wireshark 如何写过滤规则
2013-08-26 16:09
381 查看
一、IP过滤:包括来源IP或者目标IP等于某个IP
比如:ip.src addr==192.168.0.208 or ip.src addr eq 192.168.0.208 显示来源IP
ip.dst addr==192.168.0.208 or ip.dst addr eq 192.168.0.208 显示目标IP
二、端口过滤:
比如:tcp.port eq 80 // 不管端口是来源的还是目标的都显示
tcp.port == 80
tcp.port eq 2722
tcp.port eq 80 or udp.port eq 80
tcp.dstport == 80 // 只显tcp协议的目标端口80
tcp.srcport == 80 // 只显tcp协议的来源端口80
过滤端口范围
tcp.port >= 1 and tcp.port <= 80
三、协议过滤:tcp
udp
arp
icmp
http
smtp
ftp
dns
msnms
ip
ssl
等等
排除ssl包,如!ssl 或者 not ssl
四、包长度过滤:
比如:
udp.length == 26 这个长度是指udp本身固定长度8加上udp下面那块数据包之和
tcp.len >= 7 指的是ip数据包(tcp下面那块数据),不包括tcp本身
ip.len == 94 除了以太网头固定长度14,其它都算是ip.len,即从ip本身到最后
frame.len == 119 整个数据包长度,从eth开始到最后
五、http模式过滤:
例子:
http.request.method == “GET”
http.request.method == “POST”
http.request.uri == “/img/logo-edu.gif”
http contains “GET”
http contains “HTTP/1.”
// GET包
http.request.method == “GET” && http contains “Host: ”
http.request.method == “GET” && http contains “User-Agent: ”
// POST包
http.request.method == “POST” && http contains “Host: ”
http.request.method == “POST” && http contains “User-Agent: ”
// 响应包
http contains “HTTP/1.1 200 OK” && http contains “Content-Type: ”
http contains “HTTP/1.0 200 OK” && http contains “Content-Type: ”
一定包含如下
Content-Type:
六、连接符 and / or
七、表达式:!(arp.src==192.168.1.1) and !(arp.dst.proto_ipv4==192.168.1.243)
比如:ip.src addr==192.168.0.208 or ip.src addr eq 192.168.0.208 显示来源IP
ip.dst addr==192.168.0.208 or ip.dst addr eq 192.168.0.208 显示目标IP
二、端口过滤:
比如:tcp.port eq 80 // 不管端口是来源的还是目标的都显示
tcp.port == 80
tcp.port eq 2722
tcp.port eq 80 or udp.port eq 80
tcp.dstport == 80 // 只显tcp协议的目标端口80
tcp.srcport == 80 // 只显tcp协议的来源端口80
过滤端口范围
tcp.port >= 1 and tcp.port <= 80
三、协议过滤:tcp
udp
arp
icmp
http
smtp
ftp
dns
msnms
ip
ssl
等等
排除ssl包,如!ssl 或者 not ssl
四、包长度过滤:
比如:
udp.length == 26 这个长度是指udp本身固定长度8加上udp下面那块数据包之和
tcp.len >= 7 指的是ip数据包(tcp下面那块数据),不包括tcp本身
ip.len == 94 除了以太网头固定长度14,其它都算是ip.len,即从ip本身到最后
frame.len == 119 整个数据包长度,从eth开始到最后
五、http模式过滤:
例子:
http.request.method == “GET”
http.request.method == “POST”
http.request.uri == “/img/logo-edu.gif”
http contains “GET”
http contains “HTTP/1.”
// GET包
http.request.method == “GET” && http contains “Host: ”
http.request.method == “GET” && http contains “User-Agent: ”
// POST包
http.request.method == “POST” && http contains “Host: ”
http.request.method == “POST” && http contains “User-Agent: ”
// 响应包
http contains “HTTP/1.1 200 OK” && http contains “Content-Type: ”
http contains “HTTP/1.0 200 OK” && http contains “Content-Type: ”
一定包含如下
Content-Type:
六、连接符 and / or
七、表达式:!(arp.src==192.168.1.1) and !(arp.dst.proto_ipv4==192.168.1.243)
相关文章推荐
- 如何使用Wireshark规则精准过滤网络包系列之 显示过滤器
- wireshark 如何写过滤规则
- 如何使用Wireshark规则精准过滤网络包系列之 显示过滤器
- wireshark 如何写过滤规则
- Wireshark过滤规则之:http数据包
- wireshark 过滤规则
- wireshark 过滤规则
- dede过滤规则-如何过滤"(1)"这种-正则表达式
- wireshark的一些过滤规则
- Wireshark过滤规则
- wireshark过滤规则
- wireshark过滤规则
- 【转】wireshark过滤规则
- Wireshark 抓包过滤规则
- wireshark过滤规则
- wireshark过滤规则
- Wireshark过滤规则
- wireshark 过滤规则
- wireshark过滤规则
- wireshark 过滤规则