[linux|Ubuntu]安装杂牌扫描仪－方正F5580

[linux|Ubuntu]安装杂牌扫描仪－方正F5580

Author: Slain.Carmick

呵呵，终于把扫描仪安装上了，牌子是方正F5580，算是杂牌子了吧。
先贴一下firmware的下载地址： ccd68861.fw
不想进去的，这里是简单的steps
安装sane，xsane，用sane-find-scanner scanimage -L 搜索是否能够识别你的usb扫描仪，然后xsane按照报错信息下载fw。
我的报错：device `gt68xx:libusb:002:002′ is a Plustek OpticPro U16B flatbed scanner

首先，安装sane，新利得或者终端都可以 我喜欢终端
sudo apt-get install sane
之后，连接上你的扫描仪，在这里我走了很大的弯路（如果你不放心，在以下的命令上加上sudo，高手莫要喧嚣，不会出问题的。）。别人都说输入 sane-find-scanner就可以了，倒是没错，找到了我的扫描仪。

# sane-find-scanner will now attempt to detect your scanner. If the

# result is different from what you expected, first make sure your

# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that

# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0×07b3, product=0×0402 [600DPI USB Scanner], chip=GT-6816) at libusb:002:002

# Your USB scanner was (probably) detected. It may or may not be supported by ！这句话最可恨！

# SANE. Try scanimage -L and read the backend’s manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports

# can’t be detected by this program.
# You may want to run this program as root to find all devices. Once you

# found the scanner devices, be sure to adjust access permissions as

# necessary.

按照要求，我再次输入 scanimage -L
出现了

device `gt68xx:libusb:002:002′ is a Plustek OpticPro U16B flatbed scanner
device `genesys:libusb:005:002' is a Medion MD5345/MD6228/MD6471 flatbed scanner（我的方正F6580出现这样的信息）

终于找到了我的扫描仪，嘿嘿，开始扫描，不过这里出现了问题。
输入 xsane之后，（ubuntu自带的GUI的sane，你可以依靠 sudo apt-get install xsane 来安装），给我报了下面的错误。

[gt68xx] Couldn’t open firmware file (`/usr/share/sane/gt68xx/ccd68861.fw’): No such file or directory

看来是没有firmware，去了sane的offical site，人家竟然说去windows下提取，想了想我那个可怜的deepin版本的瘸腿XP虚拟机，决定还是在网上找找fw，最后在一个.de的网站上找到了，我传了上来（下载ccd68861.fw） ,cp到那个目录，就可以了。
后来还出了 以下的报错，不过只要开关下扫描仪就可以了。

No scanners were identified. If you were expecting something different,

check that the scanner is plugged in, turned on and detected by the

sane-find-scanner tool (if appropriate). Please read the documentation

which came with this software (README, FAQ, manpages).

根据上述方法，我公司的方正F6580能够很好的在UBUNTU 8.10上工作，在此对原文作者表示感谢。在Linux上的工作可以很好的搬到单位环境上实现了。这是LINUX走向生产化的第一步。