您的位置:首页 > 其它

ACL扩展访问控制列表详解

2019-10-15 22:51 1231 查看

本章实验:

允许win10-1访问linux的web服务

禁止win10-1访问linux的其他服务

允许win10访问win10-2主机

ACL扩展访问控制列表详解

1.配置GNS3

三台主机,一台路由器
win10 -1 :绑定VMnet1网卡
win10-2:绑定VMnet2网卡
linux:绑定VMnet8网卡作为测试
f0/0:192.168.1.1/24
f1/0:192.168.2.1/24
f10/1:192.168.100.1/24

2.配置linux服务器,安装两个服务VSFTPD,HTTPD

[root@localhost ~]# yum install vsftpd -y
已加载插件:fastestmirror, langpacks
Loading mirror speeds from cached hostfile
* base: mirrors.163.com
* extras: mirrors.cn99.com
* updates: mirrors.cn99.com
正在解决依赖关系
--> 正在检查事务
---> 软件包 vsftpd.x86_64.0.3.0.2-25.el7 将被 安装
--> 解决依赖关系完成

[root@localhost ~]# yum install httpd -y
已加载插件:fastestmirror, langpacks
Loading mirror speeds from cached hostfile
* base: mirrors.163.com
* extras: mirrors.cn99.com
* updates: mirrors.cn99.com
正在解决依赖关系
--> 正在检查事务

3.把linux服务器绑定VMnet8网卡

4.把linux服务器设置静态IP地址

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33

TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=849aa04e-1874-490f-8cb0-b2fde4b9a6f8
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.100.100
NETMASK=255.255.255.0
GATEWAY=192.168.100.1

[root@localhost ~]# systemctl restart network

重启linux服务器

5.给win10 -1和win10 -2绑定网卡

6.win10-2设置固定IP地址

7.win10-1设置固定IP地址

8.回到GNS3给接口配置地址

R1#conf t
R1(config)#int f0/0
R1(config-if)#ip add 192.168.1.1 255.255.255.0
R1(config-if)#no shut
R1(config-if)#int f0/1
R1(config-if)#ip add 192.168.100.1 255.255.255.0
R1(config-if)#no shut
R1(config-if)#int f1/0
R1(config-if)#ip add 192.168.2.1 255.255.255.0
R1(config-if)#no shut
R1(config-if)#ex
R1(config)#do show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

C    192.168.1.0/24 is directly connected, FastEthernet0/0
C    192.168.2.0/24 is directly connected, FastEthernet1/0
C    192.168.100.0/24 is directly connected, FastEthernet0/1

9.把win10 -1和win10-2防火墙都关掉

10.用win10-2去pingwin 10 -1,看看能不能连通

C:\Users\CHEN>ping 192.168.1.2

正在 Ping 192.168.1.2 具有 32 字节的数据:
来自 192.168.1.2 的回复: 字节=32 时间=19ms TTL=127
来自 192.168.1.2 的回复: 字节=32 时间=18ms TTL=127
来自 192.168.1.2 的回复: 字节=32 时间=14ms TTL=127
来自 192.168.1.2 的回复: 字节=32 时间=15ms TTL=127

11.linux开启两个服务,并写两个文件内容

root@localhost chen]# systemctl stop firewalld.service
root@localhost chen]# setenforce 0
[root@localhost chen]# cd /var/www/html
[root@localhost html]# vim index.html
<h1>this is test web</h1>
[root@localhost html]# ls
index.html
[root@localhost html]# systemctl start httpd
[root@localhost html]# systemctl start vsftpd
[root@localhost html]# cd /var/ftp
[root@localhost ftp]# ls
pub
[root@localhost ftp]# echo "this is ftp" > ftp.txt
[root@localhost ftp]# ls
ftp.txt  pub
[root@localhost html]# netstat -nuap | egrep '(21|80)'
udp        0      0 192.168.122.1:53        0.0.0.0:*                           1380/dnsmasq
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1380/dnsmasq

12.去win10-1测试能不能访问192.168.100.100两个服务是不是都能访问

13.回到GNS3开始配置ACL扩展访问控制列表

R1#conf t
R1(config)#access-list 100 permit tcp host 192.168.1.2 host   192.168.100.100 eq www
//扩展的序列号100-199,允许tcp协议,固定地址192.168.1.2去访问
192.168.100.100 后面跟端口号80也可以是名字
R1(config)#do show access-list  //查看访问控制列表
Extended IP access list 100
10 permit tcp host 192.168.1.2 host 192.168.100.100 eq www
R1(config)#access-list 100 deny ip host 192.168.1.2 host 192.168.100.100
R1(config)#do show access-list
Extended IP access list 100
10 permit tcp host 192.168.1.2 host 192.168.100.100 eq www
20 deny ip host 192.168.1.2 host 192.168.100.100
R1(config)#access-list 100 permit ip host 192.168.1.2 192.168.2.0 0.0.0.255
R1(config)#do show access-list
Extended IP access list 100
10 permit tcp host 192.168.1.2 host 192.168.100.100 eq www
20 deny ip host 192.168.1.2 host 192.168.100.100
30 permit ip host 192.168.1.2 192.168.2.0 0.0.0.255
R1(config-if)#ip access-group 100 in  //应用在接口,离限制方最近的端口,是入口方向。

ACL扩展访问控制列表配置好后,测试win10-1能不能访问ftp服务

我们的实验就成功了

内容来自用户分享和网络整理,不保证内容的准确性,如有侵权内容,可联系管理员处理 点击这里给我发消息
标签: