[c错误解决]NiosII9.0 build 时出现：No CFI table found at address 0x00C00000

#
# This file was automatically generated by the Nios II IDE Flash Programmer.
#
# It will be overwritten when the flash programmer options change.
#

cd E:/QuartusIIexercise/niosIIprj/software/hello_world/Debug

# Creating .flash file for the FPGA configuration
"$SOPC_KIT_NIOS2/bin/sof2flash" --offset=0x0 --input="E:/QuartusIIexercise/niosI
Iprj/hello.sof" --output="hello.flash"
Info: *******************************************************************
Info: Running Quartus II Convert_programming_file
Info: Command: quartus_cpf --no_banner --convert E:/QuartusIIexercise/niosIIprj/
hello.sof hello.rbf
Info: Quartus II Convert_programming_file was successful. 0 errors, 0 warnings
Info: Peak virtual memory: 57 megabytes
Info: Processing ended: Mon Feb 25 21:51:49 2013
Info: Elapsed time: 00:00:13
Info: Total CPU time (on all processors): 00:00:11

# Programming flash with the FPGA configuration
"$SOPC_KIT_NIOS2/bin/nios2-flash-programmer" --base=0x00c00000 --cable='USB-Blas
ter [USB-0]' --sidp=0x01001000 --id=2023589088 --timestamp=1361796656 --instance
=0 "hello.flash"
Using cable "USB-Blaster [USB-0]", device 1, instance 0x00
Resetting and pausing target processor: OK
Reading System ID at address 0x01001000: verified
No CFI table found at address 0x00C00000
Leaving target processor paused

Leaving target processor paused

2. cfi flash   的硬件连接问题（22bit address 8 bit data bus）设置错误导致

Leaving target processor paused

3. 对C2H函数加速器误操作导致

Leaving target processor paused

4.对nios core 的复位引脚TRSET_n没有同KEY[0连接，但是在tcl脚本中对这一引脚进行了设定，导致了：

Leaving target processor paused

还以为终于走通NiosII建立工程的路子，可是偏偏是：cfi除了需要对address bus 和data bud进行设置必须正确之外
还要有一个时序上的设置，

这样导致自己在这一台慢慢的机器上一次又一次的进行SOPC generate ，QII的综合，NiosIDE的 build
还有可恶的NiosIIRun as Hardware
每一项都慢得要死
后悔呀

出现了问题看看无双的这个blog，详细解释了nios 中CFI flash IP的使用配置，来解决这一问题

(原創) 如何解決No CFI table found at address的錯誤訊息? (SOC) (Nios II) (DE2)