EIGRP Metric计算
2012-03-25 17:32
525 查看
EIGRP一般计算为256(10 7/BW + (sum of delay)/10).
R1 s0/0 连接R2 s0/0
R2上面有lookpback 0 1.1.1.1 /24
R2(config)#router eigrp 70
R2(config-router)#network 1.1.1.0 255.255.255.0
R2(config-router)#no auto-summary
疑惑到底BW取R1 s0还是R2 s0
修改R1 s0和R2 s0 bandwitdh
用R1#sh ip eigrp topology 1.1.1.0/24 发现bandwidth取的是R1 s0的bandwidth值
delay也是一样的。
Bandwidth 沿路由路径到目的地出去接口最小带宽
delay 也是一样的。
本文出自 “CISCO学习” 博客,请务必保留此出处http://theland.blog.51cto.com/1735354/816704
R1 s0/0 连接R2 s0/0
R2上面有lookpback 0 1.1.1.1 /24
R2(config)#router eigrp 70
R2(config-router)#network 1.1.1.0 255.255.255.0
R2(config-router)#no auto-summary
疑惑到底BW取R1 s0还是R2 s0
修改R1 s0和R2 s0 bandwitdh
用R1#sh ip eigrp topology 1.1.1.0/24 发现bandwidth取的是R1 s0的bandwidth值
delay也是一样的。
Bandwidth 沿路由路径到目的地出去接口最小带宽
delay 也是一样的。
本文出自 “CISCO学习” 博客,请务必保留此出处http://theland.blog.51cto.com/1735354/816704
相关文章推荐
- EIGRP metric 计算
- EIGRP的Metric计算以及负载均衡
- EIGRP的METRIC值计算方法
- EIGRP的Metric计算以及负载均衡
- CCNP-EIGRP&OSPF重分布时开销metric值的计算过程
- EIGRP的选路以及metric的计算
- eigrp度量计算
- EIGRP度量计算
- EIGRP与OSPF中cost值的计算实例
- OSPF重分布后Metric值计算
- EIGRP度量计算
- 如何让EIGRP支持64bit的Metric
- EIGRP度量计算
- EIGRP度量计算
- EIGRP----DUAL本地计算和扩散更新计算
- EIGRP Metric的5个标准
- access-list/eigrp等 反掩码计算
- 关于OSPF NSSA区域metric计算细节 推荐
- eigrp度量计算
- 自动计算metric的工具JDepend