思科交换机中如何通过IP找到其对应的交换机端口
2012-02-08 14:33
344 查看
Data Collector Environment Description:
Primary Data Collector:
OS: Windows Server Enterprise 2003 R2 & SP2
Data Collector: B&R PVI Software 2.06.00
Historian OPC Collector: Historian 3.5
Backup Data Collector:
OS: Windows XP SP2
Data Collector: B&R PVI Software 2.06.00
Historian OPC Collector: Historian 3.5
Special Notes: these two collectors were configured as redundancy in Historian Server.
Problem description:
After the Historian OPC Collector-B service is running, the OPC Collector does not generate any file in the buffer file folder and log file folder, and Historian keeps receiving “Bad”data from collector when failover event occured.
Possible Solution:
Please check if there SIM patch is installed on both node, and if its version is the same with each other.
Primary Data Collector:
OS: Windows Server Enterprise 2003 R2 & SP2
Data Collector: B&R PVI Software 2.06.00
Historian OPC Collector: Historian 3.5
Backup Data Collector:
OS: Windows XP SP2
Data Collector: B&R PVI Software 2.06.00
Historian OPC Collector: Historian 3.5
Special Notes: these two collectors were configured as redundancy in Historian Server.
Problem description:
After the Historian OPC Collector-B service is running, the OPC Collector does not generate any file in the buffer file folder and log file folder, and Historian keeps receiving “Bad”data from collector when failover event occured.
Possible Solution:
Please check if there SIM patch is installed on both node, and if its version is the same with each other.
相关文章推荐
- 如何通过DHCP Snooping配置来实现IP+MAC+端口绑定功能
- runtime如何通过selector找到对应的IMP地址?(分别考虑类方法和实例方法)
- 根据IP地址,找到交换机上相对应的端口
- 通过IP地址获取MAC地址及其对应的交换机端口
- 如何通过类名找到对应的dex文件
- 通过IP查找交换机端口(CISCO)
- 查找某IP主机对应的交换机端口
- 根据IP地址,找到交换机上相对应的端口
- 【abap】编程时,通过结构structure中的字段,如何找到对应的透明表
- 查找某IP主机对应的交换机端口
- Linux下通过端口找到对应的程序
- 如何通过Oray(花生壳)进行域名映射本地IP和端口,应用于本地服务器访问
- 根据IP地址,找到交换机上相对应的端口
- Cisco交换机里IP和MAC地址互查,并找出对应交换机端口
- 查找某IP主机对应的交换机端口
- 华为交换机如何通过端口查看IP
- 根据IP地址,找到交换机上相对应的端口
- [MTK FP]如何通过ICON ID的value找到对应的ICON
- runtime如何通过selector找到对应的IMP地址?(分别考虑类方法和实例方法)
- 使用SNMP通过IP地址查找对应交换机端口