linux fedora14 安装后,重启不能进入图形界面,显示黑屏的解决办法
2011-04-01 09:25
621 查看
fedora14安装后,不能显示图形界面,跟同事ly折腾了好久,解决办法如下:
(1) 首先进入系统后,进入文本输入模式,a +init3;
(2) 终端进入系统后,root用户运行Xorg –configure :1,生成xorg.conf.new文件;
(3) 运行Xorg –config xorg.conf.new –retro进行测试;ctr+alt+backspace退出测试;
(4) Cp xorg.conf.new /etc/X11/xorg.conf
(5) Cd 到xorg.conf目录下,vim xorg.conf 修改里面的内容如下:
Section “Monitor0”
Identifier “Monitor0”
VendorName “Monitor Vendor”
ModelName “Monitor Model”
HorizSync 30-107
VertRefresh 48-120
EndSection
设置分辨率和色彩深度
Section “screen”
Identifier “Screen0”
Device “Card0”
ModelName “Monitor0”
Default Depth 24
SubSection “Display”
ViewPort 0 0
Depth 24
Modes “1024*768”
EndSubSection
EndSection
修改主板网卡驱动如下:将原来的驱动intel换成vesa
Driver "vesa"
(5)reboot 就能进入系统了。
附:修改过的xorg.conf文件
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "catalogue:/etc/X11/fontpath.d"
FontPath "built-ins"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "dri"
Load "dri2"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-107
VertRefresh 48-120
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024*768"
EndSubSection
EndSection
(1) 首先进入系统后,进入文本输入模式,a +init3;
(2) 终端进入系统后,root用户运行Xorg –configure :1,生成xorg.conf.new文件;
(3) 运行Xorg –config xorg.conf.new –retro进行测试;ctr+alt+backspace退出测试;
(4) Cp xorg.conf.new /etc/X11/xorg.conf
(5) Cd 到xorg.conf目录下,vim xorg.conf 修改里面的内容如下:
Section “Monitor0”
Identifier “Monitor0”
VendorName “Monitor Vendor”
ModelName “Monitor Model”
HorizSync 30-107
VertRefresh 48-120
EndSection
设置分辨率和色彩深度
Section “screen”
Identifier “Screen0”
Device “Card0”
ModelName “Monitor0”
Default Depth 24
SubSection “Display”
ViewPort 0 0
Depth 24
Modes “1024*768”
EndSubSection
EndSection
修改主板网卡驱动如下:将原来的驱动intel换成vesa
Driver "vesa"
(5)reboot 就能进入系统了。
附:修改过的xorg.conf文件
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "catalogue:/etc/X11/fontpath.d"
FontPath "built-ins"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "dri"
Load "dri2"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-107
VertRefresh 48-120
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024*768"
EndSubSection
EndSection
相关文章推荐
- linux安装amd显卡驱动后不能进入图形界面的解决办法
- VMware 中安装ubuntu10.04后图形界面不能使用键盘登陆的解决办法
- freebsd进入图形界面后,键盘和鼠标不能用的解决办法
- ubuntu 12.04安装nvidia显卡驱动后无法进入图形界面的解决办法
- freebsd进入gnome图形界面后,键盘和鼠标不能用的解决办法
- freebsd进入gnome图形界面后,键盘和鼠标不能用的解决办法
- ubuntu10.10 驱动安装(解决显卡驱动引起的不能进入图形界面)
- 虚拟机redhat9开机不能进入图形界面解决办法
- ubuntu 12.04安装nvidia显卡驱动后无法进入图形界面的解决办法
- ubuntu10.10 驱动安装(解决显卡驱动引起的不能进入图形界面)
- [Raspberry]树莓派Raspberry 安装输入法后重启黑屏,无法进入图形界面
- ubuntu 14.04 安装英伟达驱动界面不能显示解决办法 泰坦和k10通过测试
- 关于安装了.xip形式的Xcode8之后,模拟器总是显示黑屏(黑底白苹果图标)的解决办法
- Ubuntu 14.04 卸载搜狗输入法后无法进入图形界面问题解决办法
- VMware unbuntu 安装之后进入系统黑屏 解决办法
- 三星笔记本R428安装xp win7双系统,切换系统重启才能进入系统解决办法。
- Virtual Box 中安装Cent OS时出现不能进入图形界面
- ubuntu安装显卡驱动后无法进入图形界面的解决方法
- Ubuntu安装界面下方无法显示问题,导致无法操作解决办法
- VMware下BT4无法进入图形界面解决办法