Getting Started with ASP.NET MVC 5

地址为: http://www.asp.net/mvc/tutorials/mvc-5/introduction/getting-started

Getting Started with ASP.NET MVC 5 By Rick Anderson and Prasanna Rani|October 17, 2013This tutorial will teach you the basics of building an ASP.NET MVC 5 Web application using Visual Studio 2013.  A Visual Web Developer project with C# source code is available to accompany this topic.Download the C# version. SeeBuilding the Chapter Downloads for instructions on building the sample and populating the database.
In the tutorial you run the application in Visual Studio. You can also make the application available over the Internet by deploying it to a hosting provider. Microsoft offers free web hosting for up to 10 web sites in afree Windows Azure trial account. This tutorial was written byScott Guthrie (twitter@scottgu ),Scott Hanselman  (twitter:@shanselman ), andRick Anderson (@RickAndMSFT )

Getting Started

Start by installing and runningVisual Studio Express 2013 for Web or Visual Studio 2013.
Visual Studio is an IDE, or integrated development environment. Just like you use Microsoft Word to write documents, you'll use an IDE to create applications. In Visual Studio there's a toolbar along the top showing various options available to you. There's also a menu that provides another way to perform tasks in the IDE. (For example, instead of selecting New Project from the Start page, you can use the menu and select File > New Project.)
 



 

Creating Your First Application

Click New Project, then select Visual C# on the left, then Web and then select ASP.NET  Web Application. Name your project "MvcMovie" and then click OK.


In the New ASP.NET Project dialog, click MVCand then click OK.



Visual Studio used a default template for the ASP.NET MVC project you just created, so you have a working application right now without doing anything! This is a simple "Hello World!" project, and it's a good place to start your application.


Click F5 to start debugging. F5 causes Visual Studio to start IIS Express and run your web app. Visual Studio then launches a browser and opens the application's home page. Notice that the address bar of the browser says

localhost:port#

and not something like

example.com

. That's because

localhost

always points to your own local computer, which in this case is running the application you just built. When Visual Studio runs a web project, a random port is used for the web server. In the image below, the port number is 1234. When you run the application, you'll see a different port number.


Right out of the box this default template gives you  Home, Contact and About pages.The image above doesn't show the Home, About and Contact links. Depending on the size of your browser window, you might need to click the navigation icon to see these links.


 


 The application also provides support to register and log in. The next step is to change how this application works and learn a little bit about ASP.NET MVC. Close the ASP.NET MVC application and let's change some code.

Adding a Controller By Rick Anderson|October 17, 2013MVC stands for model-view-controller. MVC is a pattern for developing applications that are well architected, testable and easy to maintain. MVC-based applications contain:Models: Classes that represent the data of the application and that use validation logic to enforce business rules for that data.
Views: Template files that your application uses to dynamically generate HTML responses.
Controllers: Classes that handle incoming browser requests, retrieve model data, and then specify view templates that return a response to the browser.
We'll be covering all these concepts in this tutorial series and show you how to use them to build an application.Let's begin by creating a controller class. In Solution Explorer, right-click the Controllers folder and then click Add, then Controller. 

In the Add Scaffold dialog box, click MVC 5 Controller - Empty, and then click Add.


 Name your new controller "HelloWorldController" and click Add.

Notice in Solution Explorer that a new file has been created named HelloWorldController.cs and a new folder Views\HelloWorld.The controller is open in the IDE.

Replace the contents of the file with the following code. using System.Web;
using System.Web.Mvc; 
 
namespace MvcMovie.Controllers 
{ 
    public class HelloWorldController : Controller 
    { 
        //
        // GET: /HelloWorld/
 
        public string Index() 
        { 
            return "This is my <b>default</b> action..."; 
        } 
 
        //
        // GET: /HelloWorld/Welcome/
 
        public string Welcome() 
        { 
            return "This is the Welcomeaction method..."; 
        } 
    } 
}The controller methods will return a string of HTML as an example. The controller is named 

HelloWorldController

 and the first method is named 

Index

. Let’s invoke it from a browser. Run the application (press F5 or Ctrl+F5). In the browser, append "HelloWorld" to the path in the address bar. (For example, in the illustration below, it's http://localhost:1234/HelloWorld.) The page in the browser will look like the following screenshot. In the method above, the code returned a string directly. You told the system to just return some HTML, and it did! 

ASP.NET MVC invokes different controller classes (and different action methods within them) depending on the incoming URL. The default URL routing logic used by ASP.NET MVC uses a format like this to determine what code to invoke:

/[Controller]/[ActionName]/[Parameters]

You set the format for routing in the App_Start/RouteConfig.cs  file.public static void RegisterRoutes(RouteCollection routes)
{
    routes.IgnoreRoute("{resource}.axd/{*pathInfo}");

    routes.MapRoute(
        name: "Default",
        url: "{controller}/{action}/{id}",
        defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
    );
}When you run the application and don't supply any URL segments, it defaults to the "Home" controller and the "Index" action method specified in the defaults section of the code above. The first part of the URL determines the controller class to execute. So /HelloWorld maps to the

 HelloWorldController

 class. The second part of the URL determines the action method on the class to execute. So /HelloWorld/Index would cause the 

Index

 method of the 

HelloWorldController

 class to execute. Notice that we only had to browse to /HelloWorld and the 

Index

 method was used by default. This is because a method named

 Index

 is the default method that will be called on a controller if one is not explicitly specified. The third part of the URL segment (

Parameters

) is for route data. We'll see route data later on in this tutorial.Browse to http://localhost:xxxx/HelloWorld/Welcome. The 

Welcome

 method runs and returns the string "This is the Welcomeaction method...". The default MVC mapping is 

/[Controller]/[ActionName]/[Parameters]

. For this URL, the controller is 

HelloWorld

 and 

Welcome

 is the action method. You haven't used the 

[Parameters]

 part of the URL yet.

Let's modify the example slightly so that you can pass some parameter information from the URL to the controller (for example, /HelloWorld/Welcome?name=Scott&numtimes=4). Change your 

Welcome

 method to include two parameters as shown below. Note that the code uses the C# optional-parameter feature to indicate that the

numTimes

 parameter should default to 1 if no value is passed for that parameter.public string Welcome(string name, int numTimes= 1) {
     return HttpUtility.HtmlEncode("Hello " + name+ ", NumTimes is: " + numTimes);
}Security Note: The code above uses HttpServerUtility.HtmlEncode to protect the application from malacious input (namely JavaScript).  For more information seeHow to: Protect Against Script Exploits in a Web Application by Applying HTML Encoding to Strings.
Run your application and browse to the example URL (http://localhost:xxxx/HelloWorld/Welcome?name=Scott&numtimes=4). You can try different values for 

name

 and 

numtimes

 in the URL. TheASP.NET MVC model binding system automatically maps the named parameters from the query string in the address bar to parameters in your method.

In the sample above, the URL segment (

Parameters

) is not used, the

name

and

numTimes

parameters are passed as query strings. The ? (question mark) in the above URL is a separator, and the query strings follow. The & character separates query strings.Replace the Welcomemethod with the following code:public string Welcome(string name, int ID = 1)
{
    return HttpUtility.HtmlEncode("Hello " + name+ ", ID: " + ID);
}Run the application and enter the following URL:  http://localhost:xxx/HelloWorld/Welcome/3?name=Rick

This time the third URL segment matched the route parameter

ID.

The 

Welcome

action method cpntains a parameter (

ID

) that matched the URL specification in the

RegisterRoutes

method.public static void RegisterRoutes(RouteCollection routes)
{
    routes.IgnoreRoute("{resource}.axd/{*pathInfo}");

    routes.MapRoute(
        name: "Default",
        url: "{controller}/{action}/{id}",
        defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
    );
}In ASP.NET MVC applications, it's more typical to pass in parameters as route data (like we did with ID above) than passing them as query strings. You could also add a route to pass both the

name

 and 

numtimes

 in parameters as route data in the URL. In the App_Start\RouteConfig.cs file, add the "Hello" route:public class RouteConfig
{
   public static void RegisterRoutes(RouteCollection routes)
   {
      routes.IgnoreRoute("{resource}.axd/{*pathInfo}");

      routes.MapRoute(
          name: "Default",
          url: "{controller}/{action}/{id}",
          defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
      );

      routes.MapRoute(
           name: "Hello",
           url: "{controller}/{action}/{name}/{id}"
       );
   }
}Run the application and browse to

/localhost:XXX/HelloWorld/Welcome/Scott/3

.


For many MVC applications, the default route works fine. You'll learn laterin this tutorial to pass data using the model binder, and you won't have to modify the default route for that.In these examples the controller has been doing the "VC" portion of MVC — that is, the view and controller work. The controller is returning HTML directly. Ordinarily you don't want controllers returning HTML directly, since that becomes very cumbersome to code. Instead we'll typically use a separate view template file to help generate the HTML response. Let's look next at how we can do this.