How to Completely Fix hkcmd.exe Error
2012-09-12 20:33
471 查看
"STOP hkcmd.exe" Error Message - Advanced Troubleshooting For "Stop hkcmd.exe"
Microsoft windows users often complained about the error "STOP: hkcmd.exe" appearing on their screen when they first boot their PC. hkcmd.exe error is a windows error that can wreck user’s system and valuable data stored on the system. This could have been
caused either when you install your system, or when you upgrade it. Obviously, hkcmd.exe is a catastrophic hardware error that leads to system crash as it makes your system be unable to read or process a file as required.
This error normally shows as:
STOP: 0×0000007B (parameter1, parameter2, parameter3,
parameter4)
INACCESSIBLE_BOOT_DEVICE
Reasons for appearance of hkcmd.exe
There are several reasons and situations that bring up the hkcmd.exe error. Most commonly, damaged data, virus infection, incompatible hardware, device driver issues and invalid registry key values on system are causing behind appearance of this error code.
Sometimes users may face unexpected shut down with other related error message of hkcmd.exe on their PC screen. This makes it essential that you're able to repair it in the simplest way possible.
How to solve hkcmd.exe error code:
If you are getting hkcmd.exe error or any related unwanted codes on your computer, you can rectify this error code by taking some essential steps depending upon the situation that cause the problem.
Follow below mentioned steps to figure out the problem.
If your system is under BSOD error after a sudden shutdown, simply restarting the computer is enough to make hkcmd.exe go away.
If you have recently installed any new hardware or make any changes in hard drive of your system then undo the changes. This may be one possible cause of hkcmd.exe error. The way to fix this error is to first boot into safe mode. Safe mode is a mode inside
Windows which has been designed to run without any of the software or drivers which often cause problems for your system, which has been created for occasions such as this. To load up safe mode, restart your PC and then press F8 to bring up the "Advanced Boot
Options" screen, to load it from. When you're inside Safe Mode, you should then look to update the drivers on your PC.
Though drivers are the vital components which allow Windows to successfully interact with all the hardware on your system, unfortunately, it's possible that many viruses leading your computer to take longer to load or show all sorts of errors. "Boot" viruses
are annoying infections which load up onto your PC and then try and cause all sorts of issues when your computer loads up. You should try and update the anti-virus programs on your PC to ensure this hkcmd.exe error will not come back.
Other than updating of your drivers and antivirus program, the effective solution for hkcmd.exe error is to correct any invalid registry key values. But only if you have expertise knowledge on dll and exe files you are granted the right to changes in registry
values. According to mountainous experience for users,
a reliable registry cleaner is the best way to fix any potentially damaged settings that could be causing the hkcmd.exe error. Registry cleaners are designed to scan through the "Registry" database of your computer, and fix any of the errors such as 1721
error inside it.
Microsoft windows users often complained about the error "STOP: hkcmd.exe" appearing on their screen when they first boot their PC. hkcmd.exe error is a windows error that can wreck user’s system and valuable data stored on the system. This could have been
caused either when you install your system, or when you upgrade it. Obviously, hkcmd.exe is a catastrophic hardware error that leads to system crash as it makes your system be unable to read or process a file as required.
This error normally shows as:
STOP: 0×0000007B (parameter1, parameter2, parameter3,
parameter4)
INACCESSIBLE_BOOT_DEVICE
Reasons for appearance of hkcmd.exe
There are several reasons and situations that bring up the hkcmd.exe error. Most commonly, damaged data, virus infection, incompatible hardware, device driver issues and invalid registry key values on system are causing behind appearance of this error code.
Sometimes users may face unexpected shut down with other related error message of hkcmd.exe on their PC screen. This makes it essential that you're able to repair it in the simplest way possible.
How to solve hkcmd.exe error code:
If you are getting hkcmd.exe error or any related unwanted codes on your computer, you can rectify this error code by taking some essential steps depending upon the situation that cause the problem.
Follow below mentioned steps to figure out the problem.
If your system is under BSOD error after a sudden shutdown, simply restarting the computer is enough to make hkcmd.exe go away.
If you have recently installed any new hardware or make any changes in hard drive of your system then undo the changes. This may be one possible cause of hkcmd.exe error. The way to fix this error is to first boot into safe mode. Safe mode is a mode inside
Windows which has been designed to run without any of the software or drivers which often cause problems for your system, which has been created for occasions such as this. To load up safe mode, restart your PC and then press F8 to bring up the "Advanced Boot
Options" screen, to load it from. When you're inside Safe Mode, you should then look to update the drivers on your PC.
Though drivers are the vital components which allow Windows to successfully interact with all the hardware on your system, unfortunately, it's possible that many viruses leading your computer to take longer to load or show all sorts of errors. "Boot" viruses
are annoying infections which load up onto your PC and then try and cause all sorts of issues when your computer loads up. You should try and update the anti-virus programs on your PC to ensure this hkcmd.exe error will not come back.
Other than updating of your drivers and antivirus program, the effective solution for hkcmd.exe error is to correct any invalid registry key values. But only if you have expertise knowledge on dll and exe files you are granted the right to changes in registry
values. According to mountainous experience for users,
a reliable registry cleaner is the best way to fix any potentially damaged settings that could be causing the hkcmd.exe error. Registry cleaners are designed to scan through the "Registry" database of your computer, and fix any of the errors such as 1721
error inside it.
相关文章推荐
- How to Completely Fix spoolsv.exe Error
- How to Completely Fix Windows Live Error
- How to Completely Fix wlidcli.dll Error
- How to Completely Fix privacyiconclient Error
- How to Completely Fix msvbvm60.dll Error
- How to Completely Fix updspapi.dll Error
- How to Completely Fix Runtime Error 216 Error
- How to Completely Fix framedyn.dll Error
- How to Completely Fix ieframe.dll Error
- How to Completely Fix JavaScript.dll Error
- How to Completely Fix UNIDRVUI.DLL Error
- how to fix the cwm/miui recovery status 2 error
- How To Fix Host Not Responding Error with VMware ESX, vSphere in vCenter
- HTTPS security is compromised error. How to fix?
- How to fix a "Duplicated Symbols" error on binary files
- How to Fix mmcndmgr.dll Error
- How to fix the “Cannot retrieve repository metadata (repomd.xml)” error in Fedora?
- How to fix “error while loading shared libraries: libgtk-x11-2.0.so.0″
- How to Resolve the 'Error MSB6006 tsc.exe exited with code 2' build error in Visual Studio 2015
- How To Fix “W: Failed to fetch gzip:/var/lib/apt/lists/partial/… Hash Sum mismatch” Error