PB级数据实现秒级查询ES的安装

• 本教程使用软件为6.4.3版本

  下载

  ElasticSearch：

  https://www.elastic.co/cn/downloads/elasticsearch

Kibana:

上传至Linux服务器

略

解压并修改配置文件

# 注意：需要使用普通用户操作ES，不可使用root用户进行操作。

#使用root用户，添加用户
#添加用户命令：
[root@hadoop137 ~]# useradd shaofei
[root@hadoop137 ~]# passwd shaofei
更改用户 shaofei的密码 。
新的 密码：
无效的密码： 过于简单化/系统化
无效的密码： 过于简单
重新输入新的 密码：
passwd： 所有的身份验证令牌已经成功更新。

#切换为shaofei用户：
[root@hadoop137 ~]# su shaofei
[shaofei@hadoop137 root]$ cd
[shaofei@hadoop137 ~]$

# 解压elasticsearch
[shaofei@hadoop137 softwear]$ tar -zxvf elasticsearch-6.4.3.tar.gz -C ../module/
[shaofei@hadoop137 elasticsearch-6.4.3]$ pwd
/opt/module/elasticsearch-6.4.3

# 修改配置文件
[shaofei@hadoop137 elasticsearch-6.4.3]$ vim config/elasticsearch.yml
# 注意修改yml文件时，配置项后面要空格

elasticsearch.yml

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
# 修改集群名称
cluster.name: myes
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
# 修改当前节点名称——下一步分发到其他集群时需要修改
node.name: hadoop137
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
# 当前节点的ip地址，我这里配置了hosts文件所以写了主机名称——下一步分发之后需要修改为对应主机的ip地址
network.host: hadoop137
#
# Set a custom port for HTTP:
# ES对外开放服务的端口号
http.port: 9200
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when new node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
#discovery.zen.ping.unicast.hosts: ["host1", "host2"]
#
# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
#
#discovery.zen.minimum_master_nodes:
#
# For more information, consult the zen discovery module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true

#添加集群ip地址
discovery.zen.ping.unicast.hosts: ["192.168.23.137", "192.168.23.138", "192.168.23.139"]

分发各个集群中的其他主机

[shaofei@hadoop137 module]$ rsync -rvl elasticsearch-6.4.3 shaofei@hadoop138:`pwd`
[shaofei@hadoop137 module]$ rsync -rvl elasticsearch-6.4.3 shaofei@hadoop139:`pwd`

分别启动集群中的ES

[shaofei@hadoop137 elasticsearch-6.4.3]$ ./bin/elasticsearch

[shaofei@hadoop138 elasticsearch-6.4.3]$ ./bin/elasticsearch

[shaofei@hadoop139 elasticsearch-6.4.3]$ ./bin/elasticsearch

启动中遇到的问题：

对于第【1】个问题：
[root@hadoop139 shaofei]# vi /etc/security/limits.conf
末尾添加：
# End of file

* soft nofile 65536

* hard nofile 131072

* soft nproc 2048

* hard nproc 4096

对于第【2】个问题：
[root@hadoop139 shaofei]# vim /etc/security/limits.d/90-nproc.conf
修改：
[root@hadoop139 shaofei]# cat /etc/security/limits.d/90-nproc.conf
# Default limit for number of user's processes to prevent
# accidental fork bombs.
# See rhbz #432903 for reasoning.

*          soft    nproc     10240
root       soft    nproc     unlimited

# 重新登陆用户即可

对于第【3】个问题：
vi /etc/sysctl.conf
添加下面配置：
vm.max_map_count=655360

并执行命令：
sysctl -p

# 修改elasticsearch.yml 添加一下内容

bootstrap.memory_lock: false
bootstrap.system_call_filter: false

问题解决之后重新启动es即可。

• 启动成功

访问：http://ip:9200

安装kibana

• 下载安装包
• 解压
• 修改配置文件

kibana.yml

# Kibana is served by a back end server. This setting specifies the port to use.
# 配置端口
server.port: 5601

# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
# The default is 'localhost', which usually means remote machines will not be able to connect.
# To allow connections from remote users, set this parameter to a non-loopback address.
# 配置主机ip
server.host: "hadoop137"

# Enables you to specify a path to mount Kibana at if you are running behind a proxy.
# Use the `server.rewriteBasePath` setting to tell Kibana if it should remove the basePath
# from requests it receives, and to prevent a deprecation warning at startup.
#
576
This setting cannot end in a slash.
#server.basePath: ""

# Specifies whether Kibana should rewrite requests that are prefixed with
# `server.basePath` or require that they are rewritten by your reverse proxy.
# This setting was effectively always `false` before Kibana 6.3 and will
# default to `true` starting in Kibana 7.0.
#server.rewriteBasePath: false

# The maximum payload size in bytes for incoming server requests.
#server.maxPayloadBytes: 1048576

# The Kibana server's name.  This is used for display purposes.
#server.name: "your-hostname"

# The URL of the Elasticsearch instance to use for all your queries.
#配置elasticsearch的访问
elasticsearch.url: "http://hadoop137:9200"

# When this setting's value is true Kibana uses the hostname specified in the server.host
# setting. When the value of this setting is false, Kibana uses the hostname of the host
# that connects to this Kibana instance.
#elasticsearch.preserveHost: true

# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
# dashboards. Kibana creates a new index if the index doesn't already exist.
#kibana.index: ".kibana"

# The default application to load.
#kibana.defaultAppId: "home"

# If your Elasticsearch is protected with basic authentication, these settings provide
# the username and password that the Kibana
1fca
server uses to perform maintenance on the Kibana
# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
# is proxied through the Kibana server.
#elasticsearch.username: "user"
#elasticsearch.password: "pass"

# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
# These settings enable SSL for outgoing requests from the Kibana server to the browser.
#server.ssl.enabled: false
#server.ssl.certificate: /path/to/your/server.crt
#server.ssl.key: /path/to/your/server.key

# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
# These files validate that your Elasticsearch backend uses the same key files.
#elasticsearch.ssl.certificate: /path/to/your/client.crt
#elasticsearch.ssl.key: /path/to/your/client.key

# Optional setting that enables you to specify a path to the PEM file for the certificate
# authority for your Elasticsearch instance.
#elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]

# To disregard the validity of SSL certificates, change this setting's value to 'none'.
#elasticsearch.ssl.verificationMode: full

# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
# the elasticsearch.requestTimeout setting.
#elasticsearch.pingTimeout: 1500

# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
# must be a positive integer.
#elasticsearch.requestTimeout: 30000

# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
# headers, set this value to [] (an empty list).
#elasticsearch.requestHeadersWhitelist: [ authorization ]

# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
#elasticsearch.customHeaders: {}

# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
#elasticsearch.shardTimeout: 30000

# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
#elasticsearch.startupTimeout: 5000

# Logs queries sent to Elasticsearch. Requires logging.verbose set to true.
#elasticsearch.logQueries: false

# Specifies the path where Kibana creates the process ID file.
#pid.file: /var/run/kibana.pid

# Enables you specify a file where Kibana stores log output.
#logging.dest: stdout

# Set the value of this setting to true to suppress all logging output.
#logging.silent: false

# Set the value of this setting to true to suppress all logging output other than error messages.
#logging.quiet: false

# Set the value of this setting to true to log all events, including system usage information
# and all requests.
#logging.verbose: false

# Set the interval in milliseconds to sample system and process performance
# metrics. Minimum is 100ms. Defaults to 5000.
#ops.interval: 5000

# The default locale. This locale can be used in certain circumstances to substitute any missing
# translations.
#i18n.defaultLocale: "en"