless logins [e.g. public key *** Info: authentication] via sshd). *** Info: If you want to enable that functionality, it's required to create *** Info: a new account with special privileges (unless a similar account *** Info: already exists). This account is then used to run these special *** Info: servers. *** Info: Note that creating a new user requires that the current account *** Info: have Administrator privileges itself. *** Info: No privileged account could be found. *** Info: This script plans to use 'cyg_server'. *** Info: 'cyg_server' will only be used by registered services. *** Query: Do you want to use a different name? (yes/no) yes *** Query: Enter the new user name: sony *** Query: Reenter: sony *** Warning: Privileged account 'sony' was specified, *** Warning: but it does not have the necessary privileges. *** Warning: Continuing, but will probably use a different account. *** Warning: The specified account 'sony' does not have the *** Warning: required permissions or group memberships. This may *** Warning: cause problems if not corrected; continuing... *** Query: Please enter the password for user 'sony': *** Query: Reenter: *** Info: The sshd service has been installed under the 'sony' *** Info: account. To start the service now, call `net start sshd' or *** Info: `cygrunsrv -S sshd'. Otherwise, it will start automatically *** Info: after the next reboot. *** Info: Host configuration finished. Have fun!
$ net start sshd
发生系统错误 1069 --- 表示由于登录失败而无法启动服务
解决方法：在cmd中输入services.msc即可打开windows的服务，在服务中把密码改对就可以了。
（在上面配置ssh的过程中我的用户名是：sony 密码是：123456）
sshd服务装成功如下：
[plain]
view plaincopyprint?
sony@sony-VAIO ~ $ net start sshd CYGWIN sshd 服务正在启动 . CYGWIN sshd 服务已经启动成功
sony@sony-VAIO ~ $ net start sshd CYGWIN sshd 服务正在启动 . CYGWIN sshd 服务已经启动成功
接下来是配置无密码登陆：
[plain]
view plaincopyprint?
sony@sony-VAIO ~ $ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/sony/.ssh/id_rsa):
Created directory '/home/sony/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/sony/.ssh/id_rsa.
Your public key has been saved in /home/sony/.ssh/id_rsa.pub.
The key fingerprint is:
e8:38:5e:e3:bb:cf:76:03:61:5f:f2:68:ed:a3:49:db sony@sony-VAIO
The key's randomart image is:
+--[ RSA 2048]----+
| |
| |
| |
| .o . . |
| ..So * |
| o . + o |
| o + o.. |
| . + o..o+o |
| . +=o.+oE. |
+-----------------+
sony@sony-VAIO ~ $ cd .ssh/
sony@sony-VAIO ~/.ssh $ ls
id_rsa id_rsa.pub
sony@sony-VAIO ~/.ssh $ cp id_rsa.pub authorized_keys
sony@sony-VAIO ~/.ssh $ ls
authorized_keys id_rsa id_rsa.pub
sony@sony-VAIO ~ $ ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/home/sony/.ssh/id_rsa): Created directory '/home/sony/.ssh'. Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/sony/.ssh/id_rsa. Your public key has been saved in /home/sony/.ssh/id_rsa.pub. The key fingerprint is: e8:38:5e:e3:bb:cf:76:03:61:5f:f2:68:ed:a3:49:db sony@sony-VAIO The key's randomart image is: +--[ RSA 2048]----+ | | | | | | | .o . . | | ..So * | | o . + o | | o + o.. | | . + o..o+o | | . +=o.+oE. | +-----------------+ sony@sony-VAIO ~ $ cd .ssh/ sony@sony-VAIO ~/.ssh $ ls id_rsa id_rsa.pub sony@sony-VAIO ~/.ssh $ cp id_rsa.pub authorized_keys sony@sony-VAIO ~/.ssh $ ls authorized_keys id_rsa id_rsa.pub
验证如下：
[plain]
view plaincopyprint?
sony@sony-VAIO ~/.ssh $ ssh localhost
The authenticity of host 'localhost (::1)' can't be established.
ECDSA key fingerprint is 5f:21:b1:24:80:92:f6:af:3e:e3:a8:f9:cb:a4:4f:ec.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'localhost' (ECDSA) to the list of known hosts.
sony@sony-VAIO ~ $ who
sony tty0 2011-11-25 15:42 (::1)
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- cygwin安装sshd服务(win7)Error installing a service: OpenSCManager: Win32 error 5:
- win server 2003,Vista,7或以上版本Cygwin安装sshd报错:Error installing a service:CreateService:win32 error 1057
- Spark:windows平台上配置cygwin错误总结——ERROR: Installing sshd as a service failed!
- windows平台上配置cygwin错误总结——ERROR: Installing sshd as a service failed!
- win7下安装cygwin并配置sshd服务（安装配置记录）
- Windows 平台下安装Cygwin后，sshd服务无法启动
- 安装Mysql后，服务启动不了，出现"Could not start the service mysql error"错误
- 2014-05-17：安装mysql-5-win32时提示Could not start the service Mysql！Error ：0最佳解决方案
- win7安装svn服务 [sc] openSCManager 失败 5 拒绝 访问拒绝
- Windows 平台下安装Cygwin后，sshd服务无法启动
- Windows 平台下安装Cygwin后，sshd服务无法启动
- cygwin 安装sshd服务
- 在win7上安装vs2008后没有ASP.NET State Service服务？解决办法
- Windows 平台下安装Cygwin后，sshd服务无法启动解决办法
- cygwin安装sshd服务并实现无密码登录
- 安装完MySQL 5.1，在最后配置启动服务时，出现could not start the service MySQL.Error:0 错误
- win7(家庭普通版)安装svn服务 [sc] openSCManager 失败 5 拒绝 访问拒绝
- cygwin下安装sshd服务
- 安装 cygwin sshd 服务遇到的问题
- win7安装svnserver服务 [sc] openSCManager 失败 5 拒绝 访问拒绝