fastboot using guide

1. 手机进入fastboot模式

先关机，开机时，同时按power键+camera或power + Home键，进入fastboot，红色字体
然后将手机和HOST，用USB线连接

2. 查看fastboot用法

$ sudo ./fastboot -h
usage: fastboot [ <option> ] <command>

commands:
  update <filename>                        reflash device from update.zip
  flashall                                 flash boot + recovery + system
  flash <partition> [ <filename> ]         write a file to a flash partition
  erase <partition>                        erase a flash partition
  format <partition>                       format a flash partition 
  getvar <variable>                        display a bootloader variable
  boot <kernel> [ <ramdisk> ]              download and boot kernel
  flash:raw boot <kernel> [ <ramdisk> ]    create bootimage and flash it
  devices                                  list all connected devices
  continue                                 continue with autoboot
  reboot                                   reboot device normally
  reboot-bootloader                        reboot device into bootloader
  help                                     show this help message

options:
  -w                                       erase userdata and cache (and format
                                           if supported by partition type)
  -u                                       do not first erase partition before
                                           formatting
  -s <specific device>                     specify device serial number
                                           or path to device port
  -l                                       with "devices", lists device paths
  -p <product>                             specify product name
  -c <cmdline>                             override kernel commandline
  -i <vendor id>                           specify a custom USB vendor id
  -b <base_addr>                           specify a custom kernel base address
  -n <page size>                           specify the nand page size. default: 2048
  -S <size>[K|M|G]                         automatically sparse files greater than
                                           size.  0 to disable

3. 查看进入fastboot模式的设备

$ sudo ./fastboot devices
20080823    fastboot

4. 烧写image

$ sudo ./fastboot flash partition_name img_file

一般只烧boot.img, system.img和userdata.img三个镜像

$ sudo ./fastboot flash boot boot.img
sending 'boot' (4700 KB)...
OKAY [  4.770s]
writing 'boot'...
OKAY [  1.849s]
finished. total time: 6.642s

$ sudo ./fastboot flash system system.img
sending 'system' (85090 KB)...
OKAY [ 86.732s]
writing 'system'...
OKAY [ 33.991s]
finished. total time: 120.723s

$ sudo ./fastboot flash userdata userdata.img
sending 'userdata' (1456 KB)...
OKAY [  1.485s]
writing 'userdata'...
OKAY [  1.350s]
finished. total time: 2.835s

5. QUALCOMM CONTENT

fastboot flash recovery recovery.img

fastboot devices

fastboot -w

fastboot flash boot .\boot.img

fastboot flash system   .\system.img

fastboot flash cache    .\cache.img

fastboot flash recovery .\recovery.img

fastboot flash persist  .\persist.img

fastboot flash userdata .\userdata.img

fastboot flash aboot    .\emmc_appsboot.mbn

fastboot flash sbl1 sbl1.mbn

fastboot flash recovery recovery.img

fastboot flash rpm       rpm.mbn

fastboot flash modem    NON-HLOS.bin

fastboot flash sdisdi.mbn

fastboot flash  tz tz.mbn

echo phone will restart

fastboot reboot

@pause

6. spreadtrum CONTENT

What is fastboot

Fastboot is a tool provided with Android. And it supported by our bootloader.

h ow to enter fastboot mode

Now we defined three boot mode, there are calibration, recovery, and fastboot.

You can enter fastboot by holding the HOME key( or CAMERA key ) when boot you phone up by POWER key. If enter fastboot mode success, you can get a string "fastboot_mode" on lcd in red font.

Now you can plug in a usb cable to connect you phone with Ubuntu host.

What we can do in fastboot mode（Linux）

You can find the host fastboot tool in ~/Android_Project/out/host/linux_x86/bin directory, it is named as "fastboot" too. But if you want to run it, you should be privileged as sudoer. 

1.check connected device

sudo ./fastboot devices

2.erase a nand partition

sudo ./fastboot erase Partition_Name

Now The partition names and their contents relation as follow:

2ndbl ----------- u-boot.bin 

params----------- u-boot parameters 

vmjaluna -------- vmjaluna.image 

modem ----------- modem.bin 

boot ------------ boot.img (previously it is named kernel) 

dsp ------------- dsp.bin 

fixnv ----------- nuitem.bin 

runtimenv ------- runtime nv 

recovery -------- recovery.img (it is not supported now) 

system ---------- system.img 

userdata -------- userdata.img 

boot_logo ------- boot_logo.bmp 

fastboot_logo --- fastboot_logo.bmp 

cache ----------- cache partition 

misc ------------ misc partition 

flash a partition by an binary file or image

sudo ./fastboot flash Partition_Name Flash_File

You can find the relation in the section 2.

You should erase it first before flash
reboot your phone

sudo ./fastboot reboot

If you want your phone boot up, you need press the POWER key again.
reboot into fastboot again

sudo ./fastboot reboot-bootloader

C aution:

The other commands's support still need some further development.