STM32F10x 学习笔记6（USART实现串口通讯 2）
2013-05-05 12:00
435 查看
这次讲讲利用串口收发中断来进行串口通讯。STM32 上为每个串口分配了一个中断。也就是说无论是发送完成还是收到数据或是数据溢出都产生同一个中断。程序需在中断处理函数中读取状态寄存器(USART_SR)来判断当前的是什么中断。下面的中断映像图给出了这些中断源是如何汇合成最终的中断信号的。图中也给出了如何控制每一个单独的中断源是否起作用。
另外，Cortex-M3 内核中还有个NVIC，可以控制这里的中断信号是否触发中断处理函数的执行，还有这些外部中断的级别。关于NVIC 可以参考《ARM CortexM3 权威指南》，里面讲解的非常详细。
简单的说，为了开启中断，我们需要如下的代码：
这里多说一句，串口的发送中断有两个，分别是：
l发送数据寄存器空中断（TXE）
l发送完成中断（TC）
一般来说我们会使用发送数据寄存器空中断，用这个中断发送的效率会高一些。
中断处理函数的框架如下，如果检测到错误就清除错误，收到数了就处理。发完当前数据了就发下一个。
下面给一个利用环形缓冲区的串口驱动程序。
下面给个例子主程序，来演示如何使用上面的串口驱动代码。
另外，Cortex-M3 内核中还有个NVIC，可以控制这里的中断信号是否触发中断处理函数的执行，还有这些外部中断的级别。关于NVIC 可以参考《ARM CortexM3 权威指南》，里面讲解的非常详细。
简单的说，为了开启中断，我们需要如下的代码：
NVIC_InitTypeDef NVIC_InitStructure; NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); //开启接收中断 USART_ITConfig(USART1, USART_IT_TXE, ENABLE); // 开启发送中断
这里多说一句，串口的发送中断有两个，分别是：
l发送数据寄存器空中断（TXE）
l发送完成中断（TC）
一般来说我们会使用发送数据寄存器空中断，用这个中断发送的效率会高一些。
中断处理函数的框架如下，如果检测到错误就清除错误，收到数了就处理。发完当前数据了就发下一个。
void USART1_IRQHandler(void)
{
unsigned int data;
if(USART1->SR & 0x0F)
{
// See if we have some kind of error, Clear interrupt
data = USART1->DR;
}
else if(USART1->SR & USART_FLAG_RXNE) //Receive Data Reg Full Flag
{
data = USART1->DR;
// 对收到的数据进行处理，或者干些其他的事
}
else if(USART1->SR & USART_FLAG_TXE)
{
{ // 可以发送数据了，如果没有数据需要发送，就在这里关闭发送中断
USART1->DR = something; // Yes, Send character
}
}
}下面给一个利用环形缓冲区的串口驱动程序。
#ifndef _COM_BUFFERED_H_ #define _COM_BUFFERED_H_ #define COM1 0 #define COM2 1 #define COM_RX_BUF_SIZE 64 /* Number of characters in Rx ring buffer */ #define COM_TX_BUF_SIZE 64 /* Number of characters in Tx ring buffer */ #define COM_NO_ERR 0 /* Function call was successful */ #define COM_BAD_CH 1 /* Invalid communications port channel */ #define COM_RX_EMPTY 2 /* Rx buffer is empty, no character available */ #define COM_TX_FULL 3 /* Tx buffer is full, could not deposit character */ #define COM_TX_EMPTY 4 /* If the Tx buffer is empty. */ /************************************************************ * function : COMGetCharB * parameter: char port, port can be COM1 / COM2 * parameter: char* err is a pointer to where an error code will be placed: * *err is set to COM_NO_ERR if a character is available * *err is set to COM_RX_EMPTY if the Rx buffer is empty * *err is set to COM_BAD_CH if you have specified an invalid channel * return : char * usage : This function is called by your application to obtain a character from the communications * channel. * changelog: *************************************************************/ unsigned char COMGetCharB (unsigned char ch, unsigned char *err); /************************************************************ * function : COMPutCharB * parameter: char port, port can be COM1 / COM2 * return : COMM_NO_ERR if the function was successful (the buffer was not full) * COMM_TX_FULL if the buffer was full * COMM_BAD_CH if you have specified an incorrect channel * usage : This function is called by your application to send a character on the communications * channel. The character to send is first inserted into the Tx buffer and will be sent by * the Tx ISR. If this is the first character placed into the buffer, the Tx ISR will be * enabled. If the Tx buffer is full, the character will not be sent (i.e. it will be lost) * changelog: *************************************************************/ unsigned char COMPutCharB (unsigned char port, unsigned char c); /************************************************************ * function : COMBufferInit * parameter: * return : * usage : This function is called by your application to initialize the communications module. You * must call this function before calling any other functions. * changelog: *************************************************************/ void COMBufferInit (void); /************************************************************ * function : COMBufferIsEmpty * parameter: char port, port can be COM1 / COM2 * return : char * usage : This function is called by your application to see * if any character is available from the communications channel. * If at least one character is available, the function returns * FALSE(0) otherwise, the function returns TRUE(1). * changelog: *************************************************************/ unsigned char COMBufferIsEmpty (unsigned char port); /************************************************************ * function : COMBufferIsFull * parameter: char port, port can be COM1 / COM2 * return : char * usage : This function is called by your application to see if any more characters can be placed * in the Tx buffer. In other words, this function check to see if the Tx buffer is full. * If the buffer is full, the function returns TRUE otherwise, the function returns FALSE. * changelog: *************************************************************/ unsigned char COMBufferIsFull (unsigned char port); #endif
/*
* file: com_buffered.c
* author: Li Yuan
* platform: STM32F107
* date: 2013-5-5
* version: 0.0.1
* description: UART Ring Buffer
**/
#include "stm32f10x_usart.h"
#include "com_buffered.h"
#define OS_ENTER_CRITICAL() __set_PRIMASK(1)
#define OS_EXIT_CRITICAL() __set_PRIMASK(0)
/**
* Enables Transmiter interrupt.
**/
static void COMEnableTxInt(unsigned char port)
{
static USART_TypeDef* map[2] = {USART1, USART2};
USART_ITConfig(map[port], USART_IT_TXE, ENABLE);
}
/*
*********************************************************************************************************
* DATA TYPES
*********************************************************************************************************
*/
typedef struct {
short RingBufRxCtr; /* Number of characters in the Rx ring buffer */
unsigned char *RingBufRxInPtr; /* Pointer to where next character will be inserted */
unsigned char *RingBufRxOutPtr; /* Pointer from where next character will be extracted */
unsigned char RingBufRx[COM_RX_BUF_SIZE]; /* Ring buffer character storage (Rx) */
short RingBufTxCtr; /* Number of characters in the Tx ring buffer */
unsigned char *RingBufTxInPtr; /* Pointer to where next character will be inserted */
unsigned char *RingBufTxOutPtr; /* Pointer from where next character will be extracted */
unsigned char RingBufTx[COM_TX_BUF_SIZE]; /* Ring buffer character storage (Tx) */
} COM_RING_BUF;
/*
*********************************************************************************************************
* GLOBAL VARIABLES
*********************************************************************************************************
*/
COM_RING_BUF COM1Buf;
COM_RING_BUF COM2Buf;
/************************************************************
* function : COMGetCharB
* parameter: char port, port can be COM1 / COM2
* parameter: char* err is a pointer to where an error code will be placed:
* *err is set to COM_NO_ERR if a character is available
* *err is set to COM_RX_EMPTY if the Rx buffer is empty
* *err is set to COM_BAD_CH if you have specified an invalid channel
* return : char
* usage : This function is called by your application to obtain a character from the communications
* channel.
* changelog:
*************************************************************/
unsigned char COMGetCharB (unsigned char port, unsigned char *err)
{
// unsigned char cpu_sr;
unsigned char c;
COM_RING_BUF *pbuf;
switch (port)
{ /* Obtain pointer to communications channel */
case COM1:
pbuf = &COM1Buf;
break;
case COM2:
pbuf = &COM2Buf;
break;
default:
*err = COM_BAD_CH;
return (0);
}
OS_ENTER_CRITICAL();
if (pbuf->RingBufRxCtr > 0) /* See if buffer is empty */
{
pbuf->RingBufRxCtr--; /* No, decrement character count */
c = *pbuf->RingBufRxOutPtr++; /* Get character from buffer */
if (pbuf->RingBufRxOutPtr == &pbuf->RingBufRx[COM_RX_BUF_SIZE])
{
pbuf->RingBufRxOutPtr = &pbuf->RingBufRx[0]; /* Wrap OUT pointer */
}
OS_EXIT_CRITICAL();
*err = COM_NO_ERR;
return (c);
} else {
OS_EXIT_CRITICAL();
*err = COM_RX_EMPTY;
c = 0; /* Buffer is empty, return 0 */
return (c);
}
}
/************************************************************
* function : COMPutCharB
* parameter: char port, port can be COM1 / COM2
* return : COMM_NO_ERR if the function was successful (the buffer was not full)
* COMM_TX_FULL if the buffer was full
* COMM_BAD_CH if you have specified an incorrect channel
* usage : This function is called by your application to send a character on the communications
* channel. The character to send is first inserted into the Tx buffer and will be sent by
* the Tx ISR. If this is the first character placed into the buffer, the Tx ISR will be
* enabled. If the Tx buffer is full, the character will not be sent (i.e. it will be lost)
* changelog:
* 1.first implimented by liyuan 2010.11.5
*************************************************************/
unsigned char COMPutCharB (unsigned char port, unsigned char c)
{
// unsigned char cpu_sr;
COM_RING_BUF *pbuf;
switch (port)
{ /* Obtain pointer to communications channel */
case COM1:
pbuf = &COM1Buf;
break;
case COM2:
pbuf = &COM2Buf;
break;
default:
return (COM_BAD_CH);
}
OS_ENTER_CRITICAL();
if (pbuf->RingBufTxCtr < COM_TX_BUF_SIZE) { /* See if buffer is full */
pbuf->RingBufTxCtr++; /* No, increment character count */
*pbuf->RingBufTxInPtr++ = c; /* Put character into buffer */
if (pbuf->RingBufTxInPtr == &pbuf->RingBufTx[COM_TX_BUF_SIZE]) { /* Wrap IN pointer */
pbuf->RingBufTxInPtr = &pbuf->RingBufTx[0];
}
if (pbuf->RingBufTxCtr == 1) { /* See if this is the first character */
COMEnableTxInt(port); /* Yes, Enable Tx interrupts */
OS_EXIT_CRITICAL();
} else {
OS_EXIT_CRITICAL();
}
return (COM_NO_ERR);
} else {
OS_EXIT_CRITICAL();
return (COM_TX_FULL);
}
}
/************************************************************
* function : COMBufferInit
* parameter:
* return :
* usage : This function is called by your application to initialize the communications module. You
* must call this function before calling any other functions.
* changelog:
*************************************************************/
void COMBufferInit (void)
{
COM_RING_BUF *pbuf;
pbuf = &COM1Buf; /* Initialize the ring buffer for COM0 */
pbuf->RingBufRxCtr = 0;
pbuf->RingBufRxInPtr = &pbuf->RingBufRx[0];
pbuf->RingBufRxOutPtr = &pbuf->RingBufRx[0];
pbuf->RingBufTxCtr = 0;
pbuf->RingBufTxInPtr = &pbuf->RingBufTx[0];
pbuf->RingBufTxOutPtr = &pbuf->RingBufTx[0];
pbuf = &COM2Buf; /* Initialize the ring buffer for COM1 */
pbuf->RingBufRxCtr = 0;
pbuf->RingBufRxInPtr = &pbuf->RingBufRx[0];
pbuf->RingBufRxOutPtr = &pbuf->RingBufRx[0];
pbuf->RingBufTxCtr = 0;
pbuf->RingBufTxInPtr = &pbuf->RingBufTx[0];
pbuf->RingBufTxOutPtr = &pbuf->RingBufTx[0];
}
/************************************************************
* function : COMBufferIsEmpty
* parameter: char port, port can be COM1 / COM2
* return : char
* usage : This function is called by your application to see
* if any character is available from the communications channel.
* If at least one character is available, the function returns
* FALSE(0) otherwise, the function returns TRUE(1).
* changelog:
*************************************************************/
unsigned char COMBufferIsEmpty (unsigned char port)
{
// unsigned char cpu_sr;
unsigned char empty;
COM_RING_BUF *pbuf;
switch (port)
{ /* Obtain pointer to communications channel */
case COM1:
pbuf = &COM1Buf;
break;
case COM2:
pbuf = &COM2Buf;
break;
default:
return (1);
}
OS_ENTER_CRITICAL();
if (pbuf->RingBufRxCtr > 0)
{ /* See if buffer is empty */
empty = 0; /* Buffer is NOT empty */
}
else
{
empty = 1; /* Buffer is empty */
}
OS_EXIT_CRITICAL();
return (empty);
}
/************************************************************
* function : COMBufferIsFull
* parameter: char port, port can be COM1 / COM2
* return : char
* usage : This function is called by your application to see if any more characters can be placed
* in the Tx buffer. In other words, this function check to see if the Tx buffer is full.
* If the buffer is full, the function returns TRUE otherwise, the function returns FALSE.
* changelog:
*************************************************************/
unsigned char COMBufferIsFull (unsigned char port)
{
// unsigned char cpu_sr;
char full;
COM_RING_BUF *pbuf;
switch (port)
{ /* Obtain pointer to communications channel */
case COM1:
pbuf = &COM1Buf;
break;
case COM2:
pbuf = &COM2Buf;
break;
default:
return (1);
}
OS_ENTER_CRITICAL();
if (pbuf->RingBufTxCtr < COM_TX_BUF_SIZE) { /* See if buffer is full */
full = 0; /* Buffer is NOT full */
} else {
full = 1; /* Buffer is full */
}
OS_EXIT_CRITICAL();
return (full);
}
// This function is called by the Rx ISR to insert a character into the receive ring buffer.
static void COMPutRxChar (unsigned char port, unsigned char c)
{
COM_RING_BUF *pbuf;
switch (port)
{ /* Obtain pointer to communications channel */
case COM1:
pbuf = &COM1Buf;
break;
case COM2:
pbuf = &COM2Buf;
break;
default:
return;
}
if (pbuf->RingBufRxCtr < COM_RX_BUF_SIZE) { /* See if buffer is full */
pbuf->RingBufRxCtr++; /* No, increment character count */
*pbuf->RingBufRxInPtr++ = c; /* Put character into buffer */
if (pbuf->RingBufRxInPtr == &pbuf->RingBufRx[COM_RX_BUF_SIZE]) { /* Wrap IN pointer */
pbuf->RingBufRxInPtr = &pbuf->RingBufRx[0];
}
}
}
// This function is called by the Tx ISR to extract the next character from the Tx buffer.
// The function returns FALSE if the buffer is empty after the character is extracted from
// the buffer. This is done to signal the Tx ISR to disable interrupts because this is the
// last character to send.
static unsigned char COMGetTxChar (unsigned char port, unsigned char *err)
{
unsigned char c;
COM_RING_BUF *pbuf;
switch (port)
{ /* Obtain pointer to communications channel */
case COM1:
pbuf = &COM1Buf;
break;
case COM2:
pbuf = &COM2Buf;
break;
default:
*err = COM_BAD_CH;
return (0);
}
if (pbuf->RingBufTxCtr > 0) { /* See if buffer is empty */
pbuf->RingBufTxCtr--; /* No, decrement character count */
c = *pbuf->RingBufTxOutPtr++; /* Get character from buffer */
if (pbuf->RingBufTxOutPtr == &pbuf->RingBufTx[COM_TX_BUF_SIZE])
{
pbuf->RingBufTxOutPtr = &pbuf->RingBufTx[0]; /* Wrap OUT pointer */
}
*err = COM_NO_ERR;
return (c); /* Characters are still available */
} else {
*err = COM_TX_EMPTY;
return (0); /* Buffer is empty */
}
}
void USART1_IRQHandler(void)
{
unsigned int data;
unsigned char err;
if(USART1->SR & 0x0F)
{
// See if we have some kind of error
// Clear interrupt (do nothing about it!)
data = USART1->DR;
}
else if(USART1->SR & USART_FLAG_RXNE) //Receive Data Reg Full Flag
{
data = USART1->DR;
COMPutRxChar(COM1, data); // Insert received character into buffer
}
else if(USART1->SR & USART_FLAG_TXE)
{
data = COMGetTxChar(COM1, &err); // Get next character to send.
if (err == COM_TX_EMPTY)
{ // Do we have anymore characters to send ?
// No, Disable Tx interrupts
//USART_ITConfig(USART1, USART_IT_TXE| USART_IT_TC, ENABLE);
USART1->CR1 &= ~USART_FLAG_TXE | USART_FLAG_TC;
}
else
{
USART1->DR = data; // Yes, Send character
}
}
}
void USART2_IRQHandler(void)
{
unsigned int data;
unsigned char err;
if(USART2->SR & 0x0F)
{
// See if we have some kind of error
// Clear interrupt (do nothing about it!)
data = USART2->DR;
}
else if(USART2->SR & USART_FLAG_RXNE) //Receive Data Reg Full Flag
{
data = USART2->DR;
COMPutRxChar(COM2, data); // Insert received character into buffer
}
else if(USART2->SR & USART_FLAG_TXE)
{
data = COMGetTxChar(COM2, &err); // Get next character to send.
if (err == COM_TX_EMPTY)
{ // Do we have anymore characters to send ?
// No, Disable Tx interrupts
//USART_ITConfig(USART2, USART_IT_TXE| USART_IT_TC, ENABLE);
USART2->CR1 &= ~USART_FLAG_TXE | USART_FLAG_TC;
}
else
{
USART2->DR = data; // Yes, Send character
}
}
}下面给个例子主程序，来演示如何使用上面的串口驱动代码。
#include "misc.h"
#include "stm32f10x.h"
#include "com_buffered.h"
void UART_PutStrB (unsigned char port, uint8_t *str)
{
while (0 != *str)
{
COMPutCharB(port, *str);
str++;
}
}
void USART1_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1, ENABLE);
/* Configure USART Tx as alternate function push-pull */
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
/* Configure USART Rx as input floating */
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_Init(GPIOA, &GPIO_InitStructure);
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure );
USART_Cmd(USART1, ENABLE);
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
}
void USART2_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD | RCC_APB2Periph_AFIO, ENABLE);
/* Configure USART Tx as alternate function push-pull */
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOD, &GPIO_InitStructure);
/* Configure USART Rx as input floating */
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
GPIO_Init(GPIOD, &GPIO_InitStructure);
GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART2, &USART_InitStructure );
USART_Cmd(USART2, ENABLE);
NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
}
int main(void)
{
unsigned char c;
unsigned char err;
USART1_Init();
USART2_Init();
COMBufferInit();
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
UART_PutStrB(COM1, "Hello World!\n");
for(;;)
{
c = COMGetCharB(COM1, &err);
if(err == COM_NO_ERR)
{
COMPutCharB(COM1, c);
}
}
}
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- STM32F10x 学习笔记8（USART实现串口通讯 DMA 方式）
- STM32F10x 学习笔记之USART实现串口通讯 DMA 方式
- STM32F10x 学习笔记7（USART实现串口通讯 3）
- STM32F10x 学习笔记之USART实现串口通讯
- STM32F10x 学习笔记7（USART实现串口通讯 3）
- STM32F10x 学习笔记6（USART实现串口通讯 2）
- STM32F10x 学习笔记5（USART实现串口通讯 1）
- STM32F10x 学习笔记5（USART实现串口通讯 1）
- STM32F10x 学习笔记8（USART实现串口通讯 DMA 方式）
- STM32F10x USART串口映射功能实现串口通讯 485初始化
- SilverLight学习笔记--使用WebClient实现通讯(一)(上传和下载字符串数据)
- SilverLight学习笔记--使用WebClient实现通讯(二)(上传和下载流数据)
- LPC11E68串口USART1学习笔记
- VB.net学习笔记之串口通讯：System.IO.Ports.SerialPort
- hz_meeting_学习笔记1_后台通讯·通用链表·结构体实现隐藏
- STM32F103C8T6学习笔记_串口USART的使用
- ROS学习笔记 （四）：使用ROS实现ARM与PC之间的通讯
- 通过串口实现stm32的IAP功能————stm32学习笔记
- STM32学习笔记——USART串口（向原子哥和火哥学习）
- SilverLight学习笔记--使用WebClient实现通讯(一)(上传和下载字符串数据)