如何安装,破解iPhone系统
2008-06-24 16:44
417 查看
iPhone Jailbroken Tutorial[/b]
2008-7-17 Figo.Yang
1) [/b]How to put a iPhone [/b]into recovery Mode[/b]
Step 1. Keep your iPhone connected with iTunes7.6 though cable.
Step 2. Turn off your iPhone.
Step 3. Hold down the power and home button about 10 seconds.
Step 4. When you see the Apple logo, release the power button but continue holding the home button down.
2) [/b]How to[/b] install iPhone [/b]firmware.[/b]
Step 5. In iTunes,
In Windows OS, press “Shift” key, in Mac OS, press “option” key, at the same time click “Restore”.
Setp 6. Choose a firmware 1.1.4 file “iPhone1,1_1.1.4_4A102_Restore.ipsw[/b]”. (If you want to install other firmware such as firmware 1.1.1, you can choose “iPhone1,1_1.1.1_3A109a_Restore.ipsw[/b]”.) When it finished, there will be a 1015 error message shown. Don’t care about this error. Just go on.
Step 7. When Step 6 finished, run “iBrickr”[/b] in Windows OS. Chick the restart button, if the real-phone’s background turn to Green, do step5 and step6 again. If the iPhone’s background turn to Red go to step 8.
3) [/b]How to jailbreak a iPhone[/b]
Step 8. Trun to “iPlus 2.2[/b]” folder, run “jailbreak.bat”
4) [/b]How to unlock a Sim-Card of a iPhone[/b]
Step 9. Normally, Step8 can unlock sim-card at the same time. If your sim-card is not unlocked, please use “BootNeuter” to check if the sim-card is unlocked. It can write the BootLoader which version your want (I use BootLoader verion 4.6). The most of all, it can unlock Baseband which will check the sim-card, provide call functions.
“BootNeuter” tool is a app on iPhone device. We can use “ibus_v2.0” to install it.
5) [/b]Which version firmware of iPhone can be jailbroken?[/b]
All the steps above, only shows how to setup a iPhone with OS 1.1.4 below. After you follow the steps to setup a iPhone with a OS 1.1.4A102 version, we can go to next to make a iPhone2.0 OS.
6) [/b]How to jailbreak iPhone2.0?[/b]
All the steps above, only shows how to setup a iPhone with OS 1.1.4 below. After you follow the steps to setup a iPhone with a OS 1.1.4A102 version, we can go to next to make a iPhone2.0 OS.
(a) Run iTunes7.7. (Version 7.7 is a must.) Then chick “update” with “Shift” pressed.
(b) Choose the custom iPhone2.0 5A347 version firmware “iPhone1,1_2.0_5A347_Custom_Restore.ipsw”[/b]
(c) Then the iPhone will be update to iPhone2.0 firmware.
(d) iPhone will restart, then BootNeure2.0’s UI will be shown. Then message “Flashing baseband...” will be shown. Then a successful message will be shown. Then you can test that a jailbroken iPhone2.0 is on your iPhone device now.
7) [/b]Which tools we need?[/b]
a) iPhone1,1_1.1.4_4A102_Restore.ipsw
The official firmware coming from Apple.[/i]
b) iPhone1,1_1.1.1_3A109a_Restore.ipsw
The official firmware coming from Apple.[/i]
c) iPhone1,1_2.0_5A347_Custom_Restore.ipsw
The custom iPhone2.0 5A347 version firmware.[/i]
d) iBrickr
The Windows tool to restart iPhone to check the bootloader of iPhone is OK for install new firmware.[/i]
e) iPlus 2.2
The Windows jailbreak tool of iPhone.[/i]
f) BootNeuter
The iPhone tool to rewrite iPhone’s BootLoader and unlock baseband. This tool should installed with iBus. There is no copy.[/i]
g) ibus_v2.0
The Window tool to install 3rd-part app in iPhone.[/i]
h) iTunesSetup7.6.exe
iTunes7.6 for Windows Version which can used to install iPhone1.1.4 or bellow .[/i]
i) iTunes7.7.0.43.exe
iTunes7.7 for Windows which can used to install iPhone2.0.[/i]
If there is some problem, lease let me known.
2008-7-17 Figo.Yang
1) [/b]How to put a iPhone [/b]into recovery Mode[/b]
Step 1. Keep your iPhone connected with iTunes7.6 though cable.
Step 2. Turn off your iPhone.
Step 3. Hold down the power and home button about 10 seconds.
Step 4. When you see the Apple logo, release the power button but continue holding the home button down.
2) [/b]How to[/b] install iPhone [/b]firmware.[/b]
Step 5. In iTunes,
In Windows OS, press “Shift” key, in Mac OS, press “option” key, at the same time click “Restore”.
Setp 6. Choose a firmware 1.1.4 file “iPhone1,1_1.1.4_4A102_Restore.ipsw[/b]”. (If you want to install other firmware such as firmware 1.1.1, you can choose “iPhone1,1_1.1.1_3A109a_Restore.ipsw[/b]”.) When it finished, there will be a 1015 error message shown. Don’t care about this error. Just go on.
Step 7. When Step 6 finished, run “iBrickr”[/b] in Windows OS. Chick the restart button, if the real-phone’s background turn to Green, do step5 and step6 again. If the iPhone’s background turn to Red go to step 8.
3) [/b]How to jailbreak a iPhone[/b]
Step 8. Trun to “iPlus 2.2[/b]” folder, run “jailbreak.bat”
4) [/b]How to unlock a Sim-Card of a iPhone[/b]
Step 9. Normally, Step8 can unlock sim-card at the same time. If your sim-card is not unlocked, please use “BootNeuter” to check if the sim-card is unlocked. It can write the BootLoader which version your want (I use BootLoader verion 4.6). The most of all, it can unlock Baseband which will check the sim-card, provide call functions.
“BootNeuter” tool is a app on iPhone device. We can use “ibus_v2.0” to install it.
5) [/b]Which version firmware of iPhone can be jailbroken?[/b]
All the steps above, only shows how to setup a iPhone with OS 1.1.4 below. After you follow the steps to setup a iPhone with a OS 1.1.4A102 version, we can go to next to make a iPhone2.0 OS.
6) [/b]How to jailbreak iPhone2.0?[/b]
All the steps above, only shows how to setup a iPhone with OS 1.1.4 below. After you follow the steps to setup a iPhone with a OS 1.1.4A102 version, we can go to next to make a iPhone2.0 OS.
(a) Run iTunes7.7. (Version 7.7 is a must.) Then chick “update” with “Shift” pressed.
(b) Choose the custom iPhone2.0 5A347 version firmware “iPhone1,1_2.0_5A347_Custom_Restore.ipsw”[/b]
(c) Then the iPhone will be update to iPhone2.0 firmware.
(d) iPhone will restart, then BootNeure2.0’s UI will be shown. Then message “Flashing baseband...” will be shown. Then a successful message will be shown. Then you can test that a jailbroken iPhone2.0 is on your iPhone device now.
7) [/b]Which tools we need?[/b]
a) iPhone1,1_1.1.4_4A102_Restore.ipsw
The official firmware coming from Apple.[/i]
b) iPhone1,1_1.1.1_3A109a_Restore.ipsw
The official firmware coming from Apple.[/i]
c) iPhone1,1_2.0_5A347_Custom_Restore.ipsw
The custom iPhone2.0 5A347 version firmware.[/i]
d) iBrickr
The Windows tool to restart iPhone to check the bootloader of iPhone is OK for install new firmware.[/i]
e) iPlus 2.2
The Windows jailbreak tool of iPhone.[/i]
f) BootNeuter
The iPhone tool to rewrite iPhone’s BootLoader and unlock baseband. This tool should installed with iBus. There is no copy.[/i]
g) ibus_v2.0
The Window tool to install 3rd-part app in iPhone.[/i]
h) iTunesSetup7.6.exe
iTunes7.6 for Windows Version which can used to install iPhone1.1.4 or bellow .[/i]
i) iTunes7.7.0.43.exe
iTunes7.7 for Windows which can used to install iPhone2.0.[/i]
If there is some problem, lease let me known.
相关文章推荐
- 如何在iPhone上安装Android系统
- 如何安装linux系统
- 如何在win10(64位系统)上安装apache服务器
- 如何通过局域网安装系统(网刻)
- 【转载】如何在Ubuntu上安装LAMP服务器系统?
- 如何在win系统下安装树莓派的系统到SD卡(菜鸟教程一)
- 【转】如何在Mac系统中安装R的rattle包
- Windows“系统还原”工具的作用以及如何安装和打开?
- win7如何禁止系统自动安装驱动程序
- 如何利用GPT分区安装系统舍弃掉MBR分区
- 电脑预装的都是Win8系统如何再安装win7实现双系统
- 教你如何将你的Qt项目打包安装在MeeGo系统中
- 如何将你的Qt项目打包安装在MeeGo系统中
- 如何将xcode的应用程序安装到真正的iphone手机上
- Redis进阶实践之二如何在Linux系统上安装安装Redis
- 在Win8.1系统下如何安装运行SQL Server 2005
- iOS开发_iphone开发_文件系统NSFileManager_如何创建、重命名和删除文件
- 如何使用GHOST 方式来安装XP 和Win7 双系统?
- 不同系统如何安装 Git
- 如何使用U盘安装操作系统,非PE安装系统的方法