Linux下快速安装OpenVZ(参考手册)
2013-01-09 19:27
337 查看
Requirements
This guide assumes you are running recent release of Fedora Core (like FC5) or RHEL/CentOS 4. Currently, OpenVZ kernel tries to support the same hardware that Red Hat kernels support. For full hardware compatibility list, see Virtuozzo HCL.Filesystems
It is recommended to use a separate partition for container's private directories (by default /vz/private/<veid>). The reason why you should do so is that if you wish to use OpenVZ per-container disk quota, you won't be able to use usual Linux disk quotas on the same partition. Bear in mind, that per-container quota in this context includes not only pure per-container quota, but also usual Linux disk quota used in containers, not on HN.
At least try to avoid using the root partition for containers, because the root user of a container will be able to overcome the 5% disk space barrier in some situations. This way the HN root partition can be completely filled and it will break the system.
OpenVZ per-container disk quota is supported only for ext2/ext3 filesystems. So use one of these filesystems (ext3 is recommended) if you need per-container disk quota.
rpm or yum?
In case you have yum utility available on your system, you may want to use it effectively to install and update OpenVZ packages. In case you don't have yum, or don't want to use it, you can use plain old rpm. Instructions for both rpm and yum are provided below.
yum pre-setup
If you want to use yum, you should set up OpenVZ yum repository first.
Download openvz.repo file and put it to your
/etc/yum.repos.d/repository, and import OpenVZ GPG key used for signing RPM packages. This can be achieved by the following commands, as root:
wget -P /etc/yum.repos.d/ http://download.openvz.org/openvz.repo rpm --import http://download.openvz.org/RPM-GPG-Key-OpenVZ[/code] In case you can not cd to /etc/yum.repos.d, it means either yum is not installed on your system, or yum version is too old. In that case, just stick to rpm installation method.Kernel installation
Note: In case you want to recompile the kernel yourself rather than use the one provided by OpenVZ, see kernel build.
First, you need to choose what “flavor” of the kernel you want to install. Please refer to Kernel flavors for more information.
Using yum
Run the following command# yum install [o]vzkernel[-flavor]
For RHEL6 kernel branch, use vzkernel, for other branches use ovzkernel.
Note that[-flavor]is optional, and can be-smpor-enterprise. Refer to kernel flavors for more info.
Note: if you need to installx86_64kernel and yum offers to install bothx86_64andi686kernels, answerNoand specify architecture manually, like this:yum install ovzkernel.x86_64. This is fixed in newer yum versions.
Using rpm
Get the kernel binary RPM from the Download/kernel page. You only need one kernel RPM so please choose the appropriate one depending on your hardware.
Next, install the kernel RPM you chose:# rpm -ihv ovzkernel[-flavor]*.rpm
Here[-flavor]is optional, and can be-smpor-enterprise. Refer to kernel flavors for more info.
Note: rpm -U (where -U stands for upgrade) should not be used, otherwise all currently installed kernels will be uninstalled.Configuring the bootloader
In case GRUB is used as the boot loader, it will be configured automatically: lines similar to these will be added to the /boot/grub/grub.conf file:title Fedora Core (2.6.8-022stab029.1) root (hd0,0) kernel /vmlinuz-2.6.8-022stab029.1 ro root=/dev/sda5 quiet rhgb vga=0x31B initrd /initrd-2.6.8-022stab029.1.img
Change Fedora Core to OpenVZ (just for clarity reasons, so the OpenVZ kernels will not be mixed up with non-OpenVZ ones). Remove extra arguments from the kernel line, leaving only the root=... parameter. The modifed portion of /etc/grub.conf should look like this:title OpenVZ (2.6.8-022stab029.1) root (hd0,0) kernel /vmlinuz-2.6.8-022stab029.1 ro root=/dev/sda5 initrd /initrd-2.6.8-022stab029.1.imgConfiguring
Please make sure the following steps are performed before rebooting into OpenVZ kernel.
sysctl
There are a number of kernel parameters that should be set for OpenVZ to work correctly. These parameters are stored in /etc/sysctl.conf file. Here are the relevant portions of the file; please edit accordingly.# On Hardware Node we generally need # packet forwarding enabled and proxy arp disabled net.ipv4.ip_forward = 1 net.ipv6.conf.default.forwarding = 1 net.ipv6.conf.all.forwarding = 1 net.ipv4.conf.default.proxy_arp = 0 # Enables source route verification net.ipv4.conf.all.rp_filter = 1 # Enables the magic-sysrq key kernel.sysrq = 1 # We do not want all our interfaces to send redirects net.ipv4.conf.default.send_redirects = 1 net.ipv4.conf.all.send_redirects = 0
SELinux
SELinux should be disabled. To that effect, put the following line to/etc/sysconfig/selinux:SELINUX=disabled
Conntracks
Note: In OpenVZ kernels later than 2.6.8, connection tracking is enabled by default so skip this section.
In the old (2.6.8-based) OpenVZ kernels netfilter connection tracking for CT0 is disabled by default. If you have a stateful firewall enabled on the host node (it is there by default on some distributions) you should either disable it, or enable connection tracking for CT0.
To enable conntracks for CT0, add the following line to/etc/modprobe.conffile:options ip_conntrack ip_conntrack_enable_ve0=1Rebooting into OpenVZ kernel
Now reboot the machine and choose "OpenVZ" on the boot loader menu. If the OpenVZ kernel has been booted successfully, proceed to installing the user-level tools for OpenVZ.Installing the utilities
OpenVZ needs some user-level tools installed. Those are:
vzctl A utility to control OpenVZ containers (create, destroy, start, stop, set parameters etc.) vzquota A utility to manage quotas for containers. Mostly used indirectly (by vzctl).
Using yum# yum install vzctl vzquota
If on the x86_64 platform you would probably want to:# yum install vzctl.x86_64 vzquota.x86_64
Using rpm
Download the binary RPMs of these utilities from Download/utils. Install them:# rpm -Uhv vzctl*.rpm vzquota*.rpm
If rpm complains about unresolved dependencies, you'll have to satisfy them first, then repeat the installation.
When all the tools are installed, start the OpenVZ subsystem.Starting OpenVZ
As root, execute the following command:# /sbin/service vz start
This will load all the needed OpenVZ kernel modules. This script should also start all the containers marked to be auto-started on machine boot (there aren't any yet).
During the next reboot, this script should be executed automatically.Installing OS template caches
An OS template cache is a Linux distribution installed into a container and then packed into a gzipped tarball. Using such a cache, a new container can be created in a matter of minutes.
Download precreated template caches from Downloads ? Templates ? Precreated, or directly from download.openvz.org/template/precreated, or from one of the mirrors. Put those tarballs as-is (no unpacking needed) to the /vz/template/cache/ directory (for Debain, this is /var/lib/vz/template/cache/).Next steps
OpenVZ is now set up on your machine. To load OpenVZ kernel by default, edit the default line in the /boot/grub/grub.conf file to point to the OpenVZ kernel. For example, if the OpenVZ kernel is the first kernel mentioned in the file, put it as default 0. See man grub.conf for more details.
Follow on to basic operations in OpenVZ environment document.
相关文章推荐
- Linux平台oracle 11g单实例 安装部署配置 快速参考
- 嵌入式Linux图形系统快速参考手册
- 最新推出:Linux邮件服务器整合Windows 2008 R2 AD认证安装参考手册 推荐
- 嵌入式Linux图形系统(GUI)快速参考手册
- Linux平台oracle 11g单实例 + ASM存储 安装部署 快速参考
- 嵌入式Linux图形系统(GUI)快速参考手册
- Nagios 监控 Linux 服务器 运行情况 快速安装手册
- Linux服务器常用软件快速安装手册
- 嵌入式Linux图形系统(GUI)快速参考手册
- RHEL AS 3上安装Oracle10g参考手册
- Linux/MacOS 中同时安装OpenCV2和OpenCV3并快速切换
- Linux下Nginx+modsecurity安装手册
- ubuntu中安装man手册查看函数原型 分类: linux使用 2010-02-28 22:50 2453人阅读 评论(0) 收藏 举报 ubuntu语言linuxlibrarysocketsys
- linux下安装中文man手册
- Linux下快速安装部署远程连接软件SSH的简明教程
- 第二十二期 Linux安装/删除应用及快速部署http服务、FTP服务
- Apache 安装手册(Linux)
- jira4.4.1快速安装(含破解)手册
- openJWeb快速开发平台安装部署手册
- Ruby + Apache + Mysql for Linux安装入门手册