如何安装配置IBM存储多路径软件

如何安装配置IBM存储多路径软件 在安装多路径软件之前需要确认系统版本及内核版本，根据系统的版本号与内核版本号下载对应版本的多路径软件安装设置。www.lsi.com/rdac站点可以下载到DS3000、DS4000 、 DS5000系统存储多路径软件。以下为DS5020存储为例进行配置，操作系统为RHEL5.6。

1.安装配置

1）、下载软件
查看系统内核版本
[root@jason1~]# uname -a
Linuxjason1 2.6.18-238.el5 #1 SMP Sun Dec 19 14:22:44EST 2010 x86_64 x86_64 x86_64 GNU/Linux
[root@jason1~]#
知道了系统内核版本可以登录www.lsi.com/rdac站点下载对应内核版本的多路径软件（DS5020、DS5040同属DS5000系列，可以下载DS5000系列版本多路径软件）。

上图可以看到对应的内核2.6.18-238.el5版本的多路径软件为09.03.0C05.0504版本

下载rdac-LINUX-09.03.0C05.0504-source.tar.gz。
譬如当前系统连接存储DS5020划有3个LUN。在没有安装多路径软件之前fdisk –l可以看到如下信息：
[root@jason1~]#fdisk -l

Disk/dev/sda: 298.9 GB, 298999349248 bytes
255heads, 63 sectors/track, 36351 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 274 2096482+ 82 Linux swap / Solaris
/dev/sda3 275 36351 289788502+ 83 Linux

Disk/dev/sdb: 536.8 GB, 536870912000 bytes
255heads, 63 sectors/track, 65270 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Disk/dev/sdb doesn't contain a valid partition table

Disk/dev/sdd: 536.8 GB, 536870912000 bytes
255heads, 63 sectors/track, 65270 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Disk/dev/sdd doesn't contain a valid partition table

Disk/dev/sdj: 1861.4 GB, 1861481775616 bytes
255heads, 63 sectors/track, 226312 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Disk/dev/sdj doesn't contain a valid partition table

Disk/dev/sdk: 4998.3 GB, 4998330467328 bytes
255heads, 63 sectors/track, 607679 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Disk/dev/sdk doesn't contain a valid partition table

Disk/dev/sdl: 1861.4 GB, 1861481775616 bytes
255heads, 63 sectors/track, 226312 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Disk/dev/sdl doesn't contain a valid partition table

Disk/dev/sdm: 4998.3 GB, 4998330467328 bytes
255heads, 63 sectors/track, 607679 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Disk/dev/sdm doesn't contain a valid partition table
[root@jason1~]#

2)、编译安装
编译安装rdac-LINUX-09.03.0C05.0504-source.tar.gz
[root@JASON1mnt]#tar zxvf rdac-LINUX-09.03.0C05.0504-source.tar.gz
[root@JASON1mnt]#cd linuxrdac-09.03.0C05.0504/
[root@JASON1linuxrdac-09.03.0C05.0504]# make install
make[1]: Entering directory`/usr/src/kernels/2.6.18-238.el5-x86_64'
CC [M] /mnt/linuxrdac-09.03.0C05.0504/MPP_hba.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppLnx26p_upper.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppLnx26p_sysdep.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppCmn_s2tos3.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppCmn_SysInterface.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppLnx26p_vhbamisc.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppLnx26p_vhbatask.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppLnx26p_vhba.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppLnx26p_vhbaproc.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppLnx26p_vhbalib.o
CC [M] /mnt/linuxrdac-09.03.0C05.0504/mppLnx26p_vhbaio.o
LD [M] /mnt/linuxrdac-09.03.0C05.0504/mppUpper.o
LD [M] /mnt/linuxrdac-09.03.0C05.0504/mppVhba.o
Building modules, stage 2.
MODPOST
CC /mnt/linuxrdac-09.03.0C05.0504/mppUpper.mod.o
LD [M] /mnt/linuxrdac-09.03.0C05.0504/mppUpper.ko
CC /mnt/linuxrdac-09.03.0C05.0504/mppVhba.mod.o
LD [M] /mnt/linuxrdac-09.03.0C05.0504/mppVhba.ko
make[1]:Leaving directory `/usr/src/kernels/2.6.18-238.el5-x86_64'
make[1]:Entering directory `/usr/src/kernels/2.6.18-238.el5-x86_64'
Building modules, stage 2.
MODPOST
make[1]:Leaving directory `/usr/src/kernels/2.6.18-238.el5-x86_64'
gcc -I/mnt/linuxrdac-09.03.0C05.0504-I/mnt/linuxrdac-09.03.0C05.0504/mpp_linux_headers/-I/mnt/linuxrdac-09.03.0C05.0504/mpp_linux_sys_headers/-c ./utility/mppUtil.c -o mppUtil.o
/bin/bash./genfileattributes bld
gcc -I/mnt/linuxrdac-09.03.0C05.0504-I/mnt/linuxrdac-09.03.0C05.0504/mpp_linux_headers/-I/mnt/linuxrdac-09.03.0C05.0504/mpp_linux_sys_headers/-c ./utility/mppUtil26p_sysdep.c -o mppUtilSysdep.o
gccmppUtil.o mppUtilSysdep.o -o mppUtil
gcc-o genuniqueid genuniqueid.c
CheckingHost Adapter Configuration...
Detected2 Emulex Host Adapter Port(s) on the system
Detected1 LSI Host Adapter Port(s) on the system
HostAdapters from different supported vendors co-exists on your system.
Pleasewait while we modify the system configuration files.
Yourkernel version is 2.6.18-238.el5
Preparingto install MPP driver against this kernel version...
Generatingmodule dependencies...
Creatingnew MPP initrd image...
You must now edit your boot loaderconfiguration file, /boot/grub/menu.lst, to
add a new boot menu, which uses mpp-2.6.18-238.el5.imgas the initrd image.
Now Reboot the system for MPP to takeeffect.
The new boot menu entry should looksomething like this (note that it may
vary with different systemconfiguration):

...

title Red Hat Linux (2.6.18-238.el5)with MPP support
root (hd0,5)
kernel /vmlinuz-2.6.18-238.el5ro root=LABEL=RH9
initrd /mpp-2.6.18-238.el5.img
...
MPPdriver package has been successfully installed on your system.
[root@JASON1linuxrdac-09.03.0C05.0504]#
3)、配置grub

按照以上提示修改grub.conf文件，修改前grub.conf文件如下：
[root@JASON1 grub]# vi grub.conf
#grub.conf generated by anaconda
#
#Note that you do not have to rerun grub after making changes to this file
#NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relativeto /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version roroot=/dev/sda3
# initrd /initrd-version.img
#boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
titleRed Hat Enterprise Linux Server (2.6.18-238.el5xen)
root (hd0,0)
kernel /xen.gz-2.6.18-238.el5
module /vmlinuz-2.6.18-238.el5xenro root=LABEL=/ rhgb quiet
module /initrd-2.6.18-238.el5xen.img
titleRed Hat Enterprise Linux Server-base (2.6.18-238.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-238.el5ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.18-238.el5.img

修改后grub.conf配置文件内容如下：
[root@JASON1grub]# vi grub.conf
#grub.conf generated by anaconda
#
#Note that you do not have to rerun grub after making changes to this file
#NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths arerelative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version roroot=/dev/sda3
# initrd /initrd-version.img
#boot=/dev/sda
default=2
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
titleRed Hat Enterprise Linux Server (2.6.18-238.el5xen)
root (hd0,0)
kernel /xen.gz-2.6.18-238.el5
module /vmlinuz-2.6.18-238.el5xenro root=LABEL=/ rhgb quiet
module /initrd-2.6.18-238.el5xen.img
titleRed Hat Enterprise Linux Server-base (2.6.18-238.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-238.el5ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.18-238.el5.img
title Red Hat Linux (2.6.18-238.el5)with MPP support
root (hd0,0)
kernel/vmlinuz-2.6.18-238.el5 root=LABEL=/ rhgb quiet
initrd /mpp-2.6.18-238.el5.img

注：1、红色字体为修改内容。
2、修改grub.conf文件建议在原有文件后加入新的启动条目或修改文件之前对grub.conf进行备份。

修改成功保存之后重新启动系统，启动成功之后fdisk -l查看内容如下:
[root@jason1~]# fdisk -l
Disk/dev/sda: 298.9 GB, 298999349248 bytes
255heads, 63 sectors/track, 36351 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 274 2096482+ 82 Linux swap / Solaris
/dev/sda3 275 36351 289788502+ 83 Linux

Disk/dev/sdb: 536.8 GB, 536870912000 bytes
255heads, 63 sectors/track, 65270 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Disk/dev/sdb doesn't contain a valid partition table

Disk/dev/sdc: 1861.4 GB, 1861481775616 bytes
255heads, 63 sectors/track, 226312 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Disk/dev/sdc doesn't contain a valid partition table

Disk/dev/sdd: 4998.3 GB, 4998330467328 bytes
255heads, 63 sectors/track, 607679 cylinders
Units= cylinders of 16065 * 512 = 8225280 bytes

Disk/dev/sdd doesn't contain a valid partition table
[root@jason1~]#
备注：修改grub.conf文件前，应对grub.conf配置文件进行备份。
2.常见问题

1)、问题一
[root@jason1 linuxrdac-09.03.0C05.0504]#make install
This Version of MPP build is not supported on this Version of Redhat Kernel2.6.18-238.el5.
make: *** [kernelvercheck.REDHAT] 错误 1
[root@jason1 linuxrdac-09.03.0C05.0504]#

解决方法：
/etc/redhat-release文件设置有系统的版本号，执行makeinstall操作会读取该文件来判定是否支持本系统内核。由于在安装oracle时，修改系统版本号为4所以出现以上错误，可以修改回系统版本号为5.6（使用时根据自己系统实际版本号进行修改。）
[root@jason1 ~]# vi /etc/redhat-release
Red Hat Enterprise Linux Server release 5.6 (Tikanga)
2)、问题二
编译时报错如下：
[root@jason1 linuxrdac-09.03.0C05.0504]#make install
Kernel source is not installed
make: *** [kernelsrccheck] 错误 1
[root@jason1 linuxrdac-09.03.0C05.0504]#

解决方法：
执行make install 或make操作其实包括对该多路径软件进行编译，编译内核时需要链接Kernel source文件进行编译，所以需要安装kernel-devel-2.6.18-238.el5.x86_64.rpm
（本系统为64位系统，如果你的系统为32位请安装32为的包）
[root@jason1 mnt]# rpm -ivh kernel-devel-2.6.18-238.el5.x86_64.rpm
warning: kernel-devel-2.6.18-238.el5.x86_64.rpm:Header V3 DSA signature: NOKEY, key ID 37017186
Preparing... ########################################### [100%]
1:kernel-devel ########################################### [100%]
[root@jason1 mnt]#