WM5注册表设置
2006-12-22 17:19
155 查看
大量的838注册表设置
大量的838注册表设置
如果不喜欢手工设置的话可以用下面链接中的这个软件
http://www.3g365.com/thread-275372-1-1.html
• Increase FileSystem cache
To increase the file system cache:
HKLM/System/StorageManager/FATFS/CacheSize = 4096 (DWORD decimal)
To return the file system cache to zero:
HKLM/System/StorageManager/FATFS/CacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
• Increase FileSystem filter cache
To enable the file system filter cache, speeding up overall performance with file mangement:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize = 4096 (DWORD decimal)
To return the file system filter cache to zero:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
• Increase font cache
To increase the font cache, speeding up font rendering at the cost of a bit of memory:
HKLM/SYSTEM/GDI/GLYPHCACHE/limit = 16384 (DWORD decimal)
To change it back to the default:
HKLM/SYSTEM/GDI/GLYPHCACHE/limit = 8192 (DWORD decimal)
• Disable window animations
To disable window animations (minimizing/maximizing) and speed up performance of the UI a bit:
HKLM/SYSTEM/GWE/Animate = 0 (DWORD decimal)
And to switch them back on:
HKLM/SYSTEM/GWE/Animate = 1 (DWORD decimal)
• Disable menu animations
To disable menu animations (sliding in/out) and speed up performance of the UI a bit:
HKLM/SYSTEM/GWE/Menu/AniType = 0 (DWORD decimal)
To change it back to the default:
HKLM/SYSTEM/GWE/Menu/AniType = 6 (DWORD decimal)
• Enable FileSystem cache
To enable the FileSystem cache, speeding up overall performance at the risk of the cache not being written on a sudden reset:
HKLM/System/StorageManager/FATFS/EnableCache = 1 (DWORD decimal)
To disable again:
HKLM/System/StorageManager/FATFS/EnableCache = 0 (DWORD decimal)
Note that by default, the cache size is zero, and you will see no effect. See "Increase FileSystem cache" to incease the cache size!
• Enable ClearType in Landscape Mode
To enable ClearType in Landscape mode:
HKLM/System/GDI/ClearTypeSettings/OffOnRotation = 0 (DWORD decimal)
To disable:
HKLM/System/GDI/ClearTypeSettings/OffOnRotation = 1 (DWORD decimal)
Note that your PocketPC screen's LCD red/green/blue ordering required for proper ClearType display is only correct for Portrait display. You may or may not prefer to leave ClearType in Landscape mode disabled
• Change the thickness of scrollbars to 9
To change the thickness of the scrollbars at the right/bottom of documents larger than the screen, adjust...
For the horizontal (bottom) scrollbar:
HKLM/System/GWE/cyHScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM/System/GWE/cxVScr = 9 (DWORD decimal)
The default thickness is 13. You can set the value to pretty much anything you like
• Change the length of scrollbar arrow buttons to 9
To go with changing the thickness of the scrollbars, you may wish to change the length of the scrollbar arrow buttons...
For the horizontal (bottom) scrollbar arrows:
HKLM/System/GWE/cyVScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM/System/GWE/cxHScr = 9 (DWORD decimal)
The default length is 13. You can set the value to pretty much anything you like
• Increase FileSystem cache
To increase the file system cache:
HKLM/System/StorageManager/FATFS/CacheSize = 4096 (DWORD decimal)
To return the file system cache to zero:
HKLM/System/StorageManager/FATFS/CacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
• Increase FileSystem filter cache
To enable the file system filter cache, speeding up overall performance with file mangement:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize = 4096 (DWORD decimal)
To return the file system filter cache to zero:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
• Increase font cache
To increase the font cache, speeding up font rendering at the cost of a bit of memory:
HKLM/SYSTEM/GDI/GLYPHCACHE/limit = 16384 (DWORD decimal)
To change it back to the default:
HKLM/SYSTEM/GDI/GLYPHCACHE/limit = 8192 (DWORD decimal)
• Disable window animations
To disable window animations (minimizing/maximizing) and speed up performance of the UI a bit:
HKLM/SYSTEM/GWE/Animate = 0 (DWORD decimal)
And to switch them back on:
HKLM/SYSTEM/GWE/Animate = 1 (DWORD decimal)
• Disable menu animations
To disable menu animations (sliding in/out) and speed up performance of the UI a bit:
HKLM/SYSTEM/GWE/Menu/AniType = 0 (DWORD decimal)
To change it back to the default:
HKLM/SYSTEM/GWE/Menu/AniType = 6 (DWORD decimal)
• Enable FileSystem cache
To enable the FileSystem cache, speeding up overall performance at the risk of the cache not being written on a sudden reset:
HKLM/System/StorageManager/FATFS/EnableCache = 1 (DWORD decimal)
To disable again:
HKLM/System/StorageManager/FATFS/EnableCache = 0 (DWORD decimal)
Note that by default, the cache size is zero, and you will see no effect. See "Increase FileSystem cache" to incease the cache size!
• Enable ClearType in Landscape Mode
To enable ClearType in Landscape mode:
HKLM/System/GDI/ClearTypeSettings/OffOnRotation = 0 (DWORD decimal)
To disable:
HKLM/System/GDI/ClearTypeSettings/OffOnRotation = 1 (DWORD decimal)
Note that your PocketPC screen's LCD red/green/blue ordering required for proper ClearType display is only correct for Portrait display. You may or may not prefer to leave ClearType in Landscape mode disabled
• Change the thickness of scrollbars to 9
To change the thickness of the scrollbars at the right/bottom of documents larger than the screen, adjust...
For the horizontal (bottom) scrollbar:
HKLM/System/GWE/cyHScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM/System/GWE/cxVScr = 9 (DWORD decimal)
The default thickness is 13. You can set the value to pretty much anything you like
• Change the length of scrollbar arrow buttons to 9
To go with changing the thickness of the scrollbars, you may wish to change the length of the scrollbar arrow buttons...
For the horizontal (bottom) scrollbar arrows:
HKLM/System/GWE/cyVScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM/System/GWE/cxHScr = 9 (DWORD decimal)
The default length is 13. You can set the value to pretty much anything you like
• Enable 802.11g 54Mbps
To enable 802.11g set:
HKEY_LOCAL_MACHINE/COMM/TNETWLN1/PARMS "dot11SupportedRateMask"=dword:00000001
and add this key:
HKEY_LOCAL_MACHINE/COMM/TNETWLN1/PARMS "dot11SupportedRateMaskG"=dword:00000008
• Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM/Security/Policies/Policies/0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM/Security/Policies/Policies/0000101a = 0 (DWORD decimal)
Note that this makes it easier for any malware to install itself
• Don't delete CAB files after installing
An method of making WM5 keep the original .CAB file around after installing the application is by adding the "/nodelete" option to the Windows CE loader:
HKCR/cabfile/Shell/open/command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)
• Move "Temporary Internet Files" to 'Storage Card'
When browsing the web, pages and images are saved in the 'Temporary Internet Files' location. You can change this location to, for example, your Storage Card:
HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/Cache = "/Storage Card/cacheie" (REG_SZ string, no quotes)
To return to the original location:
HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/Cache = "/Windows/Profiles/guest/Temporary Internet Files" (REG_SZ string, no quotes)
• Enable CAPS Lock indicator
Ja, dat is uiteraard mogelijk. U heeft hier toegang tot via uw controle paneel.
• Improve Sound Quality of Speaker Phone
HKLM/Software/HTC/AUDIOGAIN(x)/RECEIVE_UPLINK_VOLUME = CC (DWORD hexadecimal)
HKLM/Software/HTC/AUDIOGAIN(x)/EARPHONE_UPLINK_VOLUME = CC (DWORD hexadecimal)
where 'x' = 0, 1, 2
• Turn SMS Delivery on
If you always want an SMS Delivery notification (see note below!), and are tired of ticking the 'Request message delivery notification' checkbox, set:
HKCU/Software/Microsoft/Inbox/Settings/SMSDeliveryNotify = 1 (DWORD decimal)
To disable again:
HKCU/Software/Microsoft/Inbox/Settings/SMSDeliveryNotify = 0 (DWORD decimal)
Note 1: Delivery notifications will depend on your and the recipient's operator network capabilities! Note 2: You can still override this with the regular checkbox.
• Enable Wireless Today Item?
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status, WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM/Software/Microsoft/Today/Items/"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
• Enable receiving of files over BlueTooth/IrDA
If you want to prevent receiving files over BlueTooth or IrDA, you can set the following value:
HKLM/Software/Microsoft/Obex/IsEnabled = 0 (DWORD decimal)
And to (re-)enable:
HKLM/Software/Microsoft/Obex/IsEnabled = 1 (DWORD decimal)
• Add time sync page to Phone Settings
To add a time sync page to your Phone Settings (Start > Settings > Phone > Options > Time Zones) , set the following:
HKLM/SOFTWARE/OEM/PhoneSetting/ShowTimeZonesPage = 1 (DWORD decimal)
And to remove again:
HKLM/SOFTWARE/OEM/PhoneSetting/ShowTimeZonesPage = 0 (DWORD decimal)
• Add a 'Disconnect' button (and Timer) to the "GPRS Balloon Tip"
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM/ControlPanel/Phone/Flags2 = 16 (DWORD decimal)
top
• Disables different GPRS/EDGE indicator icon
If your network provider supports the Edge network (and your device does as well), you can use the following to show a little 'E' icon instead of 'G' icon when connected to an Edge network:
HKLM/Drivers/BuiltIn/RIL/EnableDifferGprsEdgeIcon = 1 (DWORD decimal)
To disable again:
HKLM/Drivers/BuiltIn/RIL/EnableDifferGprsEdgeIcon = 0 (DWORD decimal)
Note that your device -and- your network operator need to support Edge, otherwise you won't see it. Also note that if you connect to GPRS, you will still see the 'G' icon.
• Show Lunar Calendar (showing a 'Month' view with the Lunar months/days)
You can add a Lunar Calendar mode to the Calendar view, showing a 'Month' view with the Lunar months/days.
HKLM/Software/Microsoft/Calendar/ShowLunarCalendar = 1 (DWORD decimal)
And to disable again:
HKLM/Software/Microsoft/Calendar/ShowLunarCalendar = 0 (DWORD decimal)
• Show All Day Event and tomorrow appointments on the Today Screen
If you wish to see tomorrow's Appointments on the Calendar Today item, set:
If you wish to see today's All Day event as well:
HKLM/Software/Microsoft/Today/Items/Calendar/Flags = 5 (DWORD decimal)
If you do not wish to see today's All Day event:
HKLM/Software/Microsoft/Today/Items/Calendar/Flags = 4 (DWORD decimal)
Other values (attainable through the "Options..." dialog for the Calendar Today item just as well):
0 = Show Upcoming Appointments
1 = Show Upcoming Appointments and today's "All Day" event
2 = Show Next Appointment
3 = Show Next Appointment and today's "All Day" event
It works out to the following binary structure:
Default Behavior: Show Upcoming Appointments
000
||'- Show "All Day" events (doesn't show tomorrow's "All Day" events)
|'- Show Next Appointment
'- Show Tomorrow's Appointments
To enable 802.11g set:
HKEY_LOCAL_MACHINE/COMM/TNETWLN1/PARMS "dot11SupportedRateMask"=dword:00000001
and add this key:
HKEY_LOCAL_MACHINE/COMM/TNETWLN1/PARMS "dot11SupportedRateMaskG"=dword:00000008
• Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM/Security/Policies/Policies/0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM/Security/Policies/Policies/0000101a = 0 (DWORD decimal)
Note that this makes it easier for any malware to install itself
• Don't delete CAB files after installing
An method of making WM5 keep the original .CAB file around after installing the application is by adding the "/nodelete" option to the Windows CE loader:
HKCR/cabfile/Shell/open/command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)
• Move "Temporary Internet Files" to 'Storage Card'
When browsing the web, pages and images are saved in the 'Temporary Internet Files' location. You can change this location to, for example, your Storage Card:
HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/Cache = "/Storage Card/cacheie" (REG_SZ string, no quotes)
To return to the original location:
HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/Cache = "/Windows/Profiles/guest/Temporary Internet Files" (REG_SZ string, no quotes)
• Enable CAPS Lock indicator
Ja, dat is uiteraard mogelijk. U heeft hier toegang tot via uw controle paneel.
• Improve Sound Quality of Speaker Phone
HKLM/Software/HTC/AUDIOGAIN(x)/RECEIVE_UPLINK_VOLUME = CC (DWORD hexadecimal)
HKLM/Software/HTC/AUDIOGAIN(x)/EARPHONE_UPLINK_VOLUME = CC (DWORD hexadecimal)
where 'x' = 0, 1, 2
• Turn SMS Delivery on
If you always want an SMS Delivery notification (see note below!), and are tired of ticking the 'Request message delivery notification' checkbox, set:
HKCU/Software/Microsoft/Inbox/Settings/SMSDeliveryNotify = 1 (DWORD decimal)
To disable again:
HKCU/Software/Microsoft/Inbox/Settings/SMSDeliveryNotify = 0 (DWORD decimal)
Note 1: Delivery notifications will depend on your and the recipient's operator network capabilities! Note 2: You can still override this with the regular checkbox.
• Enable Wireless Today Item?
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status, WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM/Software/Microsoft/Today/Items/"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
• Enable receiving of files over BlueTooth/IrDA
If you want to prevent receiving files over BlueTooth or IrDA, you can set the following value:
HKLM/Software/Microsoft/Obex/IsEnabled = 0 (DWORD decimal)
And to (re-)enable:
HKLM/Software/Microsoft/Obex/IsEnabled = 1 (DWORD decimal)
• Add time sync page to Phone Settings
To add a time sync page to your Phone Settings (Start > Settings > Phone > Options > Time Zones) , set the following:
HKLM/SOFTWARE/OEM/PhoneSetting/ShowTimeZonesPage = 1 (DWORD decimal)
And to remove again:
HKLM/SOFTWARE/OEM/PhoneSetting/ShowTimeZonesPage = 0 (DWORD decimal)
• Add a 'Disconnect' button (and Timer) to the "GPRS Balloon Tip"
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM/ControlPanel/Phone/Flags2 = 16 (DWORD decimal)
• Disables different GPRS/EDGE indicator icon
If your network provider supports the Edge network (and your device does as well), you can use the following to show a little 'E' icon instead of 'G' icon when connected to an Edge network:
HKLM/Drivers/BuiltIn/RIL/EnableDifferGprsEdgeIcon = 1 (DWORD decimal)
To disable again:
HKLM/Drivers/BuiltIn/RIL/EnableDifferGprsEdgeIcon = 0 (DWORD decimal)
Note that your device -and- your network operator need to support Edge, otherwise you won't see it. Also note that if you connect to GPRS, you will still see the 'G' icon.
• Show Lunar Calendar (showing a 'Month' view with the Lunar months/days)
You can add a Lunar Calendar mode to the Calendar view, showing a 'Month' view with the Lunar months/days.
HKLM/Software/Microsoft/Calendar/ShowLunarCalendar = 1 (DWORD decimal)
And to disable again:
HKLM/Software/Microsoft/Calendar/ShowLunarCalendar = 0 (DWORD decimal)
• Show All Day Event and tomorrow appointments on the Today Screen
If you wish to see tomorrow's Appointments on the Calendar Today item, set:
If you wish to see today's All Day event as well:
HKLM/Software/Microsoft/Today/Items/Calendar/Flags = 5 (DWORD decimal)
If you do not wish to see today's All Day event:
HKLM/Software/Microsoft/Today/Items/Calendar/Flags = 4 (DWORD decimal)
Other values (attainable through the "Options..." dialog for the Calendar Today item just as well):
0 = Show Upcoming Appointments
1 = Show Upcoming Appointments and today's "All Day" event
2 = Show Next Appointment
3 = Show Next Appointment and today's "All Day" event
It works out to the following binary structure:
Default Behavior: Show Upcoming Appointments
000
||'- Show "All Day" events (doesn't show tomorrow's "All Day" events)
|'- Show Next Appointment
'- Show Tomorrow's Appointments
大量的838注册表设置
如果不喜欢手工设置的话可以用下面链接中的这个软件
http://www.3g365.com/thread-275372-1-1.html
• Increase FileSystem cache
To increase the file system cache:
HKLM/System/StorageManager/FATFS/CacheSize = 4096 (DWORD decimal)
To return the file system cache to zero:
HKLM/System/StorageManager/FATFS/CacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
• Increase FileSystem filter cache
To enable the file system filter cache, speeding up overall performance with file mangement:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize = 4096 (DWORD decimal)
To return the file system filter cache to zero:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
• Increase font cache
To increase the font cache, speeding up font rendering at the cost of a bit of memory:
HKLM/SYSTEM/GDI/GLYPHCACHE/limit = 16384 (DWORD decimal)
To change it back to the default:
HKLM/SYSTEM/GDI/GLYPHCACHE/limit = 8192 (DWORD decimal)
• Disable window animations
To disable window animations (minimizing/maximizing) and speed up performance of the UI a bit:
HKLM/SYSTEM/GWE/Animate = 0 (DWORD decimal)
And to switch them back on:
HKLM/SYSTEM/GWE/Animate = 1 (DWORD decimal)
• Disable menu animations
To disable menu animations (sliding in/out) and speed up performance of the UI a bit:
HKLM/SYSTEM/GWE/Menu/AniType = 0 (DWORD decimal)
To change it back to the default:
HKLM/SYSTEM/GWE/Menu/AniType = 6 (DWORD decimal)
• Enable FileSystem cache
To enable the FileSystem cache, speeding up overall performance at the risk of the cache not being written on a sudden reset:
HKLM/System/StorageManager/FATFS/EnableCache = 1 (DWORD decimal)
To disable again:
HKLM/System/StorageManager/FATFS/EnableCache = 0 (DWORD decimal)
Note that by default, the cache size is zero, and you will see no effect. See "Increase FileSystem cache" to incease the cache size!
• Enable ClearType in Landscape Mode
To enable ClearType in Landscape mode:
HKLM/System/GDI/ClearTypeSettings/OffOnRotation = 0 (DWORD decimal)
To disable:
HKLM/System/GDI/ClearTypeSettings/OffOnRotation = 1 (DWORD decimal)
Note that your PocketPC screen's LCD red/green/blue ordering required for proper ClearType display is only correct for Portrait display. You may or may not prefer to leave ClearType in Landscape mode disabled
• Change the thickness of scrollbars to 9
To change the thickness of the scrollbars at the right/bottom of documents larger than the screen, adjust...
For the horizontal (bottom) scrollbar:
HKLM/System/GWE/cyHScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM/System/GWE/cxVScr = 9 (DWORD decimal)
The default thickness is 13. You can set the value to pretty much anything you like
• Change the length of scrollbar arrow buttons to 9
To go with changing the thickness of the scrollbars, you may wish to change the length of the scrollbar arrow buttons...
For the horizontal (bottom) scrollbar arrows:
HKLM/System/GWE/cyVScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM/System/GWE/cxHScr = 9 (DWORD decimal)
The default length is 13. You can set the value to pretty much anything you like
• Increase FileSystem cache
To increase the file system cache:
HKLM/System/StorageManager/FATFS/CacheSize = 4096 (DWORD decimal)
To return the file system cache to zero:
HKLM/System/StorageManager/FATFS/CacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
• Increase FileSystem filter cache
To enable the file system filter cache, speeding up overall performance with file mangement:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize = 4096 (DWORD decimal)
To return the file system filter cache to zero:
HKLM/System/StorageManager/Filters/fsreplxfilt/ReplStoreCacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
• Increase font cache
To increase the font cache, speeding up font rendering at the cost of a bit of memory:
HKLM/SYSTEM/GDI/GLYPHCACHE/limit = 16384 (DWORD decimal)
To change it back to the default:
HKLM/SYSTEM/GDI/GLYPHCACHE/limit = 8192 (DWORD decimal)
• Disable window animations
To disable window animations (minimizing/maximizing) and speed up performance of the UI a bit:
HKLM/SYSTEM/GWE/Animate = 0 (DWORD decimal)
And to switch them back on:
HKLM/SYSTEM/GWE/Animate = 1 (DWORD decimal)
• Disable menu animations
To disable menu animations (sliding in/out) and speed up performance of the UI a bit:
HKLM/SYSTEM/GWE/Menu/AniType = 0 (DWORD decimal)
To change it back to the default:
HKLM/SYSTEM/GWE/Menu/AniType = 6 (DWORD decimal)
• Enable FileSystem cache
To enable the FileSystem cache, speeding up overall performance at the risk of the cache not being written on a sudden reset:
HKLM/System/StorageManager/FATFS/EnableCache = 1 (DWORD decimal)
To disable again:
HKLM/System/StorageManager/FATFS/EnableCache = 0 (DWORD decimal)
Note that by default, the cache size is zero, and you will see no effect. See "Increase FileSystem cache" to incease the cache size!
• Enable ClearType in Landscape Mode
To enable ClearType in Landscape mode:
HKLM/System/GDI/ClearTypeSettings/OffOnRotation = 0 (DWORD decimal)
To disable:
HKLM/System/GDI/ClearTypeSettings/OffOnRotation = 1 (DWORD decimal)
Note that your PocketPC screen's LCD red/green/blue ordering required for proper ClearType display is only correct for Portrait display. You may or may not prefer to leave ClearType in Landscape mode disabled
• Change the thickness of scrollbars to 9
To change the thickness of the scrollbars at the right/bottom of documents larger than the screen, adjust...
For the horizontal (bottom) scrollbar:
HKLM/System/GWE/cyHScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM/System/GWE/cxVScr = 9 (DWORD decimal)
The default thickness is 13. You can set the value to pretty much anything you like
• Change the length of scrollbar arrow buttons to 9
To go with changing the thickness of the scrollbars, you may wish to change the length of the scrollbar arrow buttons...
For the horizontal (bottom) scrollbar arrows:
HKLM/System/GWE/cyVScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM/System/GWE/cxHScr = 9 (DWORD decimal)
The default length is 13. You can set the value to pretty much anything you like
• Enable 802.11g 54Mbps
To enable 802.11g set:
HKEY_LOCAL_MACHINE/COMM/TNETWLN1/PARMS "dot11SupportedRateMask"=dword:00000001
and add this key:
HKEY_LOCAL_MACHINE/COMM/TNETWLN1/PARMS "dot11SupportedRateMaskG"=dword:00000008
• Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM/Security/Policies/Policies/0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM/Security/Policies/Policies/0000101a = 0 (DWORD decimal)
Note that this makes it easier for any malware to install itself
• Don't delete CAB files after installing
An method of making WM5 keep the original .CAB file around after installing the application is by adding the "/nodelete" option to the Windows CE loader:
HKCR/cabfile/Shell/open/command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)
• Move "Temporary Internet Files" to 'Storage Card'
When browsing the web, pages and images are saved in the 'Temporary Internet Files' location. You can change this location to, for example, your Storage Card:
HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/Cache = "/Storage Card/cacheie" (REG_SZ string, no quotes)
To return to the original location:
HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/Cache = "/Windows/Profiles/guest/Temporary Internet Files" (REG_SZ string, no quotes)
• Enable CAPS Lock indicator
Ja, dat is uiteraard mogelijk. U heeft hier toegang tot via uw controle paneel.
• Improve Sound Quality of Speaker Phone
HKLM/Software/HTC/AUDIOGAIN(x)/RECEIVE_UPLINK_VOLUME = CC (DWORD hexadecimal)
HKLM/Software/HTC/AUDIOGAIN(x)/EARPHONE_UPLINK_VOLUME = CC (DWORD hexadecimal)
where 'x' = 0, 1, 2
• Turn SMS Delivery on
If you always want an SMS Delivery notification (see note below!), and are tired of ticking the 'Request message delivery notification' checkbox, set:
HKCU/Software/Microsoft/Inbox/Settings/SMSDeliveryNotify = 1 (DWORD decimal)
To disable again:
HKCU/Software/Microsoft/Inbox/Settings/SMSDeliveryNotify = 0 (DWORD decimal)
Note 1: Delivery notifications will depend on your and the recipient's operator network capabilities! Note 2: You can still override this with the regular checkbox.
• Enable Wireless Today Item?
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status, WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM/Software/Microsoft/Today/Items/"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
• Enable receiving of files over BlueTooth/IrDA
If you want to prevent receiving files over BlueTooth or IrDA, you can set the following value:
HKLM/Software/Microsoft/Obex/IsEnabled = 0 (DWORD decimal)
And to (re-)enable:
HKLM/Software/Microsoft/Obex/IsEnabled = 1 (DWORD decimal)
• Add time sync page to Phone Settings
To add a time sync page to your Phone Settings (Start > Settings > Phone > Options > Time Zones) , set the following:
HKLM/SOFTWARE/OEM/PhoneSetting/ShowTimeZonesPage = 1 (DWORD decimal)
And to remove again:
HKLM/SOFTWARE/OEM/PhoneSetting/ShowTimeZonesPage = 0 (DWORD decimal)
• Add a 'Disconnect' button (and Timer) to the "GPRS Balloon Tip"
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM/ControlPanel/Phone/Flags2 = 16 (DWORD decimal)
top
• Disables different GPRS/EDGE indicator icon
If your network provider supports the Edge network (and your device does as well), you can use the following to show a little 'E' icon instead of 'G' icon when connected to an Edge network:
HKLM/Drivers/BuiltIn/RIL/EnableDifferGprsEdgeIcon = 1 (DWORD decimal)
To disable again:
HKLM/Drivers/BuiltIn/RIL/EnableDifferGprsEdgeIcon = 0 (DWORD decimal)
Note that your device -and- your network operator need to support Edge, otherwise you won't see it. Also note that if you connect to GPRS, you will still see the 'G' icon.
• Show Lunar Calendar (showing a 'Month' view with the Lunar months/days)
You can add a Lunar Calendar mode to the Calendar view, showing a 'Month' view with the Lunar months/days.
HKLM/Software/Microsoft/Calendar/ShowLunarCalendar = 1 (DWORD decimal)
And to disable again:
HKLM/Software/Microsoft/Calendar/ShowLunarCalendar = 0 (DWORD decimal)
• Show All Day Event and tomorrow appointments on the Today Screen
If you wish to see tomorrow's Appointments on the Calendar Today item, set:
If you wish to see today's All Day event as well:
HKLM/Software/Microsoft/Today/Items/Calendar/Flags = 5 (DWORD decimal)
If you do not wish to see today's All Day event:
HKLM/Software/Microsoft/Today/Items/Calendar/Flags = 4 (DWORD decimal)
Other values (attainable through the "Options..." dialog for the Calendar Today item just as well):
0 = Show Upcoming Appointments
1 = Show Upcoming Appointments and today's "All Day" event
2 = Show Next Appointment
3 = Show Next Appointment and today's "All Day" event
It works out to the following binary structure:
Default Behavior: Show Upcoming Appointments
000
||'- Show "All Day" events (doesn't show tomorrow's "All Day" events)
|'- Show Next Appointment
'- Show Tomorrow's Appointments
To enable 802.11g set:
HKEY_LOCAL_MACHINE/COMM/TNETWLN1/PARMS "dot11SupportedRateMask"=dword:00000001
and add this key:
HKEY_LOCAL_MACHINE/COMM/TNETWLN1/PARMS "dot11SupportedRateMaskG"=dword:00000008
• Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM/Security/Policies/Policies/0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM/Security/Policies/Policies/0000101a = 0 (DWORD decimal)
Note that this makes it easier for any malware to install itself
• Don't delete CAB files after installing
An method of making WM5 keep the original .CAB file around after installing the application is by adding the "/nodelete" option to the Windows CE loader:
HKCR/cabfile/Shell/open/command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)
• Move "Temporary Internet Files" to 'Storage Card'
When browsing the web, pages and images are saved in the 'Temporary Internet Files' location. You can change this location to, for example, your Storage Card:
HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/Cache = "/Storage Card/cacheie" (REG_SZ string, no quotes)
To return to the original location:
HKCU/Software/Microsoft/Windows/CurrentVersion/Explorer/Shell Folders/Cache = "/Windows/Profiles/guest/Temporary Internet Files" (REG_SZ string, no quotes)
• Enable CAPS Lock indicator
Ja, dat is uiteraard mogelijk. U heeft hier toegang tot via uw controle paneel.
• Improve Sound Quality of Speaker Phone
HKLM/Software/HTC/AUDIOGAIN(x)/RECEIVE_UPLINK_VOLUME = CC (DWORD hexadecimal)
HKLM/Software/HTC/AUDIOGAIN(x)/EARPHONE_UPLINK_VOLUME = CC (DWORD hexadecimal)
where 'x' = 0, 1, 2
• Turn SMS Delivery on
If you always want an SMS Delivery notification (see note below!), and are tired of ticking the 'Request message delivery notification' checkbox, set:
HKCU/Software/Microsoft/Inbox/Settings/SMSDeliveryNotify = 1 (DWORD decimal)
To disable again:
HKCU/Software/Microsoft/Inbox/Settings/SMSDeliveryNotify = 0 (DWORD decimal)
Note 1: Delivery notifications will depend on your and the recipient's operator network capabilities! Note 2: You can still override this with the regular checkbox.
• Enable Wireless Today Item?
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status, WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM/Software/Microsoft/Today/Items/"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
• Enable receiving of files over BlueTooth/IrDA
If you want to prevent receiving files over BlueTooth or IrDA, you can set the following value:
HKLM/Software/Microsoft/Obex/IsEnabled = 0 (DWORD decimal)
And to (re-)enable:
HKLM/Software/Microsoft/Obex/IsEnabled = 1 (DWORD decimal)
• Add time sync page to Phone Settings
To add a time sync page to your Phone Settings (Start > Settings > Phone > Options > Time Zones) , set the following:
HKLM/SOFTWARE/OEM/PhoneSetting/ShowTimeZonesPage = 1 (DWORD decimal)
And to remove again:
HKLM/SOFTWARE/OEM/PhoneSetting/ShowTimeZonesPage = 0 (DWORD decimal)
• Add a 'Disconnect' button (and Timer) to the "GPRS Balloon Tip"
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM/ControlPanel/Phone/Flags2 = 16 (DWORD decimal)
• Disables different GPRS/EDGE indicator icon
If your network provider supports the Edge network (and your device does as well), you can use the following to show a little 'E' icon instead of 'G' icon when connected to an Edge network:
HKLM/Drivers/BuiltIn/RIL/EnableDifferGprsEdgeIcon = 1 (DWORD decimal)
To disable again:
HKLM/Drivers/BuiltIn/RIL/EnableDifferGprsEdgeIcon = 0 (DWORD decimal)
Note that your device -and- your network operator need to support Edge, otherwise you won't see it. Also note that if you connect to GPRS, you will still see the 'G' icon.
• Show Lunar Calendar (showing a 'Month' view with the Lunar months/days)
You can add a Lunar Calendar mode to the Calendar view, showing a 'Month' view with the Lunar months/days.
HKLM/Software/Microsoft/Calendar/ShowLunarCalendar = 1 (DWORD decimal)
And to disable again:
HKLM/Software/Microsoft/Calendar/ShowLunarCalendar = 0 (DWORD decimal)
• Show All Day Event and tomorrow appointments on the Today Screen
If you wish to see tomorrow's Appointments on the Calendar Today item, set:
If you wish to see today's All Day event as well:
HKLM/Software/Microsoft/Today/Items/Calendar/Flags = 5 (DWORD decimal)
If you do not wish to see today's All Day event:
HKLM/Software/Microsoft/Today/Items/Calendar/Flags = 4 (DWORD decimal)
Other values (attainable through the "Options..." dialog for the Calendar Today item just as well):
0 = Show Upcoming Appointments
1 = Show Upcoming Appointments and today's "All Day" event
2 = Show Next Appointment
3 = Show Next Appointment and today's "All Day" event
It works out to the following binary structure:
Default Behavior: Show Upcoming Appointments
000
||'- Show "All Day" events (doesn't show tomorrow's "All Day" events)
|'- Show Next Appointment
'- Show Tomorrow's Appointments
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- 浏览器 通过注册表来设置修改默认浏览器的方法
- java 环境变量自动设置 注册表方法
- Win9X注册表内的安全和用户权限设置
- MFC程序设置自动启动，通过注册表实现（很详细的呃！）
- 禁止修改注册表，设置文件不被删除，隐藏“添加/删除
- 注册表设置IE代理
- 注册表设置开机启动
- WindowsXP系统的一些常用注册表设置
- 金蝶K3，域环境中，无本地用户管理员权限的域用户如何设置注册表权限?
- c#设置软件开机自动运行，修改注册表
- windows 9X, 2000, xp所有版本注册表设置
- [转]Wince应用程序开机自启动的注册表设置
- 使用Js脚本 修改控制IE的注册表相关设置(activex等)
- 使用注册表连接设置远程机开启远程桌面
- win7系统使用注册表清除顽固病毒的设置方法图文教程
- C#设置自定义文件图标实现双击启动(修改注册表)
- 如何使用组策略或注册表设置配置自动更新
- WEB打印设置 方案一（修改注册表改变IE打印设置）
- C#设置自定义文件图标实现双击启动(修改注册表)
- 注册表实用修改设置大权