VC6.0 工程改名 和 多个工程合并到一个工作空间 小技巧

前提：
为了将多个工程合并到一个工作空间，可以批量编译，每个工程必须不同名。因此要对工程改名。
但其他文件和类的名字不改变，否则要动大手术，不在本文讨论之列。
操作步骤：
（1）删除 .dsw 文件。改好了会再自动生成的。
（2）比如要把工程名由 HY 改成 CY：
打开 HY.dsp：
# Microsoft Developer Studio Project File - Name="HY" - Package Owner=<4>

# Microsoft Developer Studio Generated Build File, Format Version 6.00

# ** DO NOT EDIT **
# TARGTYPE "Win32 (x86) Application" 0x0101
CFG=HY - Win32 Debug

!MESSAGE This is not a valid makefile. To build this project using NMAKE,

!MESSAGE use the Export Makefile command and run

!MESSAGE 

!MESSAGE NMAKE /f "HY.mak".

!MESSAGE 

!MESSAGE You can specify a configuration when running NMAKE

!MESSAGE by defining the macro CFG on the command line. For example:

!MESSAGE 

!MESSAGE NMAKE /f "HY.mak" CFG="HY - Win32 Debug"

!MESSAGE 

!MESSAGE Possible choices for configuration are:

!MESSAGE 

!MESSAGE "HY - Win32 Release" (based on "Win32 (x86) Application")

!MESSAGE "HY - Win32 Debug" (based on "Win32 (x86) Application")

!MESSAGE
# Begin Project

# PROP AllowPerConfigDependencies 0

# PROP Scc_ProjName ""

# PROP Scc_LocalPath ""

CPP=cl.exe

MTL=midl.exe

RSC=rc.exe
!IF  "$(CFG)" == "HY - Win32 Release"
# PROP BASE Use_MFC 6

# PROP BASE Use_Debug_Libraries 0

# PROP BASE Output_Dir "Release"

# PROP BASE Intermediate_Dir "Release"

# PROP BASE Target_Dir ""

# PROP Use_MFC 5

# PROP Use_Debug_Libraries 0

# PROP Output_Dir "Release"

# PROP Intermediate_Dir "Release"

# PROP Ignore_Export_Lib 0

# PROP Target_Dir ""

# ADD BASE CPP /nologo /MD /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_AFXDLL" /Yu"stdafx.h" /FD /c

# ADD CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /Yu"stdafx.h" /FD /c

# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32

# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32

# ADD BASE RSC /l 0x804 /d "NDEBUG" /d "_AFXDLL"

# ADD RSC /l 0x804 /d "NDEBUG"

BSC32=bscmake.exe

# ADD BASE BSC32 /nologo

# ADD BSC32 /nologo

LINK32=link.exe

# ADD BASE LINK32 /nologo /subsystem:windows /machine:I386

# ADD LINK32 /nologo /subsystem:windows /machine:I386 /out:"Release/HY.exe"
!ELSEIF  "$(CFG)" == "HY - Win32 Debug"
# PROP BASE Use_MFC 6

# PROP BASE Use_Debug_Libraries 1

# PROP BASE Output_Dir "Debug"

# PROP BASE Intermediate_Dir "Debug"

# PROP BASE Target_Dir ""

# PROP Use_MFC 6

# PROP Use_Debug_Libraries 1

# PROP Output_Dir "Debug"

# PROP Intermediate_Dir "Debug"

# PROP Target_Dir ""

# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_AFXDLL" /Yu"stdafx.h" /FD /GZ /c

# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_AFXDLL" /D "_MBCS" /Yu"stdafx.h" /FD /GZ /c

# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32

# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32

# ADD BASE RSC /l 0x804 /d "_DEBUG" /d "_AFXDLL"

# ADD RSC /l 0x804 /d "_DEBUG" /d "_AFXDLL"

BSC32=bscmake.exe

# ADD BASE BSC32 /nologo

# ADD BSC32 /nologo

LINK32=link.exe

# ADD BASE LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept

# ADD LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
!ENDIF
# Begin Target
# Name "HY - Win32 Release"

# Name "HY - Win32 Debug"

# Begin Group "Source Files"
# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
。。。后面涉及到其他文件，不改动！
 
（3）把这些红色的HY改成CY即可，并把文件名改为
CY.dsp ：
# Microsoft Developer Studio Project File - Name="CY" - Package Owner=<4>

# Microsoft Developer Studio Generated Build File, Format Version 6.00

# ** DO NOT EDIT **
# TARGTYPE "Win32 (x86) Application" 0x0101
CFG=CY - Win32 Debug

!MESSAGE This is not a valid makefile. To build this project using NMAKE,

!MESSAGE use the Export Makefile command and run

!MESSAGE 

!MESSAGE NMAKE /f "CY.mak".

!MESSAGE 

!MESSAGE You can specify a configuration when running NMAKE

!MESSAGE by defining the macro CFG on the command line. For example:

!MESSAGE 

!MESSAGE NMAKE /f "CY.mak" CFG="CY - Win32 Debug"

!MESSAGE 

!MESSAGE Possible choices for configuration are:

!MESSAGE 

!MESSAGE "CY - Win32 Release" (based on "Win32 (x86) Application")

!MESSAGE "CY - Win32 Debug" (based on "Win32 (x86) Application")

!MESSAGE
# Begin Project

# PROP AllowPerConfigDependencies 0

# PROP Scc_ProjName ""

# PROP Scc_LocalPath ""

CPP=cl.exe

MTL=midl.exe

RSC=rc.exe
!IF  "$(CFG)" == "CY - Win32 Release"
# PROP BASE Use_MFC 6

# PROP BASE Use_Debug_Libraries 0

# PROP BASE Output_Dir "Release"

# PROP BASE Intermediate_Dir "Release"

# PROP BASE Target_Dir ""

# PROP Use_MFC 5

# PROP Use_Debug_Libraries 0

# PROP Output_Dir "Release"

# PROP Intermediate_Dir "Release"

# PROP Ignore_Export_Lib 0

# PROP Target_Dir ""

# ADD BASE CPP /nologo /MD /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_AFXDLL" /Yu"stdafx.h" /FD /c

# ADD CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /Yu"stdafx.h" /FD /c

# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32

# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32

# ADD BASE RSC /l 0x804 /d "NDEBUG" /d "_AFXDLL"

# ADD RSC /l 0x804 /d "NDEBUG"

BSC32=bscmake.exe

# ADD BASE BSC32 /nologo

# ADD BSC32 /nologo

LINK32=link.exe

# ADD BASE LINK32 /nologo /subsystem:windows /machine:I386

# ADD LINK32 /nologo /subsystem:windows /machine:I386 /out:"Release/CY.exe"
!ELSEIF  "$(CFG)" == "CY - Win32 Debug"
# PROP BASE Use_MFC 6

# PROP BASE Use_Debug_Libraries 1

# PROP BASE Output_Dir "Debug"

# PROP BASE Intermediate_Dir "Debug"

# PROP BASE Target_Dir ""

# PROP Use_MFC 6

# PROP Use_Debug_Libraries 1

# PROP Output_Dir "Debug"

# PROP Intermediate_Dir "Debug"

# PROP Ignore_Export_Lib 0

# PROP Target_Dir ""

# ADD BASE CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_AFXDLL" /Yu"stdafx.h" /FD /GZ /c

# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_AFXDLL" /Yu"stdafx.h" /FD /GZ /c

# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32

# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32

# ADD BASE RSC /l 0x804 /d "_DEBUG" /d "_AFXDLL"

# ADD RSC /l 0x804 /d "_DEBUG" /d "_AFXDLL"

BSC32=bscmake.exe

# ADD BASE BSC32 /nologo

# ADD BSC32 /nologo

LINK32=link.exe

# ADD BASE LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept

# ADD LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
!ENDIF
# Begin Target
# Name "CY - Win32 Release"

# Name "CY - Win32 Debug"

# Begin Group "Source Files"
# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"

。。。
把文件名改为 CY.dsp ，工程改名完成！
（4）重新打开CY.dsp ，编译通过，就大功告成！
（5）如果想要把多个工程合并到一个工作空间，最好新建一个工作空间，把要合并的工程插入进去就可以了。
（6）设置好编译条件，然后“批组建”就可省去过去一个一个编译的麻烦了！