How to attach iSCSI LUN to ESXi server
2010-11-06 12:24
1006 查看
Author: Matt Song
Date: 2010/11/06
This article is going to show you how to attach a LUN from a storage server to a ESXi server. Please make sure you have already installed a Storage server and a ESXi Server.
About how to deploy a storage server, please refer to this: http://mattsong.blog.51cto.com/2355482/413153
About how to install a ESXi server, please refer to this: http://mattsong.blog.51cto.com/2355482/413163
Now let's get start :)
Open vShere Client, connect to ESXi server, switch to Configuration tab, click Storage Adapters andclick iSCSI software Adapter's Properties
Click configure.
Select Enable and click OK, wait for a while.
Open Configure window again, and copy the LUN's IQN to iSCSI Name text box. And click OK.
(IQN means iSCSI Qualified Name, about how to create a LUN, please refer to: http://mattsong.blog.51cto.com/2355482/413158)
Now go to the Dynamic Discovery tab, click Add.
Input the Storage server's IP, the default port is 3260. (If you have configured CHAP for authentication, then you should also check the CHAP item.)
The storage server has been added to the list. now click Close.
Choose yes if this windows shows up, wait for a while until rescan finished.
Now we can see the LUN has attached to ESXi server.
The next thing we should do is add this LUN to ESXi server's storage, Select Storage, and click Add Storage.
Choose Disk/LUN at this window, click Next.
The LUN you created on the storage server will automatically listed at this window. Select a LUN you want to added and click Next.
Give your LUN a name. and Click Finish.(Other items could all use default setting)
The LUN has added, like the picture shows:
Now you can upload files to that LUN, just right click it and choose Browse Datastore.
Create a folder for ISO. The operation is just as same as Windows Explorer.
Use this to upload file.
Uploading :)
All done :)
Date: 2010/11/06
This article is going to show you how to attach a LUN from a storage server to a ESXi server. Please make sure you have already installed a Storage server and a ESXi Server.
About how to deploy a storage server, please refer to this: http://mattsong.blog.51cto.com/2355482/413153
About how to install a ESXi server, please refer to this: http://mattsong.blog.51cto.com/2355482/413163
Now let's get start :)
Open vShere Client, connect to ESXi server, switch to Configuration tab, click Storage Adapters andclick iSCSI software Adapter's Properties
Click configure.
Select Enable and click OK, wait for a while.
Open Configure window again, and copy the LUN's IQN to iSCSI Name text box. And click OK.
(IQN means iSCSI Qualified Name, about how to create a LUN, please refer to: http://mattsong.blog.51cto.com/2355482/413158)
Now go to the Dynamic Discovery tab, click Add.
Input the Storage server's IP, the default port is 3260. (If you have configured CHAP for authentication, then you should also check the CHAP item.)
The storage server has been added to the list. now click Close.
Choose yes if this windows shows up, wait for a while until rescan finished.
Now we can see the LUN has attached to ESXi server.
The next thing we should do is add this LUN to ESXi server's storage, Select Storage, and click Add Storage.
Choose Disk/LUN at this window, click Next.
The LUN you created on the storage server will automatically listed at this window. Select a LUN you want to added and click Next.
Give your LUN a name. and Click Finish.(Other items could all use default setting)
The LUN has added, like the picture shows:
Now you can upload files to that LUN, just right click it and choose Browse Datastore.
Create a folder for ISO. The operation is just as same as Windows Explorer.
Use this to upload file.
Uploading :)
All done :)
相关文章推荐
- vSphere Howto: Remove a LUN from an ESXi server
- How to install VMware ESXi Server 4.1 in VMware workstation 7.0
- How to Properly Remove Datastore or LUN from ESXi 5.x hosts
- How to Properly Remove Datastore or LUN from ESXi 5.x hosts
- How to attach to running target w/o reset from Linux JLinkGDBServer
- [SQL Server][FILESTREAM] -- How to Detach and Attach a SQL Server FILESTREAM Enabled Database
- How to install 3 nodes Nutanix Cluster in one ESXi 6.0 Server
- How to configure ESXi to boot via Software iSCSI?
- How to hot add lun to Linux server without rebooting
- How to custom search results in SharePoint Server 2013
- how to create a flask server
- How To Install Node.js on a CentOS 7 server
- How to failover automatically in windows server 2008 failover cluster
- how to debug store procedure in sql server 2005
- (iAS10g)Howtousereports/rwservlettogetreportserverinformation
- 继续摘抄:How to fix Apache – “Could not reliably determine the server’s fully qualified domain name, using 127.0.1.1 for ServerName”
- How to migrate DTS package from Server A to Server B
- How to enable SSL on domino server
- How to configure samba server in Linux Print
- SQL Server Management Studio Tips : How to activate saving table modifications