Android 下使用wpa_cli 连接 wifi

# cp /media/sd8686.bin /lib/firmware/sd8686.bin
# cp /media/sd8686_helper.bin /lib/firmware/sd8686_helper.bin
# dpkg -i kernel-smartq5-modules_2.6.24.7-smartq5-050509_all.deb

# insmod sd8686.ko

# ifconfig -a

# chmod 0660 /data/misc/wifi/wpa_supplicant.conf

* The content of wpa_supplicant.conf

----

update_config=1

ctrl_interface=DIR=/data/system/wpa_supplicant GROUP=1010

----

# /system/bin/wpa_supplicant -Dwext -iwlan0 -c /data/misc/wifi/wpa_supplicant.conf

# /system/bin/wpa_cli -i wlan0 -p /data/system/wpa_supplicant
> status
INACTIVE
> help
> add_network
> set_network 0 ssid "NETGEAR"
> set_network 0 key_mgmt NONE
> set_network 0 priority 0
> list_network
> save_config
> enable_network 0

bssid=00:24:b2:5b:5b:0a
ssid=NETGEAR
….
wpa_state=COMPLETED

本文来自CSDN博客，转载请标明出处：http://blog.csdn.net/stevenliyong/archive/2010/03/19/5396336.aspx