linux 网络性能测试工具iperf

Iperf介绍

    iperf是一个基于TCP/IP和UDP/IP的网络性能测试工具，用于检测网络带宽使用率和网络质量，能测试最大TCP和UDP带宽性能，可以报告带宽、网络延迟抖动、数据包丢失率和最大传输单元等统计信息等。如测试服务器和网络设备如路由器，交换机，防火墙等的网络性能。

Iperf的主要功能

1、TCP方面

测试网络带宽

支持多线程，在客户端与服务端支持多重连接

报告MSS/MTU值大小

支持TCP窗口值自定义并可通过套接字缓冲

2、UDP方面

可以设置指定带宽的UDP数据流

可以测试网络抖动值、丢包数

支持多播测试

支持多线程，在客户端与服务器端支持多重连接

Iperf的安装

1、下载源码包，官方地址：https://iperf.fr/iperf-download.php

2、安装

3、参数（iperf3 -h）

Iperf应用实例

    iperf是以C/S模式工作，运行于服务端和客户端下。服务端主要用于监听到达的测试请求，而客户端主要用于发起连接会话。因此要使用iperf，需要两台服务器，一台运行在服务器模式下，一台运行在客户端模式下。

1、测试TCP吞吐量

启动一个服务器端，使用iperf -s命令，默认监听5201端口，在客户端使用iperf -c +服务端ip，运行测试（这里使用web1作为服务端，web2作为客户端）



服务端自动接收客户端的连接请求





    由输出结果看出，iperf默认输出10s的状态，Transfer列输出每秒的数量量在370MB左右，Bandwidth列显示网卡的速率

2、指定iperf的运行时间（-t参数）和输出速率（-i参数）

##指定20秒内每隔5秒输出一次结果
[root@web2 ~]# iperf3 -c 192.168.1.250 -t 20 -i 5
Connecting to host 192.168.1.250, port 5201
[  4] local 192.168.1.209 port 55780 connected to 192.168.1.250 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-5.00   sec  1.79 GBytes  3.07 Gbits/sec    0   1.07 MBytes
[  4]   5.00-10.00  sec  1.85 GBytes  3.18 Gbits/sec    0   1.16 MBytes
[  4]  10.00-15.00  sec  1.83 GBytes  3.14 Gbits/sec    0   1.20 MBytes
[  4]  15.00-20.00  sec  1.78 GBytes  3.06 Gbits/sec    0   1.24 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-20.00  sec  7.25 GBytes  3.11 Gbits/sec    0             sender
[  4]   0.00-20.00  sec  7.24 GBytes  3.11 Gbits/sec                  receiver

iperf Done.

3、指定发送数据量（-n参数）

#指定发送一个5GB左右的数据包，并且每隔2秒输出状态结果
[root@web2 ~]# iperf3 -c 192.168.1.250 -i 2 -n 5000000000
Connecting to host 192.168.1.250, port 5201
[  4] local 192.168.1.209 port 56432 connected to 192.168.1.250 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-2.00   sec   758 MBytes  3.18 Gbits/sec    0    952 KBytes
[  4]   2.00-4.00   sec   769 MBytes  3.23 Gbits/sec    0    984 KBytes
[  4]   4.00-6.00   sec   757 MBytes  3.17 Gbits/sec    0   1.01 MBytes
[  4]   6.00-8.00   sec   684 MBytes  2.87 Gbits/sec    0   1.05 MBytes
d2a1

[  4]   8.00-10.00  sec   734 MBytes  3.08 Gbits/sec    0   1.08 MBytes
[  4]  10.00-12.00  sec   754 MBytes  3.16 Gbits/sec    0   1.11 MBytes
[  4]  12.00-12.88  sec   313 MBytes  2.99 Gbits/sec    0   1.12 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-12.88  sec  4.66 GBytes  3.11 Gbits/sec    0             sender
[  4]   0.00-12.88  sec  4.65 GBytes  3.10 Gbits/sec                  receiver

iperf Done.

##指定一个文件传输（-F）

[root@web2 ~]# du -sh ntopng-2.2.tar.gz
88M ntopng-2.2.tar.gz

[root@web2 ~]# iperf3 -c 192.168.1.250 -F ntopng-2.2.tar.gz -t 20-i 2
Connecting to host 192.168.1.250, port 5201
[ 4] local 192.168.1.209 port 56948 connected to 192.168.1.250 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-0.12 sec 36.7 MBytes 2.47 Gbits/sec 0 420 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-0.12 sec 36.7 MBytes 2.47 Gbits/sec 0 sender
Sent 36.7 MByte / 87.1 MByte (42%) of ntopng-2.2.tar.gz
[ 4] 0.00-0.12 sec 34.9 MBytes 2.36 Gbits/sec receiver

iperf Done.

4、指定多线程网络传输测试（-P），同时可以使用-f M参数将结果通过MBytes/sec来显示

#使用单线程传输，传输10GB的数据一共消耗了27.36秒，平均速率为350 MBytes/sec
[root@web2 ~]# iperf3 -c 192.168.1.250 -n 10000000000 -i 5 -f M
Connecting to host 192.168.1.250, port 5201
[  4] local 192.168.1.209 port 57348 connected to 192.168.1.250 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-5.00   sec  1.58 GBytes   324 MBytes/sec    0   1.11 MBytes
[  4]   5.00-10.00  sec  1.62 GBytes   333 MBytes/sec    0   1.21 MBytes
[  4]  10.00-15.00  sec  1.65 GBytes   339 MBytes/sec    0   1.27 MBytes
[  4]  15.00-20.00  sec  1.76 GBytes   361 MBytes/sec    0   1.31 MBytes
[  4]  20.00-25.00  sec  1.82 GBytes   373 MBytes/sec   37   1.32 MBytes
[  4]  25.00-27.36  sec   886 MBytes   376 MBytes/sec    0   1.35 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-27.36  sec  9.31 GBytes   349 MBytes/sec   37             sender
[  4]   0.00-27.36  sec  9.31 GBytes   348 MBytes/sec                  receiver

iperf Done.

[root@web2 ~]# iperf3 -c 192.168.1.250 -n 10000000000 -i 5
Connecting to host 192.168.1.250, port 5201
[  4] local 192.168.1.209 port 57585 connected to 192.168.1.250 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-5.00   sec  1.87 GBytes  3.21 Gbits/sec    0    990 KBytes
[  4]   5.00-10.00  sec  1.87 GBytes  3.22 Gbits/sec    0   1.04 MBytes
[  4]  10.00-15.00  sec  1.81 GBytes  3.12 Gbits/sec    0   1.12 MBytes
[  4]  15.00-20.00  sec  1.75 GBytes  3.01 Gbits/sec    0   1.20 MBytes
[  4]  20.00-25.00  sec  1.76 GBytes  3.03 Gbits/sec   14   1.37 MBytes
[  4]  25.00-25.81  sec   245 MBytes  2.53 Gbits/sec    0   1.38 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-25.81  sec  9.31 GBytes  3.10 Gbits/sec   14             sender
[  4]   0.00-25.81  sec  9.31 GBytes  3.10 Gbits/sec                  receiver

iperf Done.

5、指定多线程传输

[root@web2 ~]# iperf3 -c 192.168.1.250 -n 10000000000 -i 5 -P 2 -f M
Connecting to host 192.168.1.250, port 5201
[  4] local 192.168.1.209 port 57751 connected to 192.168.1.250 port 5201
[  6] local 192.168.1.209 port 57752 connected to 192.168.1.250 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-5.00   sec   905 MBytes   181 MBytes/sec    0    585 KBytes
[  6]   0.00-5.00   sec   903 MBytes   181 MBytes/sec    0    602 KBytes
[SUM]   0.00-5.00   sec  1.77 GBytes   362 MBytes/sec    0
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]   5.00-10.00  sec   917 MBytes   183 MBytes/sec    0    687 KBytes
[  6]   5.00-10.00  sec   917 MBytes   183 MBytes/sec    0    704 KBytes
[SUM]   5.00-10.00  sec  1.79 GBytes   367 MBytes/sec    0
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]  10.00-15.00  sec   929 MBytes   186 MBytes/sec    0    723 KBytes
[  6]  10.00-15.00  sec   929 MBytes   186 MBytes/sec    0    735 KBytes
[SUM]  10.00-15.00  sec  1.81 GBytes   372 MBytes/sec    0
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]  15.00-20.00  sec   921 MBytes   184 MBytes/sec    0    745 KBytes
[  6]  15.00-20.00  sec   920 MBytes   184 MBytes/sec    0    759 KBytes
[SUM]  15.00-20.00  sec  1.80 GBytes   368 MBytes/sec    0
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]  20.00-25.00  sec   919 MBytes   184 MBytes/sec    0    782 KBytes
[  6]  20.00-25.00  sec   919 MBytes   184 MBytes/sec    0    802 KBytes
[SUM]  20.00-25.00  sec  1.79 GBytes   368 MBytes/sec    0
- - - - - - - - - - - - - - - - - - - - - - - - -
[  4]  25.00-25.97  sec   179 MBytes   184 MBytes/sec    0    785 KBytes
[  6]  25.00-25.97  sec   180 MBytes   185 MBytes/sec    0    803 KBytes
[SUM]  25.00-25.97  sec   359 MBytes   369 MBytes/sec    0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-25.97  sec  4.66 GBytes   184 MBytes/sec    0             sender
[  4]   0.00-25.97  sec  4.65 GBytes   183 MBytes/sec                  receiver
[  6]   0.00-25.97  sec  4.66 GBytes   184 MBytes/sec    0             sender
[  6]   0.00-25.97  sec  4.65 GBytes   183 MBytes/sec                  receiver
[SUM]   0.00-25.97  sec  9.31 GBytes   367 MBytes/sec    0             sender
[SUM]   0.00-25.97  sec  9.30 GBytes   367 MBytes/sec                  receiver

iperf Done.

6、测试UDP丢包和延迟，使用-u参数指定UDP协议，-b（K|M|G）参数指定UD式使用的带宽模式

[root@web2 ~]# iperf3 -c 192.168.1.250 -u -b 1G -f M -i 2
Connecting to host 192.168.1.250, port 5201
[  4] local 192.168.1.209 port 45424 connected to 192.168.1.250 port 5201
[ ID] Interval           Transfer     Bandwidth       Total Datagrams
[  4]   0.00-2.00   sec  81.1 MBytes  40.5 MBytes/sec  10377
[  4]   2.00-4.00   sec  94.5 MBytes  47.3 MBytes/sec  12102
[  4]   4.00-6.00   sec  94.6 MBytes  47.3 MBytes/sec  12107
[  4]   6.00-8.00   sec   103 MBytes  51.5 MBytes/sec  13192
[  4]   8.00-10.00  sec  93.6 MBytes  46.8 MBytes/sec  11983
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  4]   0.00-10.00  sec   467 MBytes  46.7 MBytes/sec  0.037 ms  435/59760 (0.73%)
[  4] Sent 59760 datagrams

iperf Done.

由输出结果显示，Jitter表示抖动时间，或者称为传输延迟，Lost/Total表示丢失的数据包和总的数据包数量，Datagrams表示总共传输数据包的数量

#在服务端的输出
Accepted connection from 192.168.1.209, port 58179
[  5] local 192.168.1.250 port 5201 connected to 192.168.1.209 port 45424
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  5]   0.00-1.00   sec  35.6 MBytes   299 Mbits/sec  0.054 ms  29/4590 (0.63%)
[  5]   1.00-2.00   sec  43.0 MBytes   361 Mbits/sec  0.071 ms  30/5533 (0.54%)
[  5]   2.00-3.00   sec  48.4 MBytes   406 Mbits/sec  0.154 ms  29/6225 (0.47%)
[  5]   3.00-4.00   sec  45.6 MBytes   382 Mbits/sec  0.026 ms  6/5837 (0.1%)
[  5]   4.00-5.00   sec  47.3 MBytes   397 Mbits/sec  0.168 ms  124/6183 (2%)
[  5]   5.00-6.00   sec  46.1 MBytes   387 Mbits/sec  0.023 ms  40/5941 (0.67%)
[  5]   6.00-7.00   sec  49.0 MBytes   411 Mbits/sec  0.022 ms  48/6322 (0.76%)
[  5]   7.00-8.00   sec  53.1 MBytes   446 Mbits/sec  0.037 ms  67/6867 (0.98%)
[  5]   8.00-9.00   sec  44.9 MBytes   376 Mbits/sec  0.163 ms  26/5769 (0.45%)
[  5]   9.00-10.00  sec  48.4 MBytes   406 Mbits/sec  0.015 ms  36/6232 (0.58%)
[  5]  10.00-10.04  sec  2.04 MBytes   426 Mbits/sec  0.037 ms  0/261 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Jitter    Lost/Total Datagrams
[  5]   0.00-10.04  sec  0.00 Bytes  0.00 bits/sec  0.037 ms  435/59760 (0.73%)
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------