Android如何引用其他工程
2013-05-21 16:55
274 查看
Referencing a library project
If you are developing an application and want to include the shared code or resources from a library project, you can do so easily by adding a reference to the library project in the application project's Properties.To add a reference to a library project, follow these steps:
In the Package Explorer, right-click the dependent project and select Properties.
In the Properties window, select the "Android" properties group at left and locate the Library properties at right.
Click Add to open the Project Selection dialog.
From the list of available library projects, select a project and click OK.
When the dialog closes, click Apply in the Properties window.
Click OK to close the Properties window.
As soon as the Properties dialog closes, Eclipse rebuilds the project, including the contents of the library project.
Figure 2 shows the Properties dialog that lets you add library references and move them up and down in priority.
Figure 2. Adding a reference to a library project in the properties of an application project.
If you are adding references to multiple libraries, note that you can set their relative priority (and merge order) by selecting a library and using the Up and Down controls. The tools merge the referenced libraries with your
application starting from lowest priority (bottom of the list) to highest (top of the list). If more than one library defines the same resource ID, the tools select the resource from the library with higher priority. The application itself has highest priority
and its resources are always used in preference to identical resource IDs defined in libraries.
Declaring library components in the the manifest file
In the manifest file of the application project, you must add declarations of all components that the application will use that are imported from a library project. For example, you must declare any <activity>,
<service>,
<receiver>,
<provider>,
and so on, as well as
<permission>,
<uses-library>, and similar elements.
Declarations should reference the library components by their fully-qualified package names, where appropriate.
For example, the TicTacToeMain example application declares the library Activity
GameActivitylike
this:
<manifest> ... <application> ... <activity android:name="com.example.android.tictactoe.library.GameActivity" /> ... </application> </manifest>
按如下方法设置:
1. 假设要引用的android工程叫LibProject,引入到的工程叫MainProject;
2. 设置LibProject,右键->Properties->Android,将Is library项选中,然后Apply;
3. 设置MainProject,右键->->Properties->Android, 在Library中,点击Add按钮,将LibProject工程加入,Apply即可。
设置完成后,在MainProject工程中能看到LibProject的代码等资源都已经引入进来。
转载地址:http://blog.csdn.net/johnnywsd/article/details/6845451
相关文章推荐
- ****Android如何引用其他工程
- Android如何引用其他工程
- Android如何引用其他工程
- Android如何引用其他工程
- 在android中如何引用其他工程
- android如何引用其他工程
- JSF工程如何在开发时引用其他工程进行调试
- android studio生成aar包并在其他工程引用aar包
- 如何把多个android project打包成一个apk(你的项目如何引用其他项目)
- Android工程引用其他项目
- android studio生成aar包并在其他工程引用aar包
- android 项目库的 使用(引用其他工程)
- Android项目中引用到其他工程
- 「iOS」如何在一个工程里引用其他工程
- 安卓学习笔记--Android Studio生成aar包并在其他工程引用aar包
- android studio生成aar包并在其他工程引用aar包
- 原始XML文件如何引用Android项目中的其他资源
- Android项目中引用到其他工程
- Android 工程引用其他Library工程时的R.id问题
- eclipse Android 工程在Libs导入第三方jar / Android工程作为library为其他工程提供引用