linux svn 服务器安装总结
2009-03-01 00:15
471 查看
svn+apache服务器安装了3遍,每次都要很长时间,主要还靠网友们提供的信息,想想自己用了这么久的网络资源,却没有为大家贡献过什么东西.这次把安装过程和遇到的问题写下来,一是为了自己下次再安装时容易些,而是希望对大家有帮助.
文笔不行,主要还是把指令和遇到的错误和解决方法贴出来吧.
cd httpd-2.0.59
make claen
make distclean
./configure --enable-dav --enable-so
make -j6
make install
cd ../subversion-1.4.3
make clean
make distclean
./configure --with-apxs=/usr/local/apache2/bin/apxs --prefix=/usr/local/subversion --with-apr=/usr/local/apache2 --with-apr-util=/usr/local/apache2 --with-ssl --enable-maintainer-mode --enable-shared
make -j6
make install
mkdir /svndata
svnadmin create /svndata/newton
cp httpd.conf /usr/local/apache2/conf/
mv authz /svndata/newton/conf/authz
/usr/local/apache2/bin/htpasswd -c /svndata/newton/conf/passwd whj
/usr/local/apache2/bin/htpasswd /svndata/newton/conf/passwd lyc
svn co http://192.168.55.141/svn/newton
chown daemon.daemon /svndata/newton/ -R
/usr/local/apache2/bin/apachectl restart
安装过程最容易出现的是访问控制的问题
svn co http://localhost/svn/newton
如果提示错误,请检查apache输出的错误日志
vim /usr/local/apache2/logs/error_log
Access denied: 'whj' PROPFIND newton
这个问题一般是路径不对导致的比如:[newton:/] 写成:[newlon:/]
还有个容易出现的问题是apache的配置跟auth的配置有矛盾,比如apache配置允许匿名访问,而auth文件又配置不允许匿名访问
安装完成一定要记得提交测试,能下载不一定就能上传,每次安装的后都会忘记将newton的owner设置为daemon(默认用户和组,也可以自己建立)
[Sat Feb 28 23:17:23 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:22:42 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/203a1dfc-0f64-0410-8add-a0516303537a. [500, #0]
[Sat Feb 28 23:22:42 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:22:42 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:22:53 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/69a7bcfc-0f64-0410-b577-83ea124dbb06. [500, #0]
[Sat Feb 28 23:22:53 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:22:53 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:23:11 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/a3b8cefd-0f64-0410-8df9-bab415da885d. [500, #0]
[Sat Feb 28 23:23:11 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:23:11 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:26:36 2009] [notice] SIGHUP received. Attempting to restart
httpd: Could not determine the server's fully qualified domain name, using 192.168.55.141 for ServerName
[Sat Feb 28 23:26:36 2009] [notice] Apache/2.0.59 (Unix) DAV/2 SVN/1.4.3 configured -- resuming normal operations
[Sat Feb 28 23:26:39 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/4b8a9c0a-1064-0410-82bd-9573e0f515b9. [500, #0]
[Sat Feb 28 23:26:39 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:26:39 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:28:32 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/ac2a7a11-1064-0410-8759-b8116dc32342. [500, #0]
[Sat Feb 28 23:28:32 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:28:32 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:59:02 2009] [notice] SIGHUP received. Attempting to restart
httpd: Could not determine the server's fully qualified domain name, using 192.168.55.141 for ServerName
[Sat Feb 28 23:59:02 2009] [notice] Apache/2.0.59 (Unix) DAV/2 SVN/1.4.3 configured -- resuming normal operations
auth文件配置内容:
### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
### - a single user,
### - a group of users defined in a special [groups] section,
### - an alias defined in a special [aliases] section,
### - all authenticated users, using the '$authenticated' token,
### - only anonymous users, using the '$anonymous' token,
### - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').
[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
[groups]
# harry_and_sally = whj,harry,sally
# harry_sally_and_joe = harry,sally,&joe
[/svndata/newton]
whj = rw
lyc = rw
#* = rw
[newton:/]
whj = rw
lyc = rw
#* = rw
# [/foo/bar]
# harry = rw
# &joe = r
# * =
# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r
svnserver.conf文件配置
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)
### Visit http://subversion.tigris.org/ for more information.
[general]
### These options control access to the repository for unauthenticated
### and authenticated users. Valid values are "write", "read",
### and "none". The sample settings below are the defaults.
anon-access = read
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password f
4000
ile.
password-db = /svndata/newton/conf/passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = /svndata/newton/conf/authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
realm = newton
[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 256
http.conf配置内容
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/foo_log".
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr/local/apache2"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
</IfModule>
<Location /svn>
DAV svn
SVNParentPath /svndata
AuthType Basic
AuthName "Subversion repository"
AuthUserFile /svndata/newton/conf/passwd
AuthzSVNAccessFile /svndata/newton/conf/authz
# try anonymous access first, resort to real
# authentication if necessary.
#Satisfy Any
Require valid-user
<LimitExcept GET PROPFIND OPTIONS REPORT>
Require valid-user
</LimitExcept>
</Location>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin you@example.com
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/usr/local/apache2/htdocs"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/usr/local/apache2/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^/.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t /"%r/" %>s %b /"%{Referer}i/" /"%{User-Agent}i/"" combined
LogFormat "%h %l %u %t /"%r/" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t /"%r/" %>s %b /"%{Referer}i/" /"%{User-Agent}i/" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access_log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>
#
# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/usr/local/apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /miss
8c89
ing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
文笔不行,主要还是把指令和遇到的错误和解决方法贴出来吧.
cd httpd-2.0.59
make claen
make distclean
./configure --enable-dav --enable-so
make -j6
make install
cd ../subversion-1.4.3
make clean
make distclean
./configure --with-apxs=/usr/local/apache2/bin/apxs --prefix=/usr/local/subversion --with-apr=/usr/local/apache2 --with-apr-util=/usr/local/apache2 --with-ssl --enable-maintainer-mode --enable-shared
make -j6
make install
mkdir /svndata
svnadmin create /svndata/newton
cp httpd.conf /usr/local/apache2/conf/
mv authz /svndata/newton/conf/authz
/usr/local/apache2/bin/htpasswd -c /svndata/newton/conf/passwd whj
/usr/local/apache2/bin/htpasswd /svndata/newton/conf/passwd lyc
svn co http://192.168.55.141/svn/newton
chown daemon.daemon /svndata/newton/ -R
/usr/local/apache2/bin/apachectl restart
安装过程最容易出现的是访问控制的问题
svn co http://localhost/svn/newton
如果提示错误,请检查apache输出的错误日志
vim /usr/local/apache2/logs/error_log
Access denied: 'whj' PROPFIND newton
这个问题一般是路径不对导致的比如:[newton:/] 写成:[newlon:/]
还有个容易出现的问题是apache的配置跟auth的配置有矛盾,比如apache配置允许匿名访问,而auth文件又配置不允许匿名访问
安装完成一定要记得提交测试,能下载不一定就能上传,每次安装的后都会忘记将newton的owner设置为daemon(默认用户和组,也可以自己建立)
[Sat Feb 28 23:17:23 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:22:42 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/203a1dfc-0f64-0410-8add-a0516303537a. [500, #0]
[Sat Feb 28 23:22:42 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:22:42 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:22:53 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/69a7bcfc-0f64-0410-b577-83ea124dbb06. [500, #0]
[Sat Feb 28 23:22:53 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:22:53 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:23:11 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/a3b8cefd-0f64-0410-8df9-bab415da885d. [500, #0]
[Sat Feb 28 23:23:11 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:23:11 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:26:36 2009] [notice] SIGHUP received. Attempting to restart
httpd: Could not determine the server's fully qualified domain name, using 192.168.55.141 for ServerName
[Sat Feb 28 23:26:36 2009] [notice] Apache/2.0.59 (Unix) DAV/2 SVN/1.4.3 configured -- resuming normal operations
[Sat Feb 28 23:26:39 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/4b8a9c0a-1064-0410-82bd-9573e0f515b9. [500, #0]
[Sat Feb 28 23:26:39 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:26:39 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:28:32 2009] [error] [client 192.168.55.112] Could not create activity /svn/newton/!svn/act/ac2a7a11-1064-0410-8759-b8116dc32342. [500, #0]
[Sat Feb 28 23:28:32 2009] [error] [client 192.168.55.112] could not begin a transaction [500, #13]
[Sat Feb 28 23:28:32 2009] [error] [client 192.168.55.112] Can't create directory '/svndata/newton/db/transactions/0-1.txn': Permission denied [500, #13]
[Sat Feb 28 23:59:02 2009] [notice] SIGHUP received. Attempting to restart
httpd: Could not determine the server's fully qualified domain name, using 192.168.55.141 for ServerName
[Sat Feb 28 23:59:02 2009] [notice] Apache/2.0.59 (Unix) DAV/2 SVN/1.4.3 configured -- resuming normal operations
auth文件配置内容:
### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
### - a single user,
### - a group of users defined in a special [groups] section,
### - an alias defined in a special [aliases] section,
### - all authenticated users, using the '$authenticated' token,
### - only anonymous users, using the '$anonymous' token,
### - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').
[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
[groups]
# harry_and_sally = whj,harry,sally
# harry_sally_and_joe = harry,sally,&joe
[/svndata/newton]
whj = rw
lyc = rw
#* = rw
[newton:/]
whj = rw
lyc = rw
#* = rw
# [/foo/bar]
# harry = rw
# &joe = r
# * =
# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r
svnserver.conf文件配置
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)
### Visit http://subversion.tigris.org/ for more information.
[general]
### These options control access to the repository for unauthenticated
### and authenticated users. Valid values are "write", "read",
### and "none". The sample settings below are the defaults.
anon-access = read
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password f
4000
ile.
password-db = /svndata/newton/conf/passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = /svndata/newton/conf/authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
realm = newton
[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 256
http.conf配置内容
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/foo_log".
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr/local/apache2"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
</IfModule>
<Location /svn>
DAV svn
SVNParentPath /svndata
AuthType Basic
AuthName "Subversion repository"
AuthUserFile /svndata/newton/conf/passwd
AuthzSVNAccessFile /svndata/newton/conf/authz
# try anonymous access first, resort to real
# authentication if necessary.
#Satisfy Any
Require valid-user
<LimitExcept GET PROPFIND OPTIONS REPORT>
Require valid-user
</LimitExcept>
</Location>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin you@example.com
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/usr/local/apache2/htdocs"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/usr/local/apache2/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^/.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t /"%r/" %>s %b /"%{Referer}i/" /"%{User-Agent}i/"" combined
LogFormat "%h %l %u %t /"%r/" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t /"%r/" %>s %b /"%{Referer}i/" /"%{User-Agent}i/" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access_log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>
#
# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/usr/local/apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /miss
8c89
ing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- linux下svn服务器安装配置与启动
- Linux(Centos6.5)下安装svn服务器，并通过http访问
- linux下svn服务器安装和配置
- linux下SVN服务器安装
- Linux中SVN服务器安装与使用以及windows客户端的使用(CentOS-6.5)
- Linux(Centos6.5)下安装svn服务器，并通过http访问
- Linux安装SVN与配置(自己总结)
- linux安装配置和使用svn服务器
- linux如何快速安装svn服务器？
- 160425、linux安装SVN服务器
- SVN服务器安装配置（Windows、Linux）
- Linux(Centos6.5)下安装svn服务器，并通过http访问
- linux安装svn服务器（yum方式）
- Linux下源码编译安装配置SVN服务器
- Linux 安装部署SVN服务器
- linux 安装svn服务器
- linux 下svn服务器安装
- linux 服务器安装svn 及 自动更新部署
- linux系统上安装svn服务器 环境linux+nginx+svnserver