android四大组件之Service
2013-06-04 15:23
495 查看
Service是android非常重要的组件之一,它运行在后台,不与用户进行交互。
java.lang.Object
|-- android.content.Context
|-- android.content.ContextWrapper
|-- android.app.Service
与Activity一样,Service也实现了ComponentCallbacks接口。
在默认情况下,Service运行在应用程序进程的主线程之中,如果需要在Service中处理一些网络连接等耗时的操作,那么应该将这些任务放在单独的线程中处理,避免阻塞用户界面。启动后的Service具有较高的优先级,一般情况下,系统会保证Service的正常运行,只有当前台的Activity正常运行的资源被Service占用的情况下,系统才会停止Service;当系统重新获得资源后,会根据程序的设置来决定是否重新启动原来的Service。
与使用Activity组件类似,使用Service组件也需要以下两个步骤:
定义一个继承Service的子类
在AndroidManifest.xml中使用<service>标签配置该Service
Service中定义了如下的生命周期方法,供开发者使用:
IBinder onBind(Intent intent):该方法是Service子类必须实现的方法,该方法返回一个IBinder对象,应用程序可通过该对象与Service组件通信
void onCreate():当Service组件第一次被创建后立即回调该方法
void onDestroy():当Service关闭之前回调该方法
void onStartCommand(Intent intent,int flags,int startId):该方法的早期版本是onStart(Intent intent,int startId),每次客户端调用startService()方法启动Service时都会回调该方法
boolean onUnbind(Intent intent):当该Service上绑定的所有客户端断开连接时将会调用该方法
当其它组件通过Context.startService()方法启动Service时,系统会创建一个Service对象,并顺序调用onCreate()方法和onStartCommand()方法,在调用Context.stopService()或stopSelf()之前,Service一直处于运行的状态。如果多次调用startService()方法,系统只会多次调用onStartCommand()方法,不会重复调用onCreate()方法。无论调用了多少次startService()方法,只需调用一次stopService()方法就可以停止该Service。Service对象在销毁之前,onDestroy()方法会被调用,因此与资源释放相关的工作应该在此方法中完成。
当程序通过startService()方法和stopService()方法启动、停止Service()时,Service与访问者之间基本上不存在太多的关联,因此Service和访问者之间也无法进行通信和数据交换。下面我们介绍另一种给启动、停止Service的方法:bindService()与unbindService()。
bindService(Intent serivce,ServiceConnection connection,int flags)方法中
第一个参数通过Intent指定要启动的Service
第二个参数用于监听访问者与Service之间的连接情况
第三个参数指定绑定时是否自动创建Service(如果Service还未创建)。该参数可指定为0(不自动创建)或BIND_AUTO_CREATE(自动创建)
可能大家会对第二个参数——ServiceConnection对象感到陌生,下面进行简单说明。
该ServiceConnection对象用于监听访问者与Service之间的连接情况,当访问者与Service之间连接成功时,将会回调ServiceConnection对象的onServiceConnected(ComponentName name,IBinder service)方法;当Service所在的进程异常终止或由于其它原因终止时,导致该Service与访问者之间断开连接时,将会回调ServiceConnection对象的onServiceDisconnected(ComponentName
name)方法(当主动调用unbindService()方法断开与Service的连接时,不会调用该回调方法)。
注意到ServiceConnection对象的onServiceConnected(ComponentName name,IBinder service)方法中有一个IBinder对象,该对象即可实现与被绑定Service之间的通信。
前面提到,开发Service类时必须提供IBinder onBind(Intent intent)方法,在绑定本地Service的情况下,onBind(Intent intent)方法所返回的IBinder对象将会传给ServiceConnection对象里的onServiceConnected(ComponentName
name,IBinder service)方法的service参数,以实现与Service进行通信。
实际上开发时常会采用继承Binder(IBinder的实现类)的方式实现自己的IBinder对象。见如下代码:
首先,我们定义一个Service类:
接下来我们定义一个Activity来绑定该Service,并在Activity中通过MyBinder对象访问Service的内部状态。
布局文件如下:
Activity类如下:
注意:不要忘记在Manifest.xml中注册该Service组件。
程序运行效果截图:
java.lang.Object
|-- android.content.Context
|-- android.content.ContextWrapper
|-- android.app.Service
与Activity一样,Service也实现了ComponentCallbacks接口。
在默认情况下,Service运行在应用程序进程的主线程之中,如果需要在Service中处理一些网络连接等耗时的操作,那么应该将这些任务放在单独的线程中处理,避免阻塞用户界面。启动后的Service具有较高的优先级,一般情况下,系统会保证Service的正常运行,只有当前台的Activity正常运行的资源被Service占用的情况下,系统才会停止Service;当系统重新获得资源后,会根据程序的设置来决定是否重新启动原来的Service。
与使用Activity组件类似,使用Service组件也需要以下两个步骤:
定义一个继承Service的子类
在AndroidManifest.xml中使用<service>标签配置该Service
Service中定义了如下的生命周期方法,供开发者使用:
IBinder onBind(Intent intent):该方法是Service子类必须实现的方法,该方法返回一个IBinder对象,应用程序可通过该对象与Service组件通信
void onCreate():当Service组件第一次被创建后立即回调该方法
void onDestroy():当Service关闭之前回调该方法
void onStartCommand(Intent intent,int flags,int startId):该方法的早期版本是onStart(Intent intent,int startId),每次客户端调用startService()方法启动Service时都会回调该方法
boolean onUnbind(Intent intent):当该Service上绑定的所有客户端断开连接时将会调用该方法
当其它组件通过Context.startService()方法启动Service时,系统会创建一个Service对象,并顺序调用onCreate()方法和onStartCommand()方法,在调用Context.stopService()或stopSelf()之前,Service一直处于运行的状态。如果多次调用startService()方法,系统只会多次调用onStartCommand()方法,不会重复调用onCreate()方法。无论调用了多少次startService()方法,只需调用一次stopService()方法就可以停止该Service。Service对象在销毁之前,onDestroy()方法会被调用,因此与资源释放相关的工作应该在此方法中完成。
当程序通过startService()方法和stopService()方法启动、停止Service()时,Service与访问者之间基本上不存在太多的关联,因此Service和访问者之间也无法进行通信和数据交换。下面我们介绍另一种给启动、停止Service的方法:bindService()与unbindService()。
bindService(Intent serivce,ServiceConnection connection,int flags)方法中
第一个参数通过Intent指定要启动的Service
第二个参数用于监听访问者与Service之间的连接情况
第三个参数指定绑定时是否自动创建Service(如果Service还未创建)。该参数可指定为0(不自动创建)或BIND_AUTO_CREATE(自动创建)
可能大家会对第二个参数——ServiceConnection对象感到陌生,下面进行简单说明。
该ServiceConnection对象用于监听访问者与Service之间的连接情况,当访问者与Service之间连接成功时,将会回调ServiceConnection对象的onServiceConnected(ComponentName name,IBinder service)方法;当Service所在的进程异常终止或由于其它原因终止时,导致该Service与访问者之间断开连接时,将会回调ServiceConnection对象的onServiceDisconnected(ComponentName
name)方法(当主动调用unbindService()方法断开与Service的连接时,不会调用该回调方法)。
注意到ServiceConnection对象的onServiceConnected(ComponentName name,IBinder service)方法中有一个IBinder对象,该对象即可实现与被绑定Service之间的通信。
前面提到,开发Service类时必须提供IBinder onBind(Intent intent)方法,在绑定本地Service的情况下,onBind(Intent intent)方法所返回的IBinder对象将会传给ServiceConnection对象里的onServiceConnected(ComponentName
name,IBinder service)方法的service参数,以实现与Service进行通信。
实际上开发时常会采用继承Binder(IBinder的实现类)的方式实现自己的IBinder对象。见如下代码:
首先,我们定义一个Service类:
public class BindService extends Service { //用count代表Service的运行状态 private int count; //标志Service是否被关闭 private boolean quit; //定义onBind()方法所返回的对象 private MyBinder binder=new MyBinder(); public class MyBinder extends Binder { public int getCount() { //获取Service的运行状态:count return count; } } @Override public IBinder onBind(Intent intent) { System.out.println("Service is Binded!"); return binder; } //Service被创建时回调该方法 @Override public void onCreate() { super.onCreate(); System.out.println("Serivce is Created!"); //启动一条新线程,动态改变count值 new Thread() { @Override public void run() { while(!quit) { try { Thread.sleep(1000); } catch (InterruptedException e) { e.printStackTrace(); } count++; } } }.start(); } //Service被关闭之前回调该方法 @Override public void onDestroy() { super.onDestroy(); this.quit=true; System.out.println("Service is Destroyed!"); } //Service断开连接时回调该方法 @Override public boolean onUnbind(Intent intent) { System.out.println("Service is Unbinder"); return true; } }
接下来我们定义一个Activity来绑定该Service,并在Activity中通过MyBinder对象访问Service的内部状态。
布局文件如下:
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent" android:orientation="vertical" tools:context=".MainActivity" > <Button android:id="@+id/bind" android:layout_width="match_parent" android:layout_height="wrap_content" android:text="绑定Service" /> <Button android:id="@+id/unbind" android:layout_width="match_parent" android:layout_height="wrap_content" android:text="解除绑定" /> <Button android:id="@+id/status" android:layout_width="match_parent" android:layout_height="wrap_content" android:text="获取Service状态" /> </LinearLayout>
Activity类如下:
public class MainActivity extends Activity { private Button bind,unbind,status; //保持所启动的Service的IBinder对象 BindService.MyBinder binder; //定义一个ServiceConnection对象 private ServiceConnection conn=new ServiceConnection() { @Override public void onServiceConnected(ComponentName name, IBinder service) { System.out.println("Service connected!"); //获取Service的onBind()方法所返回的MyBinder对象 binder=(BindService.MyBinder) service; } @Override public void onServiceDisconnected(ComponentName name) { System.out.println("Service disconnected!"); } }; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); //获取界面按钮 bind=(Button)findViewById(R.id.bind); unbind=(Button)findViewById(R.id.unbind); status=(Button)findViewById(R.id.status); //创建启动Service的Intent final Intent intent=new Intent(); intent.setClassName(this, "nku.jerry.crazyit.crazyit_22.BindService"); bind.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { //绑定指定Service bindService(intent,conn,BIND_AUTO_CREATE); } }); unbind.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { //解除绑定Service unbindService(conn); } }); status.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { //获取Service状态信息 Toast.makeText(MainActivity.this,"Service的count值为:"+binder.getCount(),Toast.LENGTH_LONG).show(); } }); } }
注意:不要忘记在Manifest.xml中注册该Service组件。
程序运行效果截图:
相关文章推荐
- android四大组件之一Service的startService()与bindService()区别?
- Android基础学习【历史流程重走】 ---- 四大组件之Service
- Android 四大组件之Service
- android 四大组件之service学习总结(二)
- Android四大组件之二:Service
- Android学习笔记39:Android四大组件之Service
- Android 技术专题Feature系列第一篇 四大组件之Service
- Android四大组件---Service
- Android四大组件之service
- Android 四大组件学习之Service二
- Android四大组件——Service后台服务、前台服务、IntentService、跨进程服务、无障碍服务、系统服务
- Android 四大组件学习之Service六
- Android学习笔记(2)————Android四大组件之二(Service )
- Android 编程下的四大组件之服务(Service)
- Android四大组件之Service
- android开发步步为营之37:四大组件之Service(上)通过startService(intent)启动
- Android四大组件之Service
- Android四大组件------Service(远程服务AIDL的使用)
- 【Android基础入门〖4〗】四大组件之Service
- 关于Android四大组件之一Service