您的位置:首页 > 运维架构 > Linux

如何测试Linux命令运行时间?

2020-04-05 11:25 851 查看
良许在工作中,写过一个 Shell 脚本,这个脚本可以从 4 个 NTP 服务器轮流获取时间,然后将最可靠的时间设置为系统时间。 因为我们对于时间的要求比较高,需要在短时间内就获取到正确的时间。所以我们就需要对这个脚本运行时间进行测试,看看从开始运行到正确设置时间需要花费多少时间。 其实在工作中,还有很多情况下需要测试一个脚本或者程序运行多少时间,特别是对于时间性要求比较高的系统更是如此。 对于时间的测试,我们可以用到一个命令:`time` 。下面我们就详细看看如何使用 time 命令来对脚本/命令进行测时。 #### 1. time 命令基本用法 time 命令最基本的用法,就是 `time + 命令` ,比如: ``` $ time ping baidu.com PING baidu.com (123.125.114.144) 56(84) bytes of data. 64 bytes from 123.125.114.144 (123.125.114.144): icmp_seq=1 ttl=56 time=2.83 ms 64 bytes from 123.125.114.144 (123.125.114.144): icmp_seq=2 ttl=56 time=2.77 ms ………… ^C --- baidu.com ping statistics --- 8 packets transmitted, 8 received, 0% packet loss, time 10818ms rtt min/avg/max/mdev = 2.765/2.808/2.862/0.039 ms real 0m11.173s user 0m0.004s sys 0m0.002s ``` 在结果里,`real` 表示从我们执行 ping 命令到最终按 ctrl+c 终止这段时间所耗费的时间;`user` 及 `sys` 分别表示 ping 命令在用户空间及内核空间所运行的时间。 #### 2. 将时间信息写入文件 如果我们想把时间信息直接写入到文件,而不是显示在屏幕上,那么我们可以使用 `-o` 选项,并指定写入的文件路径。 ``` $ /usr/bin/time -o /home/alvin/time-output.txt ping baidu.com ``` 执行这个命令后,ping 命令的输出结果依然会在终端里,而 time 命令的结果就写入到我们所指定的 time-output.txt 文件里。 `-o` 选项表示输出文件不存在就创建,如果存在的话就直接覆盖重写。如果我们不想覆盖重写,而是想追加在文件后面,我们可以使用 `-a` 选项。 ``` $ /usr/bin/time -a /home/smart/time-output.txt ping linoxide.com ``` #### 3. 显示更详细的时间信息 time 命令不带选项的话,显示的信息量比较少,如果我们想获得更详细的信息,那么我们可以使用 `-v` 选项。 ``` $ /usr/bin/time -v ping baidu.com PING baidu.com (123.125.114.144) 56(84) bytes of data. 64 bytes from 123.125.114.144 (123.125.114.144): icmp_seq=1 ttl=56 time=2.75 ms 64 bytes from 123.125.114.144 (123.125.114.144): icmp_seq=2 ttl=56 time=2.76 ms 64 bytes from 123.125.114.144 (123.125.114.144): icmp_seq=3 ttl=56 time=2.85 ms 64 bytes from 123.125.114.144 (123.125.114.144): icmp_seq=4 ttl=56 time=2.77 ms ^C --- baidu.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3300ms rtt min/avg/max/mdev = 2.751/2.785/2.851/0.075 ms Command being timed: "ping baidu.com" User time (seconds): 0.00 System time (seconds): 0.00 Percent of CPU this job got: 0% Elapsed (wall clock) time (h:mm:ss or m:ss): 0:03.64 Average shared text size (kbytes): 0 Average unshared data size (kbytes): 0 Average stack size (kbytes): 0 Average total size (kbytes): 0 Maximum resident set size (kbytes): 2140 Average resident set size (kbytes): 0 Major (requiring I/O) page faults: 0 Minor (reclaiming a frame) page faults: 626 Voluntary context switches: 10 Involuntary context switches: 0 Swaps: 0 File system inputs: 0 File system outputs: 0 Socket messages sent: 0 Socket messages received: 0 Signals delivered: 0 Page size (bytes): 4096 Exit status: 0 ``` 这个结果信息就相当详细了,我们可以获取到足够多我们所需要的信息。 #### 4. 自定义输出格式 默认情况下,time 命令只输出 real,usr,sys 三个内容,如果我们想要个性化一些,算定义它的输出格式,time 命令也是支持的。time 命令支持的格式有很多,如下所示: ``` C - Name and command line arguments used D - Average size of the process's unshared data area in kilobytes E - Elapsed time in a clock format F - Number of page faults I - Number of file system inputs by the process K - Average total memory use of the process in kilobytes M - Maximum resident set the size of the process during the lifetime in Kilobytes O - Number of file system outputs by the process P - Percentage of CPU that the job received R - Number of minor or recoverable page faults S - Total number of CPU seconds used by the system in kernel mode U - Total number of CPU seconds used by user mode W - Number of times the process was swapped out of main memory X - Average amount of shared text in the process Z - System's page size in kilobytes c - Number of times the process was context-switched e - Elapsed real time used by the process in seconds k - Number of signals delivered to the process p - Average unshared stack size of the process in kilobytes r - Number of socket messages received by the process s - Number of socket messages sent by the process t - Average resident set size of the process in kilobytes w - Number of time the process was context-switched voluntarily x - Exit status of the command ``` 如果我们想要输出以下这样的格式: ``` Elapsed Time = 0:01:00, Inputs 2, Outputs 1 ``` 我们可以这样自定义: ``` $ /usr/bin/time -f "Elapsed Time = %E, Inputs %I, Outputs %O" ping baidu.com PING baidu.com (220.181.38.148) 56(84) bytes of data. 64 bytes from 220.181.38.148 (220.181.38.148): icmp_seq=1 ttl=54 time=1.82 ms 64 bytes from 220.181.38.148 (220.181.38.148): icmp_seq=2 ttl=54 time=1.86 ms ^C --- baidu.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 1.825/1.859/1.879/0.056 ms Elapsed Time = 0:03.92, Inputs 0, Outputs 0 ``` 如果你想让输出的结果有换行,可以在对应的地方添加 `\n` ,比如: ``` $ /usr/bin/time -f "Elapsed Time = %E \n Inputs %I \n Outputs %O" ping baidu.com ``` 这样输出的结果就类似于这样: ``` Elapsed Time = 0:03.92 Inputs 0 Outputs 0 ``` #### 看完的都是真爱,点个赞再走呗?您的「三连」就是良许持续创作的最大动力! 1. 关注**原创**公众号「**良许Linux**」,第一时间获取最新Linux干货! 2. 公众号后台回复【资料】【面试】【简历】获取精选一线大厂面试、自我提升、简历等资料。 3. 关注我的博客:[lxlinux.net](http://www.lxlinux.net)
内容来自用户分享和网络整理,不保证内容的准确性,如有侵权内容,可联系管理员处理 点击这里给我发消息
标签: