Cognos 8.4 在 Windows Server 2008 及 IIS 7.0 中的配置
2010-07-12 21:01
417 查看
环境:Cognos 8.4 + windows Server 2008 + SQL Server 2005
参考资料:Configuring IIS 7.0 and Cognos 8
Cognos configuration的配置完成以后,在配置IIS虚拟目录时和在windows 2003的环境中配置IIS有些差异,具体配置步骤分为五步:
1、检查IIS是否装了CGI或ISAPI;
2、创建Cognos 8的虚拟目录;
3、修改ISAPI 或者 CGI Extensions;
4、给cgi-bin虚拟目录添加module mapping;
5、修改..\c8\cgi-bin\web.config的module mapping
具体如下:
1、检查IIS是否装了CGI或ISAPI
打开Server Manager,如下图操作:
2、创建Cognos 8的虚拟目录
在Default Web Site下创建一个虚拟目录并命名为:cognos8
在cognos8虚拟目下创建一个名为“cgi-bin”的虚拟目录,如:
3、修改ISAPI 或者 CGI Extensions
在左边树形节点上选择Server一级,并双击进入右边的ISAPI and CGI Restrictions
在最右侧Action面板里面点击“Add...”按钮,并输入如下内容:
以上内容也可以改为
需要注意的是,在添加以上内容的时候需要选中“Allow extension path to execute”复选框。
点击选择右边的“Edit Feature Settings”,同时选中“Allow unspecified CGI Modules”和"Allow unspecified ISAPIModules"
4、给cgi-bin虚拟目录添加module mapping
点击选择虚拟目录“cgi-bin”,并在功能列表中选择“Handler Mapping”
点击选择刚添加的cgi-cognos,并在右侧选择“Edit Feature Permissions”,并选中"Execute"
5、修改..\c8\cgi-bin\web.config的module mapping
在..\c8\cgi-bin目录下找到web.config并打开它
找到如下的一段节点:
<add path="*.cgi" verb="*" modules="CgiModule" resourceType="Unspecified" />
并在最后添加allowPathInfo="true",如:
<add path="*.cgi" verb="*" modules="CgiModule" resourceType="Unspecified" allowPathInfo="true" />
最后即可以访问cognos connection
原文地址:/article/5633079.html
参考资料:Configuring IIS 7.0 and Cognos 8
Cognos configuration的配置完成以后,在配置IIS虚拟目录时和在windows 2003的环境中配置IIS有些差异,具体配置步骤分为五步:
1、检查IIS是否装了CGI或ISAPI;
2、创建Cognos 8的虚拟目录;
3、修改ISAPI 或者 CGI Extensions;
4、给cgi-bin虚拟目录添加module mapping;
5、修改..\c8\cgi-bin\web.config的module mapping
具体如下:
1、检查IIS是否装了CGI或ISAPI
打开Server Manager,如下图操作:
2、创建Cognos 8的虚拟目录
在Default Web Site下创建一个虚拟目录并命名为:cognos8
在cognos8虚拟目下创建一个名为“cgi-bin”的虚拟目录,如:
3、修改ISAPI 或者 CGI Extensions
在左边树形节点上选择Server一级,并双击进入右边的ISAPI and CGI Restrictions
在最右侧Action面板里面点击“Add...”按钮,并输入如下内容:
以上内容也可以改为
需要注意的是,在添加以上内容的时候需要选中“Allow extension path to execute”复选框。
点击选择右边的“Edit Feature Settings”,同时选中“Allow unspecified CGI Modules”和"Allow unspecified ISAPIModules"
4、给cgi-bin虚拟目录添加module mapping
点击选择虚拟目录“cgi-bin”,并在功能列表中选择“Handler Mapping”
点击选择刚添加的cgi-cognos,并在右侧选择“Edit Feature Permissions”,并选中"Execute"
5、修改..\c8\cgi-bin\web.config的module mapping
在..\c8\cgi-bin目录下找到web.config并打开它
找到如下的一段节点:
<add path="*.cgi" verb="*" modules="CgiModule" resourceType="Unspecified" />
并在最后添加allowPathInfo="true",如:
<add path="*.cgi" verb="*" modules="CgiModule" resourceType="Unspecified" allowPathInfo="true" />
最后即可以访问cognos connection
原文地址:/article/5633079.html
相关文章推荐
- Microsoft KB:如何在 Windows Server 2008 故障转移群集中的 IIS 7.0 配置 FTP 7.5
- Windows Server 2008 IIS 7.0配置php,MySQL,Zend,phpMyadmin
- 在 Windows Server 2008 上安装 IIS 7.0
- 在 Windows Server 2008 上安装 IIS 7.0
- Windows Server 2008 IIS 7.0安装
- Windows server 2008 配置IIS (.NET Framework 4.0下)
- IIS服务器 远程发布(Web Deploy)配置 VS2010 开发环境 Windows Server 2008服务器系统
- 在 Windows Server 2008 上安装 IIS 7.0
- 在Windows 2008/2008 R2 上配置IIS 7.0/7.5 故障转移集群
- Windows Server 2008下IIS 7配置ASP+ACCESS环境(超详细+图片)
- Windows Server 2008 R2 IIS7.5下PHP、MySQL快速环境配置【图】
- Windows Server 2008 R2 相关配置(二):IIS下Web添加FTP发布
- windows server 2008 r2 系统上配置IIS与.net Framework 3.5,禁止IE8增强安全设置
- Windows Server 2008 IIS 7.0 WebDAV设置
- Cognos 8.4 + windows Server 2008 + SQL Server 2005
- IIS服务器 远程发布(Web Deploy)配置 VS2010 开发环境 Windows Server 2008服务器系统
- windows server 2008 r2 IIS 6 元数据库与IIS 6 配置的兼容性 解决方案
- 修改windows server 2008 时间和日期格式 IIS配置后显示错误
- [Windows Server 2008] IIS自带FTP配置方法
- 转:Windows Server 2008 IIS 7.0 图文安装详解