转自微软官方站:微软终于出DNS欺骗补丁了,最近没关注差点漏了
2008-04-25 16:28
483 查看
Microsoft Security Bulletin MS08-020 – Important
Vulnerability in DNS Client Could Allow Spoofing (945553)
Published: April 8, 2008 | Updated: April 11, 2008Version: 1.2
General Information
sID='2l1-EQB'Executive Summary
This security update resolves a privately reported vulnerability. This spoofing vulnerability exists in Windows DNS clients and could allow an attacker to send specially crafted responses to DNS requests, thereby spoofing or redirecting Internet traffic from legitimate locations.This is an important security update for Windows Vista and Windows Vista x64 Edition, and for all supported editions of Microsoft Windows 2000, Windows XP, and Windows Server 2003. For more information, see the subsection, Affected and Non-Affected Software, in this section.
This security update addresses the vulnerability by increasing the randomness of DNS transaction IDs. For more information about the vulnerability, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.
Recommendation. Microsoft recommends that customers apply the update at the earliest opportunity.
Known Issues. None
Top of section
sID='2l1-EFC'
Affected and Non-Affected Software
The software listed here have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.Affected Software
Operating System | Maximum Security Impact | Aggregate Severity Rating | Bulletins Replaced by This Update |
Microsoft Windows 2000 Service Pack 4 | Spoofing | Important | None |
Windows XP Service Pack 2 | Spoofing | Important | None |
Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2 | Spoofing | Important | None |
Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2 | Spoofing | Important | None |
Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2 | Spoofing | Important | None |
Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems | Spoofing | Important | None |
Windows Vista | Spoofing | Important | None |
Windows Vista x64 Edition | Spoofing | Important | None |
Operating System |
Windows Vista Service Pack 1 (all editions) |
Windows Server 2008 (all editions) |
Top of section
sID='2l1-EVG';writePM(sID) | startA('s'+sID)Frequently Asked Questions (FAQ) Related to This Security UpdateendA() |
Where are the file information details?
The file information details can be found in Microsoft Knowledge Base Article 945553.
I am using an older version or edition of the software discussed in this security bulletin. What should I do?
The affected software listed in this bulletin has been tested to determine which versions or editions are affected. Other versions and editions are past their support life cycle. To determine the support life cycle for your product and version, visit Microsoft Support Lifecycle.
It should be a priority for customers who have older versions or editions of the software to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.
Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.
Top of section
Vulnerability Information
sID='3l1-EGAAC';writePM(sID) | startA('s'+sID)Severity Ratings and Vulnerability IdentifiersendA() |
Vulnerability Severity Rating and Maximum Security Impact by Affected Software | ||
Affected Software | DNS Spoofing Attack Vulnerability – CVE-2008-0087 | Aggregate Severity Rating |
Microsoft Windows 2000 Service Pack 4 | Important Spoofing | Important |
Windows XP Service Pack 2 | Important Spoofing | Important |
Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2 | Important Spoofing | Important |
Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2 | Important Spoofing | Important |
Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2 | Important Spoofing | Important |
Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems | Important Spoofing | Important |
Windows Vista | Important Spoofing | Important |
Windows Vista x64 Edition | Important Spoofing | Important |
Top of section
sID='3l1-E1DAC';writePM(sID) | startA('s'+sID)DNS Spoofing Attack Vulnerability – CVE-2008-0087endA() |
A spoofing vulnerability exists in Windows DNS clients. The vulnerability could allow an unauthenticated attacker to send malicious responses to DNS requests made by vulnerable clients, thereby spoofing or redirecting Internet traffic from legitimate locations.
To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2008-0087.
sID='3l2-EEEAC';writePM(sID) | startA('s'+sID)Mitigating Factors for DNS Spoofing Attack Vulnerability – CVE-2008-0087endA() |
Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability.
• | Microsoft has not identified any mitigations for this vulnerability. |
Top of section
sID='3l2-EMEAC';writePM(sID) | startA('s'+sID)Workarounds for DNS Spoofing Attack Vulnerability – CVE-2008-0087endA() |
Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update.
• | Microsoft has not identified any workarounds for this vulnerability. |
Top of section
sID='3l2-EUEAC';writePM(sID) | startA('s'+sID)FAQ for DNS Spoofing Attack Vulnerability – CVE-2008-0087endA() |
What is the scope of the vulnerability?
A spoofing vulnerability exists in Windows DNS Clients. An attacker who successfully exploited this vulnerability could impersonate a legitimate address.
What causes the vulnerability?
The Windows DNS Client service doesn’t provide enough entropy in its random choice of transaction values when performing DNS queries.
What might an attacker use the vulnerability to do?
An attacker who has successfully gained information about DNS client transaction IDs could use that information to send malicious responses to DNS requests.
How could an attacker exploit the vulnerability?
An attacker who successfully exploited this vulnerability could respond to a DNS query with false or misleading information, thereby redirecting Internet traffic from legitimate locations to an address of the attacker’s choice.
What is the Domain Name System (DNS)?
Domain Name System (DNS) is one of the industry-standard suite of protocols that comprise TCP/IP. DNS is implemented using two software components: the DNS server and the DNS client (or resolver). Both components are run as background service applications. Network resources are identified by numeric IP addresses, but these IP addresses are difficult for network users to remember. The DNS database contains records that map user-friendly alphanumeric names for network resources to the IP address used by those resources for communication. In this way, DNS acts as a mnemonic device, making network resources easier to remember for network users. For more information and to view logical diagrams illustrating how DNS fits with other Windows technologies, review the article How DNS Works.
Could the vulnerability be exploited over the Internet?
Yes, an attacker could exploit this vulnerability over the Internet by sending specific responses to an Internet-facing client system that is performing DNS queries.
What systems are primarily at risk from the vulnerability?
Any Windows system that is connected to a network or the Internet would be at risk. Windows Vista SP1 and Windows Server 2008 are not affected by this vulnerability.
What does the update do?
The update removes this vulnerability by increasing the randomness of the transaction IDs in DNS client communications.
When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.
When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.
Top of section
Top of section
Update Information
sID='4l1-EPGAC';writePM(sID) | startA('s'+sID)Detection and Deployment Tools and GuidanceendA() |
Manage the software and security updates you need to deploy to the servers, desktop, and mobile computers in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.
Security updates are available from Microsoft Update, Windows Update, and Office Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."
Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, “MS07-036”), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.
Detection and Deployment Guidance
Microsoft has provided detection and deployment guidance for this month’s security updates. This guidance will also help IT professionals understand how they can use various tools to help deploy the security update, such as Windows Update, Microsoft Update, Office Update, the Microsoft Baseline Security Analyzer (MBSA), the Office Detection Tool, Microsoft Systems Management Server (SMS), and the Extended Security Update Inventory Tool. For more information, see Microsoft Knowledge Base Article 910723.
Microsoft Baseline Security Analyzer
Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.
The following table provides the MBSA detection summary for this security update.
Software | MBSA 2.0.1 |
Microsoft Windows 2000 Server Service Pack 4 | Yes |
Windows XP Service Pack 2 | Yes |
Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2 | Yes |
Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2 | Yes |
Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2 | Yes |
Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems | Yes |
Windows Vista | See Note for Windows Vista below |
Windows Vista x64 Edition | See Note for Windows Vista below |
For more information about MBSA 2.0.1, see MBSA 2.0 Frequently Asked Questions.
Windows Server Update Services
By using Windows Server Update Services (WSUS), administrators can deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 to Windows 2000 and later operating systems. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site.
Systems Management Server
The following table provides the SMS detection and deployment summary for this security update.
Product | SMS 2.0 | SMS 2003 with SUSFP | SMS 2003 with ITMU | SCCM 2007 |
Microsoft Windows 2000 Server Service Pack 4 | Yes | Yes | Yes | Yes |
Windows XP Service Pack 2 | Yes | Yes | Yes | Yes |
Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2 | No | No | Yes | Yes |
Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2 | Yes | Yes | Yes | Yes |
Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2 | No | No | Yes | Yes |
Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems | No | No | Yes | Yes |
Windows Vista | No | No | See Note for Windows Vista below | Yes |
Windows Vista x64 Edition | No | No | See Note for Windows Vista below | Yes |
For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications. For more information about the Office Inventory Tool and other scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.
Note for Windows Vista Microsoft Systems Management Server 2003 with Service Pack 3 includes support for Windows Vista manageability.
System Center Configuration Manager (SCCM) 2007 uses WSUS 3.0 for detection of updates. For more information about SCCM 2007 Software Update Management, visit System Center Configuration Manager 2007.
For more information about SMS, visit the SMS Web site.
For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.
Top of section
sID='4l1-E4AAE';writePM(sID) | startA('s'+sID)Security Update DeploymentendA() |
Affected Software
For information about the specific security update for your affected software, click the appropriate link:
sID='4l2-EEBAE';writePM(sID) | startA('s'+sID)Microsoft Windows 2000 (all editions)endA() |
Reference Table
The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.
Inclusion in Future Service Packs | The update for this issue may be included in a future update rollup |
Deployment | |
Installing without user intervention | Windows 2000 Service Pack 4: Windows2000-kb945553-x86-enu /quiet |
Installing without restarting | Windows 2000 Service Pack 4: Windows2000-kb945553-x86-enu /norestart |
Further information | See the subsection, Detection and Deployment Tools and Guidance |
Update log File | KB945553.log |
Restart Requirement | |
Restart required? | Yes, you must restart your system after you apply this security update |
Hotpatching | Not applicable |
Removal Information | Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%/$NTUninstallKB945553$/Spuninst folder |
File Information | See Microsoft Knowledge Base Article 945553 |
Registry Key Verification | Windows 2000 Service Pack 4: HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Updates/Windows 2000/SP5/KB945553/Filelist |
sID='4l3-ELEAE';writePM(sID) | startA('s'+sID) Deployment Information endA() |
Installing the Update
When you install this security update, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.
For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
This security update supports the following setup switches.
Supported Security Update Installation Switches | |
Switch | Description |
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/overwriteoem | Overwrites OEM files without prompting |
/nobackup | Does not back up files needed for uninstall |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
/extract[:path] | Extracts files without starting the Setup program |
/ER | Enables extended error reporting |
/verbose | Enables verbose logging. During installation, creates %Windir%/CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. |
Removing the Update
This security update supports the following setup switches.
Supported Spuninst.exe Switches | |
Switch | Description |
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
• | Microsoft Baseline Security Analyzer To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information. | ||||||||||
• | File Version Verification Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.
|
• | Registry Key Verification You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section. These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files. |
Top of section
Top of section
sID='4l2-EYOAE';writePM(sID) | startA('s'+sID)Windows XP (all editions)endA() |
Reference Table
The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.
Inclusion in Future Service Packs | The update for this issue will be included in a future service pack or update rollup |
Deployment | |
Installing without user intervention | For all supported 32-bit editions of Windows XP: WindowsXP-KB945553-x86-ENU.exe /quiet |
For all supported x64-based editions of Windows XP: Windowsserver2003.Windows XP-KB945553-x64-ENU.exe /quiet | |
Installing without restarting | For all supported 32-bit editions of Windows XP: WindowsXP-KB945553-x86-ENU.exe /norestart |
For all supported x64-based editions of Windows XP: Windowsserver2003.Windows XP-KB945553-x64-ENU.exe /norestart | |
Update log file | KB945553.log |
Further information | See the subsection, Detection and Deployment Tools and Guidance |
Restart Requirement | |
Restart required? | Yes, you must restart your system after you apply this security update |
Hotpatching | Not applicable |
Removal Information | Use Add or Remove Programs tool in Control Panel or the SP uninstall tool at %Windir%/$NTUninstallKB945553$/Spuninst |
File Information | See Microsoft Knowledge Base Article 945553 |
Registry Key Verification | For all supported 32-bit versions of Windows XP: HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Updates/Windows XP/SP3/KB945553/Filelist |
For all supported x64-based editions of Windows XP: HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Updates/Windows XP Version 2003/SP3/KB945553/Filelist |
sID='4l3-EOSAE';writePM(sID) | startA('s'+sID) Deployment Information endA() |
Installing the Update
When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.
If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.
For more information about the installer, visit the Microsoft TechNet Web site.
For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
This security update supports the following setup switches.
Supported Security Update Installation Switches | |
Switch | Description |
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/overwriteoem | Overwrites OEM files without prompting |
/nobackup | Does not back up files needed for uninstall |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
/integrate:path | Integrates the update into the Windows source files. These files are located at the path that is specified in the switch. |
/extract[:path] | Extracts files without starting the Setup program |
/ER | Enables extended error reporting |
/verbose | Enables verbose logging. During installation, creates %Windir%/CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. |
Removing the Update
This security update supports the following setup switches.
Supported Spuninst.exe Switches | |
Switch | Description |
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
• | Microsoft Baseline Security Analyzer To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information. | ||||||||||
• | File Version Verification Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.
|
• | Registry Key Verification You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section. These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files. |
Top of section
Top of section
sID='4l2-EE4AE';writePM(sID) | startA('s'+sID)Microsoft Windows Server 2003 (all editions)endA() |
Reference Table
The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.
Inclusion in Future Service Packs | The update for this issue may be included in a future update rollup |
Deployment | |
Installing without user intervention | For all supported 32-bit editions of Windows Server 2003: Windowsserver2003-kb945553-x86-enu /quiet For all supported Itanium-based editions of Windows Server 2003: WindowsServer2003-KB945553-ia64-enu /quiet For all supported x64-based editions of Windows Server 2003: WindowsServer2003.WindowsXP-KB945553-x64-enu /quiet |
Installing without restarting | For all supported 32-bit editions of Windows Server 2003: Windowsserver2003-kb945553-x86-enu /norestart For all supported Itanium-based editions of Windows Server 2003: WindowsServer2003-KB945553-ia64-enu /norestart For all supported x64-based editions of Windows Server 2003: WindowsServer2003.WindowsXP-KB945553-x64-enu /norestart |
Further information | See the subsection, Detection and Deployment Tools and Guidance |
Update Log File | KB945553.log |
Restart Requirement | |
Restart required? | Yes, you must restart your system after you apply this security update. See Restart Note below for more information. |
Hotpatching | This security update does not support HotPatching. For more information about HotPatching see Microsoft Knowledge Base Article 897341. |
Removal Information | For all supported 32-bit editions, x64-based editions, and Itanium-based editions of Windows Server 2003: Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the Use the Spuninst.exe utility, located in the %Windir%/$NTUninstallKB945553$/Spuninst folder |
File Information | See Microsoft Knowledge Base Article 945553 |
Registry Key Verification | For all supported 32-bit editions, x64-based editions, and Itanium-based editions of Windows Server 2003: HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Updates/Windows Server 2003/SP3/KB945553/Filelist |
sID='4l3-EOBAG';writePM(sID) | startA('s'+sID) Deployment Information endA() |
Installing the Update
When you install this security update, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.
For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
This security update supports the following setup switches.
Supported Security Update Installation Switches | |
Switch | Description |
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/overwriteoem | Overwrites OEM files without prompting |
/nobackup | Does not back up files needed for uninstall |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
/integrate:path | Integrates the update into the Windows source files. These files are located at the path that is specified in the switch. |
/extract[:path] | Extracts files without starting the Setup program |
/ER | Enables extended error reporting |
/verbose | Enables verbose logging. During installation, creates %Windir%/CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. |
Removing the Update
This security update supports the following setup switches.
Supported Spuninst.exe Switches | |
Switch | Description |
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
• | Microsoft Baseline Security Analyzer To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information. | ||||||||||
• | File Version Verification Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.
|
• | Registry Key Verification You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section. These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files. |
Top of section
Top of section
sID='4l2-ECMAG';writePM(sID) | startA('s'+sID)Windows Vista (all editions)endA() |
Reference Table
The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.
Inclusion in Future Service Packs | The update for this issue will be included in a future service pack or update rollup |
Deployment | |
Installing without user intervention | All supported 32-bit editions of Windows Vista: Windows6.0-KB945553-x86 /quiet |
All supported x64-based editions of Windows Vista: Windows6.0-KB945553-x64 /quiet | |
Installing without restarting | All supported 32-bit editions of Windows Vista: Windows6.0-KB945553-x86 /quiet /norestart |
All supported x64-based editions of Windows Vista: Windows6.0-KB945553-x64 /quiet /norestart | |
Further information | See the subsection, Detection and Deployment Tools and Guidance |
Restart Requirement | |
Restart required? | Yes, you must restart your system after you apply this security update |
Hotpatching | Not applicable. |
Removal Information | WUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates. |
File Information | See Microsoft Knowledge Base Article 945553 |
sID='4l3-ESPAG';writePM(sID) | startA('s'+sID) Deployment Information endA() |
Installing the Update
When you install this security update, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.
For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
This security update supports the following setup switches.
Supported Security Update Installation Switches | |
Switch | Description |
/?, /h, /help | Displays help on supported switches. |
/quiet | Suppresses the display of status or error messages. |
/norestart | When combined with /quiet, the system will not be restarted after installation even if a restart is required to complete installation. |
Verifying that the Update Has Been Applied
• | Microsoft Baseline Security Analyzer To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information | ||||||||||
• | File Version Verification Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.
|
Top of section
Top of section
Top of section
Other Information
sID='5l1-EUTAG'Acknowledgments
Microsoft thanks the following for working with us to help protect customers:• | Amit Klein of Trusteer for reporting the DNS Spoofing Attack Vulnerability – (CVE-2008-0087). |
• | Alla Berzroutchko of Scanit for reporting the DNS Spoofing Attack Vulnerability – (CVE-2008-0087). |
• | Roy Arends of Nominet UK for reporting the DNS Spoofing Attack Vulnerability – (CVE-2008-0087). |
Top of section
sID='5l1-ETUAG'
Support
• | Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates. |
• | International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site. |
Top of section
sID='5l1-EFVAG'
Disclaimer
The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.Top of section
sID='5l1-EIVAG'
Revisions
• | V1.0 (April 8, 2008): Bulletin published. |
• | V1.1 (April 9, 2008): Bulletin updated to add Windows Vista x64 Edition to the list of affected software in the Executive Summary. |
• | V1.2 (April 11, 2008): Vulnerability FAQ updated to clarify the systems at risk and remove a reference to unsupported software. |
相关文章推荐
- 微软官方下周将发布5个补丁修复漏洞
- 我最近发现的微软官方网站以及SUN中国社区的五个翻译错误
- 微软官方补丁6B BUG造成WIN7系统蓝屏解决方案
- ANI鼠标指针漏洞 微软官方补丁更新
- 微软官方ANI漏洞补丁下载(KB925902)
- 微软发布“极光”IE漏洞官方补丁 KB978207 MS10-002
- 前阵子爆发的FreeBSD漏洞终于发官方补丁了(rtld模块)
- 19年了!微软星期二补丁终于补上Windows 95漏洞
- 游戏安全资讯精选 2017年第十七期:2017年最值得关注的出海游戏公司,微软十二月“周二补丁日”一览,中小企业公有云网络安全保障体系和混合云搭建实践
- 微软官方对于最近 Windows 8 采购传言做出回应
- [重要关注] 微软在一月二十二日发行一个紧急安全补丁 (MS10-002)
- ANI漏洞微软官方补丁KB925902 下载
- 微软紧急升级预告 明日将发布“IE XML”漏洞官方补丁
- WannaCry蠕虫(CVE-2017-11780漏洞)不同系统版本微软官方补丁编号-参考链接
- 官方补丁要来了 极光0day迫使微软提前发布
- WINDOWS 7 X86专业版SP1后续补丁包20150901(微软官方下载地址列表)
- 五个新知识:微软SHA2补丁,亚信专业工具,微软官方文档,使用过期签名(附官方推荐链接),注意使用具有UAC的CMD
- 微软发布2010年第一个IE 0day、"极光"ie高危漏洞警告的解决办法和最新官方补丁下载地址
- 微软官方ANI漏洞补丁(KB925902)
- WINDOWS 7 X64专业版SP1后续补丁包20150901(微软官方下载地址列表)