iOS的音频文件的格式转换

背景

因为我的公司需要设计到app与硬件的通信，所以去年深入的研究了一下音频各种格式的转换，曾写过一篇简书(https://www.jianshu.com/p/2937ab95c0f2)，现在搬过来丰富下自己的blog。

首先介绍一下常用的音频文件格式

.amr：体积很小，1秒到约为1kb，所以音质缩水也很厉害，一般用于手机铃声或彩信

.mp3：比较流行的，有损音频，某些部分失真，，音质随码率的提高，越高越好

.wav：为无损音频

.pcm：无损的wav文件中音频数据的一种编码方式
由于App是通过AVAudioRecorder录制音频，默认格式为pcm,文件比较大,所以不适合用于聊天通信的文件格式，所以最优的选择是转换成amr格式

音频格式转换方式

.pcm-->.wav-->.amr    a)将pcm转成wav

        http://www.jianshu.com/p/1d1f893e53e9这里详细写了pcm和wav的区别，我简单概括成pcm少了一个wav头描述信息。为此我从讯飞语音的sdk中移植出填写wav头的函数并修改了一下// 为pcm文件写入wav头
+ (NSData*) writeWavHead:(NSData *)audioData {
long sampleRate = [[self GetAudioRecorderSettingDict][AVSampleRateKey] longValue];
long numOfChannelsKey = [[self GetAudioRecorderSettingDict][AVNumberOfChannelsKey] longValue];
Byte waveHead[44];
waveHead[0] = 'R';
waveHead[1] = 'I';
waveHead[2] = 'F';
waveHead[3] = 'F';

long totalDatalength = [audioData length] + 44;
waveHead[4] = (Byte)(totalDatalength & 0xff);
waveHead[5] = (Byte)((totalDatalength >> 8) & 0xff);
waveHead[6] = (Byte)((totalDatalength >> 16) & 0xff);
waveHead[7] = (Byte)((totalDatalength >> 24) & 0xff);

waveHead[8] = 'W';
waveHead[9] = 'A';
waveHead[10] = 'V';
waveHead[11] = 'E';

waveHead[12] = 'f';
waveHead[13] = 'm';
waveHead[14] = 't';
waveHead[15] = ' ';

waveHead[16] = 16; //size of 'fmt '
waveHead[17] = 0;
waveHead[18] = 0;
waveHead[19] = 0;

waveHead[20] = 1; //format
waveHead[21] = 0;

waveHead[22] = numOfChannelsKey; //chanel
waveHead[23] = 0;

waveHead[24] = (Byte)(sampleRate & 0xff);
waveHead[25] = (Byte)((sampleRate >> 8) & 0xff);
waveHead[26] = (Byte)((sampleRate >> 16) & 0xff);
waveHead[27] = (Byte)((sampleRate >> 24) & 0xff);

long byteRate = sampleRate * 2 * (16 >> 3);;
waveHead[28] = (Byte)(byteRate & 0xff);
waveHead[29] = (Byte)((byteRate >> 8) & 0xff);
waveHead[30] = (Byte)((byteRate >> 16) & 0xff);
waveHead[31] = (Byte)((byteRate >> 24) & 0xff);

waveHead[32] = 2*(16 >> 3);
waveHead[33] = 0;

waveHead[34] = 16;
waveHead[35] = 0;

waveHead[36] = 'd';
waveHead[37] = 'a';
waveHead[38] = 't';
waveHead[39] = 'a';

long totalAudiolength = [audioData length];

waveHead[40] = (Byte)(totalAudiolength & 0xff);
waveHead[41] = (Byte)((totalAudiolength >> 8) & 0xff);
waveHead[42] = (Byte)((totalAudiolength >> 16) & 0xff);
waveHead[43] = (Byte)((totalAudiolength >> 24) & 0xff);

NSMutableData *pcmData = [[NSMutableData alloc]initWithBytes:&waveHead length:sizeof(waveHead)];
[pcmData appendData:audioData];

return pcmData;
// [pcmData writeToFile:kVoiceWav atomically:true];

}        同时还需把关键的属性抽取出来(如:采样率,通道数…)
//录音格式的设置
+ (NSDictionary*)GetAudioRecorderSettingDict{
NSDictionary *recordSetting = [[NSDictionary alloc] initWithObjectsAndKeys:
[NSNumber numberWithFloat: 8000],AVSampleRateKey, //采样率
[NSNumber numberWithInt: kAudioFormatLinearPCM],AVFormatIDKey,
[NSNumber numberWithInt:16],AVLinearPCMBitDepthKey,//采样位数 默认 16
[NSNumber numberWithInt: 2], AVNumberOfChannelsKey,//通道的数目
nil];
return recordSetting;
}    b)将wav转成amr

        使用VoiceConvert(by:Tang Xiaoping)库能将wav转成amr，后来发现环信的EaseUI框架中也使用了这个
        反过来转换也是差不多的
pcm<--->mp3    这个就很简单了，用lame的框架进行转换，这个框架网上资料一大堆

本人为此花了不少时间整理了一下这些文件格式的转换方法

/**
*  转换wav到amr
*
*  @param wavPath  wav文件路径
*  @param isDelete 转换成功后是否删除源文件
*
*  @return NO 失败 YES成功
*/
+ (BOOL) wav2Amr:(NSString *)wavPath isDeleteSourchFile:(BOOL)isDelete;

/**
*  转换amr到wav
*
*  @param amrPath  amr文件路径
*  @param isDelete 转换成功后是否删除源文件
*
*  @return NO 失败 YES成功
*/
+ (BOOL) amr2Wav:(NSString *)amrPath isDeleteSourchFile:(BOOL)isDelete;

/**
*  转换pcm到mp3
*
*  @param pcmPath  pcm文件路径
*  @param isDelete 转换成功后是否删除源文件
*
*  @return NO 失败 YES成功
*/
+ (BOOL) pcm2Mp3: (NSString *)pcmPath isDeleteSourchFile:(BOOL)isDelete;
/**
*  转换pcm到wav
*
*  @param pcmPath  pcm文件路径
*  @param isDelete 转换成功后是否删除源文件
*
*  @return NO 失败 YES成功
*/
+ (BOOL) pcm2Wav: (NSString *)pcmPath isDeleteSourchFile:(BOOL)isDelete;

/**
*  转换pcm到amr
*
*  @param pcmPath  pcm文件路径
*  @param isDelete 转换成功后是否删除源文件
*
*  @return NO 失败 YES成功
*/
+ (BOOL) pcm2Amr:(NSString *)pcmPath isDeleteSourchFile:(BOOL)isDelete;

/**
*  为pcm文件写入wav头
*/
+ (NSData*) writeWavHead:(NSData *)audioData;
8d10
void conventToMp3(NSString *pcmFile,NSString *mp3File);

/**
录音格式设置,转换的时候需要获取.(如:采样率、采样位数、通道的数目)
建议使用此设置，如有修改，则转换amr时也要对应修改参数，比较麻烦

@returns 录音设置
*/
+ (NSDictionary*)GetAudioRecorderSettingDict;

demo的下载地址https://github.com/qq631192328/PFAudio.git，如果觉得好麻烦点下星，如果有什么问题欢迎指正