如何使用MSN Chat Monitor & Sniffer?
2006-08-04 21:31
225 查看
MSN Chat Monitor & Sniffer FAQ
Q1: When I want to selected IP Address, there have not any adapter in list, how can I do?
Q2: Why I capture noting?
Q3: How can I capture packet on my LAN connected by a switch?
Q4: Please help me for configure port mirroring or SPAN to enable monitoring feature for my switch.
Q5: My switch doesn't support monitoring function. How can I do?
Q6: I can only monitor my own msn conversation in my pc not every pc in local network.Help.
Q7: No adapter can be finding in the software, how can I do?
Q1: When I want to selected IP Address, there have not any adapter in list, how can I do?
A1: Although the software can working fine on most network adapter, but it may cannot capture packet through some wireless network card, modem, PCMCIA card, USB card, or other special card. Try restarting your PC first after install the software
Q2: Why I capture noting?
A2: You can click menu "select Adapter" to set an adapter for capture packet. After you press "Start Capture" in toolbar, Your can try ever adapter, until find MSN packets number go up in the state bar if any people using MSN in time.
Q3: How can I capture packet on my LAN connected by a switch?
A3: In fact, switches prevent promiscuous sniffing, but very fortunately that most decent switches support SPAN," port mirroring", "management port" or similar feature, which allows network administrators to monitor LAN traffic on any computer connected to one designated switch port. You can configuration your switch with the documentation.
If your can do it until, please refer to Q5.
Q4: Please help me for configure port mirroring or SPAN to enable monitoring feature for my switch.
A4: You can check the documentation or get help from administrator, also ask the support of the manufacturer of your switch directly.
Q5: My switch doesn't support monitoring function. How can I do?
A5: If you can't or don't want to configure a management port for your switch, there are still several alternatives available.
Gateway: If possible please load the sniffed program on your special PC like your Internet gateway, proxy server or router. Any packet data will pass through the gateway, then the sniffed program can capture them.
ARP: Make some fake ARP packet and send it to your network to cheat your switch, then switch will forward net packet to other computers to your computer. But it is an inefficient and dangerous way.
HUB: Replace your switch with a common hub. If your Internet bandwidth is less than 5M (bps), downgrading will not have any negative impact on your Internet access.
Connected Internet by Router
Connected Internet by Gateway Proxy Server
Connected Internet by Gateway Proxy Server
Q6: I can only monitor my own msn conversation in my pc not every pc in local network. Help.
A6: If your network is connect with a switch, you can configure a management port for your switch. And connect your PC to that port of the switch. In addition. If you don't want to configure a management port for your switch,please refer to Q5.
Q7: No adapter can be finding in the software, how can I do?
A7: Please download WinPcap 3.1 beta 3 at http://www.winpcap.org/install/default.htm
Q1: When I want to selected IP Address, there have not any adapter in list, how can I do?
Q2: Why I capture noting?
Q3: How can I capture packet on my LAN connected by a switch?
Q4: Please help me for configure port mirroring or SPAN to enable monitoring feature for my switch.
Q5: My switch doesn't support monitoring function. How can I do?
Q6: I can only monitor my own msn conversation in my pc not every pc in local network.Help.
Q7: No adapter can be finding in the software, how can I do?
Q1: When I want to selected IP Address, there have not any adapter in list, how can I do?
A1: Although the software can working fine on most network adapter, but it may cannot capture packet through some wireless network card, modem, PCMCIA card, USB card, or other special card. Try restarting your PC first after install the software
Q2: Why I capture noting?
A2: You can click menu "select Adapter" to set an adapter for capture packet. After you press "Start Capture" in toolbar, Your can try ever adapter, until find MSN packets number go up in the state bar if any people using MSN in time.
Q3: How can I capture packet on my LAN connected by a switch?
A3: In fact, switches prevent promiscuous sniffing, but very fortunately that most decent switches support SPAN," port mirroring", "management port" or similar feature, which allows network administrators to monitor LAN traffic on any computer connected to one designated switch port. You can configuration your switch with the documentation.
If your can do it until, please refer to Q5.
Q4: Please help me for configure port mirroring or SPAN to enable monitoring feature for my switch.
A4: You can check the documentation or get help from administrator, also ask the support of the manufacturer of your switch directly.
Q5: My switch doesn't support monitoring function. How can I do?
A5: If you can't or don't want to configure a management port for your switch, there are still several alternatives available.
Gateway: If possible please load the sniffed program on your special PC like your Internet gateway, proxy server or router. Any packet data will pass through the gateway, then the sniffed program can capture them.
ARP: Make some fake ARP packet and send it to your network to cheat your switch, then switch will forward net packet to other computers to your computer. But it is an inefficient and dangerous way.
HUB: Replace your switch with a common hub. If your Internet bandwidth is less than 5M (bps), downgrading will not have any negative impact on your Internet access.
Connected Internet by Router
Connected Internet by Gateway Proxy Server
Connected Internet by Gateway Proxy Server
Q6: I can only monitor my own msn conversation in my pc not every pc in local network. Help.
A6: If your network is connect with a switch, you can configure a management port for your switch. And connect your PC to that port of the switch. In addition. If you don't want to configure a management port for your switch,please refer to Q5.
Q7: No adapter can be finding in the software, how can I do?
A7: Please download WinPcap 3.1 beta 3 at http://www.winpcap.org/install/default.htm
相关文章推荐
- 如何优雅地使用 Sublime Text
- 如何使用PLSQL Developer从oracle…
- 如何使用C\C++实现文件的检索 ?
- Mac OSX & Windows上如何使用SWIG (c++ android 示例)
- HTTP协议及其POST与GET操作差异 & C#中如何使用POST、GET等
- 什么是最好的网站学习&如何使用Linux系统?
- 什么是最好的网站学习&如何使用Linux系统?
- (转)HTTP协议及其POST与GET操作差异 & C#中如何使用POST、GET等
- 如何在Linux使用Eclipse +&nb…
- 如何使用ASP.NET2.0的“嵌入的资源”
- 关于如何使用three.js的小教程<一>
- sql 2005如何使用被禁止的"xp_cmdshell"
- 3.1如何编写程序界面&3.2常见控件使用方法
- 使用MySQLWorkBench绘制ER图&&如何把已有的数据库导出ER模型
- 如何使用 Pie controls功能
- HTTP协议及其POST与GET操作差异 & C#中如何使用POST、GET等
- MonitorServer代码阅读笔记(一):使用sigaction( SIGPIPE, &sa, 0)避免写一个已关闭的socket导致进程退出
- HTTP协议及其POST与GET操作差异 & C#中如何使用POST、GET等
- 在PHP中如何实现国际化支持&nbsp;&nbsp;使用M…
- ABAP--如何在'REUSE_ALV_GRID_DISPLAY'使用自定义F4帮助,返回多个字段以及计算修改其他字段