Keepalived+Nginx+Tomcat 实现高可用Web集群的示例代码
2019-10-29 07:07
2371 查看
Keepalived+Nginx+Tomcat 实现高可用Web集群
一、Nginx的安装过程
1.下载Nginx安装包，安装依赖环境包
(1)安装 C++编译环境
yum -y install gcc #C++
(2)安装pcre
yum -y install pcre-devel
(3)安装zlib
yum -y install zlib-devel
(4)安装Nginx
定位到nginx 解压文件位置，执行编译安装命令
[root@localhost nginx-1.12.2]# pwd /usr/local/nginx/nginx-1.12.2 [root@localhost nginx-1.12.2]# ./configure && make && make install
(5)启动Nginx
安装完成后先寻找那安装完成的目录位置
[root@localhost nginx-1.12.2]# whereis nginx nginx: /usr/local/nginx [root@localhost nginx-1.12.2]#
进入Nginx子目录sbin启动Nginx
[root@localhost sbin]# ls nginx [root@localhost sbin]# ./nginx & [1] 5768 [root@localhost sbin]#
查看Nginx是否启动
或通过进程查看Nginx启动情况
[root@localhost sbin]# ps -aux|grep nginx root 5769 0.0 0.0 20484 608 ? Ss 14:03 0:00 nginx: master process ./nginx nobody 5770 0.0 0.0 23012 1620 ? S 14:03 0:00 nginx: worker process root 5796 0.0 0.0 112668 972 pts/0 R+ 14:07 0:00 grep --color=auto nginx [1]+ 完成 ./nginx [root@localhost sbin]#
到此Nginx安装完成并启动成功。
(6)Nginx快捷启动和开机启动配置
编辑Nginx快捷启动脚本【 注意Nginx安装路径 ， 需要根据自己的NGINX路径进行改动 】
[root@localhost init.d]# vim /etc/rc.d/init.d/nginx
#!/bin/sh
#
# nginx - this script starts and stops the nginx daemon
#
# chkconfig: - 85 15
# description: Nginx is an HTTP(S) server, HTTP(S) reverse \
# proxy and IMAP/POP3 proxy server
# processname: nginx
# config: /etc/nginx/nginx.conf
# config: /usr/local/nginx/conf/nginx.conf
# pidfile: /usr/local/nginx/logs/nginx.pid
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ "$NETWORKING" = "no" ] && exit 0
nginx="/usr/local/nginx/sbin/nginx"
prog=$(basename $nginx)
NGINX_CONF_FILE="/usr/local/nginx/conf/nginx.conf"
[ -f /etc/sysconfig/nginx ] && . /etc/sysconfig/nginx
lockfile=/var/lock/subsys/nginx
make_dirs() {
# make required directories
user=`$nginx -V 2>&1 | grep "configure arguments:" | sed 's/[^*]*--user=\([^ ]*\).*/\1/g' -`
if [ -z "`grep $user /etc/passwd`" ]; then
useradd -M -s /bin/nologin $user
fi
options=`$nginx -V 2>&1 | grep 'configure arguments:'`
for opt in $options; do
if [ `echo $opt | grep '.*-temp-path'` ]; then
value=`echo $opt | cut -d "=" -f 2`
if [ ! -d "$value" ]; then
# echo "creating" $value
mkdir -p $value && chown -R $user $value
fi
fi
done
}
start() {
[ -x $nginx ] || exit 5
[ -f $NGINX_CONF_FILE ] || exit 6
make_dirs
echo -n $"Starting $prog: "
daemon $nginx -c $NGINX_CONF_FILE
retval=$?
echo
[ $retval -eq 0 ] && touch $lockfile
return $retval
}
stop() {
echo -n $"Stopping $prog: "
killproc $prog -QUIT
retval=$?
echo
[ $retval -eq 0 ] && rm -f $lockfile
return $retval
}
restart() {
#configtest || return $?
stop
sleep 1
start
}
reload() {
#configtest || return $?
echo -n $"Reloading $prog: "
killproc $nginx -HUP
RETVAL=$?
echo
}
force_reload() {
restart
}
configtest() {
$nginx -t -c $NGINX_CONF_FILE
}
rh_status() {
status $prog
}
rh_status_q() {
rh_status >/dev/null 2>&1
}
case "$1" in
start)
rh_status_q && exit 0
$1
;;
stop)
rh_status_q || exit 0
$1
;;
restart|configtest)
$1
;;
reload)
rh_status_q || exit 7
$1
;;
force-reload)
force_reload
;;
status)
rh_status
;;
condrestart|try-restart)
rh_status_q || exit 0
;;
*)
echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}"
exit 2
esac
为启动脚本授权 并加入开机启动
[root@localhost init.d]# chmod -R 777 /etc/rc.d/init.d/nginx [root@localhost init.d]# chkconfig nginx
启动Nginx
[root@localhost init.d]# ./nginx start
将Nginx加入系统环境变量
[root@localhost init.d]# echo 'export PATH=$PATH:/usr/local/nginx/sbin'>>/etc/profile && source /etc/profile
Nginx命令 [ service nginx (start|stop|restart) ]
[root@localhost init.d]# service nginx start Starting nginx (via systemctl): [ 确定 ]
Tips: 快捷命令
service nginx (start|stop|restart)
二、KeepAlived安装和配置
1.安装Keepalived依赖环境
yum install -y popt-devel yum install -y ipvsadm yum install -y libnl* yum install -y libnf* yum install -y openssl-devel
2.编译Keepalived并安装
[root@localhost keepalived-1.3.9]# ./configure [root@localhost keepalived-1.3.9]# make && make install
3.将Keepalive 安装成系统服务
[root@localhost etc]# mkdir /etc/keepalived [root@localhost etc]# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
手动复制默认的配置文件到默认路径
[root@localhost etc]# mkdir /etc/keepalived [root@localhost etc]# cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/ [root@localhost etc]# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
为keepalived 创建软链接
[root@localhost sysconfig]# ln -s /usr/local/keepalived/sbin/keepalived /usr/sbin/
设置Keepalived开机自启动
[root@localhost sysconfig]# chkconfig keepalived on 注意：正在将请求转发到“systemctl enable keepalived.service”。 Created symlink from /etc/systemd/system/multi-user.target.wants/keepalived.service to /usr/lib/systemd/system/keepalived.service
启动Keepalived服务
[root@localhost keepalived]# keepalived -D -f /etc/keepalived/keepalived.conf
关闭Keepalived服务
[root@localhost keepalived]# killall keepalived
三、集群规划和搭建
环境准备：
CentOS 7.2
Keepalived Version 1.4.0 - December 29, 2017
Nginx Version: nginx/1.12.2
Tomcat Version:8
集群规划清单
| 虚拟机 | IP | 说明 |
|---|---|---|
| Keepalived+Nginx1[Master] | 192.168.43.101 | Nginx Server 01 |
| Keeepalived+Nginx[Backup] | 192.168.43.102 | Nginx Server 02 |
| Tomcat01 | 192.168.43.103 | Tomcat Web Server01 |
| Tomcat02 | 192.168.43.104 | Tomcat Web Server02 |
| VIP | 192.168.43.150 | 虚拟漂移IP |
1.更改Tomcat默认欢迎页面，用于标识切换Web
更改TomcatServer01 节点ROOT/index.jsp 信息，加入TomcatIP地址，并加入Nginx值，即修改节点192.168.43.103信息如下：
<div id="asf-box">
<h1>${pageContext.servletContext.serverInfo}(192.168.224.103)<%=request.getHeader("X-NGINX")%></h1>
</div>
更改TomcatServer02 节点ROOT/index.jsp信息，加入TomcatIP地址，并加入Nginx值，即修改节点192.168.43.104信息如下：
<div id="asf-box">
<h1>${pageContext.servletContext.serverInfo}(192.168.224.104)<%=request.getHeader("X-NGINX")%></h1>
</div>
2.启动Tomcat服务，查看Tomcat服务IP信息，此时Nginx未启动，因此request-header没有Nginx信息。
3.配置Nginx代理信息
1.配置Master节点[192.168.43.101]代理信息
upstream tomcat {
server 192.168.43.103:8080 weight=1;
server 192.168.43.104:8080 weight=1;
}
server{
location / {
proxy_pass http://tomcat;
proxy_set_header X-NGINX "NGINX-1";
}
#......其他省略
}
2.配置Backup节点[192.168.43.102]代理信息
upstream tomcat {
server 192.168.43.103:8080 weight=1;
server 192.168.43.104:8080 weight=1;
}
server{
location / {
proxy_pass http://tomcat;
proxy_set_header X-NGINX "NGINX-2";
}
#......其他省略
}
3.启动Master 节点Nginx服务
[root@localhost init.d]# service nginx start Starting nginx (via systemctl): [ 确定 ]
此时访问 192.168.43.101 可以看到103和104节点Tcomat交替显示，说明Nginx服务已经将请求负载到了2台tomcat上。
4.同理配置Backup[192.168.43.102] Nginx信息，启动Nginx后，访问192.168.43.102后可以看到Backup节点已起到负载的效果。
4.配置Keepalived 脚本信息
1. 在Master节点和Slave节点 /etc/keepalived目录下添加check_nginx.sh 文件，用于检测Nginx的存货状况，添加keepalived.conf文件
check_nginx.sh文件信息如下：
#!/bin/bash #时间变量，用于记录日志 d=`date --date today +%Y%m%d_%H:%M:%S` #计算nginx进程数量 n=`ps -C nginx --no-heading|wc -l` #如果进程为0，则启动nginx，并且再次检测nginx进程数量， #如果还为0，说明nginx无法启动，此时需要关闭keepalived if [ $n -eq "0" ]; then /etc/rc.d/init.d/nginx start n2=`ps -C nginx --no-heading|wc -l` if [ $n2 -eq "0" ]; then echo "$d nginx down,keepalived will stop" >> /var/log/check_ng.log systemctl stop keepalived fi fi
添加完成后，为check_nginx.sh 文件授权，便于脚本获得执行权限。
[root@localhost keepalived]# chmod -R 777 /etc/keepalived/check_nginx.sh
2.在Master 节点 /etc/keepalived目录下，添加keepalived.conf 文件，具体信息如下：
vrrp_script chk_nginx {
script "/etc/keepalived/check_nginx.sh" //检测nginx进程的脚本
interval 2
weight -20
}
global_defs {
notification_email {
//可以添加邮件提醒
}
}
vrrp_instance VI_1 {
state MASTER #标示状态为MASTER 备份机为BACKUP
interface ens33 #设置实例绑定的网卡(ip addr查看，需要根据个人网卡绑定)
virtual_router_id 51 #同一实例下virtual_router_id必须相同
mcast_src_ip 192.168.43.101
priority 250 #MASTER权重要高于BACKUP 比如BACKUP为240
advert_int 1 #MASTER与BACKUP负载均衡器之间同步检查的时间间隔，单位是秒
nopreempt #非抢占模式
authentication { #设置认证
auth_type PASS #主从服务器验证方式
auth_pass 123456
}
track_script {
check_nginx
}
virtual_ipaddress { #设置vip
192.168.43.150 #可以多个虚拟IP，换行即可
}
}
3.在Backup节点 etc/keepalived目录下添加 keepalived.conf 配置文件
信息如下：
vrrp_script chk_nginx {
script "/etc/keepalived/check_nginx.sh" //检测nginx进程的脚本
interval 2
weight -20
}
global_defs {
notification_email {
//可以添加邮件提醒
}
}
vrrp_instance VI_1 {
state BACKUP #标示状态为MASTER 备份机为BACKUP
interface ens33 #设置实例绑定的网卡(ip addr查看)
virtual_router_id 51 #同一实例下virtual_router_id必须相同
mcast_src_ip 192.168.43.102
priority 240 #MASTER权重要高于BACKUP 比如BACKUP为240
advert_int 1 #MASTER与BACKUP负载均衡器之间同步检查的时间间隔，单位是秒
nopreempt #非抢占模式
authentication { #设置认证
auth_type PASS #主从服务器验证方式
auth_pass 123456
}
track_script {
check_nginx
}
virtual_ipaddress { #设置vip
192.168.43.150 #可以多个虚拟IP，换行即可
}
}
Tips: 关于配置信息的几点说明
- state - 主服务器需配成MASTER，从服务器需配成BACKUP
- interface - 这个是网卡名，我使用的是VM12.0的版本，所以这里网卡名为ens33
- mcast_src_ip - 配置各自的实际IP地址
- priority - 主服务器的优先级必须比从服务器的高，这里主服务器配置成250，从服务器配置成240
- virtual_ipaddress - 配置虚拟IP（192.168.43.150）
- authentication - auth_pass主从服务器必须一致，keepalived靠这个来通信
- virtual_router_id - 主从服务器必须保持一致
5.集群高可用(HA)验证
Step1 启动Master机器的Keepalived和 Nginx服务
[root@localhost keepalived]# keepalived -D -f /etc/keepalived/keepalived.conf [root@localhost keepalived]# service nginx start
查看服务启动进程
[root@localhost keepalived]# ps -aux|grep nginx root 6390 0.0 0.0 20484 612 ? Ss 19:13 0:00 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf nobody 6392 0.0 0.0 23008 1628 ? S 19:13 0:00 nginx: worker process root 6978 0.0 0.0 112672 968 pts/0 S+ 20:08 0:00 grep --color=auto nginx
查看Keepalived启动进程
[root@localhost keepalived]# ps -aux|grep keepalived root 6402 0.0 0.0 45920 1016 ? Ss 19:13 0:00 keepalived -D -f /etc/keepalived/keepalived.conf root 6403 0.0 0.0 48044 1468 ? S 19:13 0:00 keepalived -D -f /etc/keepalived/keepalived.conf root 6404 0.0 0.0 50128 1780 ? S 19:13 0:00 keepalived -D -f /etc/keepalived/keepalived.conf root 7004 0.0 0.0 112672 976 pts/0 S+ 20:10 0:00 grep --color=auto keepalived
使用 ip add 查看虚拟IP绑定情况，如出现192.168.43.150 节点信息则绑定到Master节点
[root@localhost keepalived]# ip add 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:91:bf:59 brd ff:ff:ff:ff:ff:ff inet 192.168.43.101/24 brd 192.168.43.255 scope global ens33 valid_lft forever preferred_lft forever inet 192.168.43.150/32 scope global ens33 valid_lft forever preferred_lft forever inet6 fe80::9abb:4544:f6db:8255/64 scope link valid_lft forever preferred_lft forever inet6 fe80::b0b3:d0ca:7382:2779/64 scope link tentative dadfailed valid_lft forever preferred_lft forever inet6 fe80::314f:5fe7:4e4b:64ed/64 scope link tentative dadfailed valid_lft forever preferred_lft forever 3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 link/ether 52:54:00:2b:74:aa brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 valid_lft forever preferred_lft forever 4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 link/ether 52:54:00:2b:74:aa brd ff:ff:ff:ff:ff:ff
Step 2 启动Backup节点Nginx服务和Keepalived服务，查看服务启动情况，如Backup节点出现了虚拟IP，则Keepalvied配置文件有问题，此情况称为脑裂。
[root@localhost keepalived]# clear [root@localhost keepalived]# ip add 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:14:df:79 brd ff:ff:ff:ff:ff:ff inet 192.168.43.102/24 brd 192.168.43.255 scope global ens33 valid_lft forever preferred_lft forever inet6 fe80::314f:5fe7:4e4b:64ed/64 scope link valid_lft forever preferred_lft forever 3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 link/ether 52:54:00:2b:74:aa brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 valid_lft forever preferred_lft forever 4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 link/ether 52:54:00:2b:74:aa brd ff:ff:ff:ff:ff:ff
Step 3 验证服务
浏览并多次强制刷新地址： http://192.168.43.150 ,可以看到103和104多次交替显示，并显示Nginx-1,则表明 Master节点在进行web服务转发。
Step 4 关闭Master keepalived服务和Nginx服务，访问Web服务观察服务转移情况
[root@localhost keepalived]# killall keepalived [root@localhost keepalived]# service nginx stop
此时强制刷新192.168.43.150发现 页面交替显示103和104并显示Nginx-2 ，VIP已转移到192.168.43.102上，已证明服务自动切换到备份节点上。
Step 5 启动Master Keepalived 服务和Nginx服务
此时再次验证发现，VIP已被Master重新夺回，并页面交替显示 103和104，此时显示Nginx-1
四、Keepalived抢占模式和非抢占模式
keepalived的HA分为抢占模式和非抢占模式，抢占模式即MASTER从故障中恢复后，会将VIP从BACKUP节点中抢占过来。非抢占模式即MASTER恢复后不抢占BACKUP升级为MASTER后的VIP。
非抢占模式配置：
1> 在vrrp_instance块下两个节点各增加了nopreempt指令，表示不争抢vip
2> 节点的state都为BACKUP 两个keepalived节点都启动后，默认都是BACKUP状态，双方在发送组播信息后，会根据优先级来选举一个MASTER出来。由于两者都配置了nopreempt，所以MASTER从故障中恢复后，不会抢占vip。这样会避免VIP切换可能造成的服务延迟。
以上就是本文的全部内容，希望对大家的学习有所帮助
您可能感兴趣的文章:
内容来自用户分享和网络整理，不保证内容的准确性，如有侵权内容，可联系管理员处理 
相关文章推荐
- nginx+keepalived+tomcat配置高可用web集群
- 大型网站分布式架构（十一）—— Keepalived+Nginx+Tomcat集群实现服务的高可用HA
- Centos 7部署docker+nginx+keepalived实现高可用web集群
- Nginx+Keepalived实现Nginx负载均衡及高可用WEB服务器集群
- Keepalived+Nginx+Redis+Tomcat实现高可用web负载均衡
- Nginx+Keepalived+Tomcat之动静分离的web集群
- 【Linux运维-集群技术进阶】Nginx+Tomcat实现Web服务器的负载均衡
- LVS+Keepalived+Nginx+Tomcat高可用负载均衡集群配置（DR模式，一个VIP，多个端口）
- keepalived+nginx+tomcat搭建高性能web服务器集群
- Apache+tomcat实现高可用WEB集群
- Linux+Nginx+Tomcat实现Web服务器的负载均衡集群
- Keepalived+Nginx+Tomcat搭建高可用的Web服务（一）：主备模式
- LVS+KEEPALIVED+WEB实现高可用负载均衡集群
- Keepalived + Nginx实现高可用Web负载均衡
- 分布式架构高可用架构篇_04_Keepalived+Nginx实现高可用Web负载均衡
- Keepalived+LVS实现web高可用负载集群
- linux上keepalived+nginx实现高可用web负载均衡
- Windows环境下，Nginx+tomcat+redis实现web项目集群
- Keepalived+Nginx 实现web高可用
- Keepalived+Nginx实现高可用负载均衡集群